| 1 | Amusement Machines and Personal Service Machines |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 2 | Personal-eTransporters |
IS 302 (Part 1): 2024 / IEC 60335-1: 2020 |
Mandatory |
| 3 | Beauty Care Appliances Incorporating Lasers and Intense Light Sources |
IS 302 (Part 1): 2024 / IEC 60335-1 |
Mandatory |
| 4 | Electrolysers |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 5 | Gas, Oil and Solid-Fuel Burning Appliances Having Electrical Connections |
IS 302 Part 1:2024, which follows IEC 60335-1 |
Mandatory |
| 6 | Vaporizers |
IS 302(Part 1):2024 and IEC 60335-1:2020 |
Mandatory |
| 7 | Commercial Electric Hoods |
IS 302 Part 1:2024/IEC 60335-1 |
Voluntary |
| 8 | Humidifiers |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 9 | Drives for Vertically Moving Garage Doors for Residential Use |
IS 302 (Part 1):2024 / IEC 60335-1:2020 |
Mandatory |
| 10 | Fabric Steamer |
IS 302 (Part 1): 2024 |
Mandatory |
| 11 | Toilet Appliances |
IS 302 Part 1 |
Mandatory |
| 12 | Low Speed Food Grinding Machines |
IS 302 (Part 1) |
Mandatory |
| 13 | Heating Liquid Appliances |
IS 302 Part 1 |
Mandatory |
| 14 | DC supplied/ battery-operated Air Purifier |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 15 | DC supplied/ battery-operated foot warmers and heating mats |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 16 | DC Supplied/ Battery-Operated Toothbrush and Other Oral Hygiene Appliances |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 17 | DC supplied/ battery-operated blenders, juicers |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 18 | DC supplied/ battery-operated Massage appliances |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 19 | Battery/DC Shavers & Trimmers |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 20 | DC Supplied/ Battery-Operated Vacuum Cleaners |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 21 | Handheld Engraving Tools |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 22 | Commercial Vacuum Packaging Appliances |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 23 | Furniture with Electrically Motorized Parts |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 24 | Skin Beauty Care Appliances |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 25 | Helmet for Riders of Two-Wheeler Motor Vehicles |
IS 4151:2015 |
Mandatory |
| 26 | Foot Warmers and Heating Mats |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 27 | Outdoor Barbecues |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 28 | Fixed Immersion Heaters |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 29 | Water- Bed Heaters |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 30 | Air-Cleaning Appliances |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 31 | Commercial Electric Kitchen Machines |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 32 | Commercial Electric Rinsing Sinks |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 33 | Thermal Storage Room Heaters |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 34 | Whirlpool Baths and Whirlpool Spas |
IS 302 Part 1:2024 /IEC 60335-1 |
Mandatory |
| 35 | Commercial Electric Bains Marie |
IS 302 Part 1: 2024 |
Mandatory |
| 36 | Commercial Electric Dishwashing Machines |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 37 | Electrical Appliances for use with Aquariums and Garden Ponds |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 38 | Surface Cleaning Appliances (Liquid/Steam) |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 39 | Sauna Heating Appliances and Infrared Cabins |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 40 | Oral Hygiene Appliances |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 41 | Commercial Electric Appliances for keeping Food and Crockery Warm |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 42 | Commercial Electric Grillers & Toasters |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 43 | Commercial Electric Boiling Pans |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 44 | Clothes Dryers & Towel Rails |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 45 | Commercial Electric Multi-purpose Cooking Pans |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 46 | Commercial Electric Griddles and Griddle Grills |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 47 | Commercial Electric Doughnut Fryers and Deep Fat Fryers |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 48 | Appliances for Skin Exposure to Optical Radiation |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 49 | Commercial Electric Cooking Ranges, Ovens, Hobs and Hob Elements IS 302 Part 1: 2024/IEC 60335-1 |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 50 | Blankets, Pads, Clothing and Similar Flexible Heating Appliances |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 51 | Food Waste Disposers |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 52 | Floor Treatment Machines and Wet Scrubbing Machines |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 53 | Dishwashers |
ishwashers IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 54 | Single-Walled Baking Ovens |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 55 | Slicing Machines |
IS 302 Part 1:2024/IEC 60335-1 |
Mandatory |
| 56 | Electric Hot Plates |
IS 302 Part 1: 2024/IEC 60335-1 |
Mandatory |
| 57 | Electric Sieving Machines |
IS 302 (Part 1) |
Mandatory |
| 58 | Electric Shredders |
IS 302 Part 1 IEC 60335-1/2024 |
Mandatory |
| 59 | Heating Liquid Appliances |
IS 302 (Part 1): 2024 |
Mandatory |
| 60 | Electric Water Boilers |
IS 302 (Part 1): 2024 / IEC 60335-1 |
Mandatory |
| 61 | Spin Extractor |
IS 302 (Part 1):2024 |
Mandatory |
| 62 | Electric Noodle Makers |
IS 302 Part 1 / IEC 60335-1 |
Mandatory |
| 63 | Electric Potato Peelers |
IS 302 Part-1/IEC 60335-1 |
Mandatory |
| 64 | Electric Knives |
IS 302 (Part 1) IEC 60335-1 |
Mandatory |
| 65 | Electric Knife Sharpeners |
IS 302 Part 1/IEC 60335-1 |
Mandatory |
| 66 | Electric Ice-Cream Machines |
IS 302 Part 1 |
Mandatory |
| 67 | Electric Graters |
IS 302 (Part 1) IEC 60335-1 |
Mandatory |
| 68 | Electric Grain Grinders not exceeding 3l hopper capacity |
IS 302 Part 1 IEC 60335 |
Mandatory |
| 69 | Electric Food Processors |
IS 302 (Part 1/IEC 60335-1) |
Mandatory |
| 70 | Electric Egg Beaters |
IS 302 (Part 1/IEC 60335-1) |
Mandatory |
| 71 | Electric Cream Whippers |
IS 302 Part 1/ IEC 60335-1 |
Mandatory |
| 72 | Electric Coffee Mills not exceeding 500g hopper capacity |
IS 302 Part 1 |
Mandatory |
| 73 | Electric Citrus Fruit Squeezers |
IS 302 Part 1:2024 / IEC 60335-1 |
Mandatory |
| 74 | Electric Churns |
IS 302 (Part 1/IEC 60335-1) |
Mandatory |
| 75 | Electric Centrifugal Juicers |
IS 302 Part-1 |
Mandatory |
| 76 | Electric Can Openers |
IS 302 (Part 1/IEC 60335-1) |
Mandatory |
| 77 | Electric Berryjuice Extractors |
IS 302 Part 1: IEC 60335-1 |
Mandatory |
| 78 | Electric Bean Slicers |
IS 302 (Part 1/IEC 60335-1) |
Mandatory |
| 79 | Electric Coffee Makers |
IS 302 (Part 1/IEC 60335-1) |
Mandatory |
| 80 | Bullet Resistant Jackets |
IS 17051 |
Mandatory |
| 81 | Electric Call Bells and Buzzers |
IS 302 (Part 1)/IEC 60335-1 |
Mandatory |
| 82 | Electric Heating Tools |
IS 302 (Part 1)/IEC 60335-1 |
Mandatory |
| 83 | Electric Forced Convection Ovens & Steam Cookers |
IS 302 Part 1 / IEC 60335-1 |
Mandatory |
| 84 | Massage Appliances |
IS 302 Part 1/ IEC 60335-1 |
Mandatory |
| 85 | Heating Liquid Appliances |
IS 302 (Part 1)/IEC 60335-1 |
Mandatory |
| 86 | Warming Plates and Similar Appliances |
IS 302 (Part 1)/IEC 60335-1 |
Mandatory |
| 87 | Tumbler Dryers |
IS 302 (Part 1)/IEC 60335-1 |
Mandatory |
| 88 | Vacuum Cleaners and Water Suction Cleaning Appliances |
IS 302(Part 1)/IEC 60335-1 |
Mandatory |
| 89 | Commercial Dispensing Appliances and Vending Machines |
IS 302 (Part 2/Sec 75) |
Mandatory |
| 90 | Storage-Type Electric Water Heaters |
IS 302 (Part 2/Sec21) |
Mandatory |
| 91 | Domestic Electric Clothes Washing Machines |
IS 302 (Part 2/Sec 7) |
Mandatory |
| 92 | Fans |
IS 302 (Part 2/ Sec 80) |
Mandatory |
| 93 | Skin or Hair Care |
IS 302 (Part 2/Sec 23) |
Mandatory |
| 94 | Safety of Household and Similar Electrical Appliances – Range Hoods |
IS 302 (Part 2/Sec 31) |
Mandatory |
| 95 | Toasters, Grills, Roasters, and Similar Appliances |
IS 302 (Part 2/Sec 9) |
Mandatory |
| 96 | Insect Killers |
IS 302 Part-1 |
Mandatory |
| 97 | Electric Steam Cookers |
IS 302 (Part 1)/IEC 60335-1 |
Mandatory |
| 98 | Frying Pans, Deep Fat Fryers and Similar Appliances |
IS 302 (Part 1) IEC 60335-1 |
Mandatory |
| 99 | Electrical Shavers, Hair Clippers, and Similar products |
IS 302 (Part 1) |
Mandatory |
| 100 | Petroleum and Natural Gas Industries- Steel Drilling Pipes |
IS 19112 |
Mandatory |
| 101 | Petroleum and Natural Gas Industries -Steel Pipes for Use as Casing or Tubing for Wells |
IS 19111 |
Mandatory |
| 102 | Seamless Steel Tubes for Manufacturing High-Pressure Gas Cylinders |
IS 12620 |
Mandatory |
| 103 | Petroleum and Natural Gas Industries Steel Pipe for Pipeline |
IS 3183 |
Mandatory |
| 104 | Cast Iron Specials for Mechanical and Push-on Flexible Joints for Pressure Pipes for Water, Gas, and Sewage |
IS 13382 |
Mandatory |
| 105 | Cast Iron fittings for pressure pipes for water, gas, and sewage |
IS 1538 |
Mandatory |
| 106 | Horizontally cast iron double flanged pipes for water, gas, and sewage |
IS 7181 |
Mandatory |
| 107 | Spiral Welded Pipes |
IS 5504 |
Mandatory |
| 108 | Countersunk Flat Head Screws Type H or Type Z Cross Recess Grade A (Part 1) Steel Screws of Property Class 4.8 IS 7485 (Part-1) |
IS 7485 (Part-1) |
Mandatory |
| 109 | Plain Bearings Ring Type Thrust Washers Made from Strip |
IS 9764 (Part 1) |
Mandatory |
| 110 | Aluminium Alloy Redraw Rods for Electrical Purposes |
IS 9997 |
Mandatory |
| 111 | Aluminium Alloy Hardeners (Master Alloys) |
IS 2047 |
Mandatory |
| 112 | Aluminium Alloy Milk Can |
IS 1825 |
Mandatory |
| 113 | Porous Metal Powder Oil Impregnated Bearings |
IS 3980 |
Mandatory |
| 114 | Plain Bearings Pressed Bimetallic Half Thrust Washers |
IS 9764 Part 2 |
Mandatory |
| 115 | Ring Type Needle Bearings |
IS 4215 |
Mandatory |
| 116 | Plain Bearings -Thick - Walled Bushes, Plain and Flange Type, Full -Round (Without Any Joint Or Slit) |
IS 14478 |
Mandatory |
| 117 | Thin-Walled Plain Bearings |
IS 10203 |
Mandatory |
| 118 | Double Row Cylindrical Roller Bearings |
IS 6458 |
Mandatory |
| 119 | Single Row Cylindrical Roller Bearings |
IS 6457 |
Mandatory |
| 120 | Double Row Radial Ball Bearings |
IS 6456 |
Mandatory |
| 121 | Single Row Deep Groove Ball Bearings |
IS 6455 |
Mandatory |
| 122 | Self-Aligning Roller Bearings |
IS 6454 |
Mandatory |
| 123 | Mini Domestic Water Heater for Use with Piped Natural Gas (PNG) |
IS 17150 |
Mandatory |
| 124 | Tin Ingot |
IS 26 |
Mandatory |
| 125 | Primary Lead |
IS 27 |
Mandatory |
| 126 | Refined Nickel |
IS 2782 |
Mandatory |
| 127 | Refined Zinc |
IS 209 |
Mandatory |
| 128 | Countersunk Head Wood Screws |
IS 18509 |
Mandatory |
| 129 | Chipboard Screws |
IS 18508 |
Mandatory |
| 130 | Drywall Screws |
IS 18507 |
Mandatory |
| 131 | Raised countersunk head screws (Common Head Style) with type H or type Z cross recess – Product grade A |
IS 7486 |
Mandatory |
| 132 | Countersunk flat head screws (Common Head Style) with type H or Type Z Cross Recess – Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non – Ferrous Metal Screws |
IS 7485 (Part 2) |
Mandatory |
| 133 | Pan Head Screws With Type H or Type Z Cross Recess – Product Grade A |
IS 7483 |
Mandatory |
| 134 | Cross Recessed Tapping Screw Raised Countersunk Oval Head |
IS 18480 (Part-3) |
Mandatory |
| 135 | Cross Recessed Tapping Screws Part 2 Countersunk Flat Head |
IS 18480 (Part 2) |
Mandatory |
| 136 | Rolling Bearings Accessories Dimensions for Locknuts and Locking Devices |
IS 16605 Part-2 |
Mandatory |
| 137 | Cross Recessed Tapping Screws: Part 1 Pan Head |
IS 18480 |
Mandatory |
| 138 | Fasteners – Hexagon Washer Head Drilling Screws with Tapping Screw Thread |
IS 18476 |
Mandatory |
| 139 | Fasteners – Cross Recessed Drilling Screws with Tapping Screw Thread Raised Countersunk Head |
IS 18471 Part 3 |
Mandatory |
| 140 | Fasteners – Cross Recessed Drilling Screws with Tapping Screw Thread Part 2 Countersunk Head |
IS 18471 Part-2 |
Mandatory |
| 141 | Fasteners Cross Recessed Drilling Screws with Tapping Screw Thread Pan Head |
IS 18471 (Part 1) |
Mandatory |
| 142 | Tapered Roller Bearings |
IS 12102 |
Mandatory |
| 143 | Round Steel Wire Rope Used as Balance Ropes Mines |
IS 18532 |
Mandatory |
| 144 | Plummer Block Housings |
IS 14347 |
Mandatory |
| 145 | Rolling Bearings Accessories |
IS 16605 Part-1 |
Mandatory |
| 146 | Bicycle Balls |
IS 15184 |
Mandatory |
| 147 | Needle Roller for Rolling Bearings |
IS 4217 |
Mandatory |
| 148 | Cylindrical Rollers for Rolling Bearings |
IS 9202 |
Mandatory |
| 149 | Ceramic Balls For Rolling Bearings |
IS 2898 Part-2 |
Mandatory |
| 150 | Steel Balls for Rolling Bearings |
IS 2898 Part-1 |
Mandatory |
| 151 | Bunk Beds |
IS 17636 |
Mandatory |
| 152 | Beds |
IS 17635 |
Mandatory |
| 153 | Storage Units |
IS 17634 |
Mandatory |
| 154 | Tables and Desks Furniture |
IS 17633 |
Mandatory |
| 155 | General-Purpose Chairs and Stools |
IS 17632 |
Mandatory |
| 156 | Work Chairs |
IS 17631 |
Mandatory |
| 157 | Flashlight |
IS 2083 |
Mandatory |
| 158 | Appliances for Electric Instantaneous Water Heaters |
IS 302 (Part 2/Sec 35) |
Mandatory |
| 159 | Electric Fence Energizers |
IS 302-2-76 |
Mandatory |
| 160 | K Acid |
IS 11557 |
Mandatory |
| 161 | H Acid |
IS 8637 |
Mandatory |
| 162 | Textiles – Flat Woven Webbing Slings Made of Man-Made Fibres for General Services |
IS 15041 |
Mandatory |
| 163 | Storage Water Tank for All Glass Evacuated Tubes Solar Water Heating Systems |
IS 16542 |
Mandatory |
| 164 | All Glass Evacuated Tubes Solar Water Heating System |
IS 16544 |
Mandatory |
| 165 | Solar Flat Plate Collector for Solar Water Heating Systems |
IS 12933 Part-2 |
Mandatory |
| 166 | Solar Flat Plate Collector for Solar Water Heating Systems |
IS 12933 Part 1 |
Mandatory |
| 167 | Fibre Ropes Polyethylene : 3- And 4-Strand Ropes |
IS 8674 |
Mandatory |
| 168 | Fibre Ropes: Polypropylene Split Film, Monofilament And Multifilament ( PP2 ) and Polypropylene High-Tenacity Multifilament ( PP3 ) -3-, 4-, 8- and 12- Strand Ropes |
IS 5175:2022 |
Mandatory |
| 169 | Fibre Ropes Of Polyester / Polyolefin dual Fibres |
IS 17609 |
Mandatory |
| 170 | Fibre Ropes Polyamide 3-, 4-, 8- and 12- Strand Ropes |
IS 4572 |
Mandatory |
| 171 | Steel Wire Ropes - Fibre Main Cores |
IS 1804 |
Mandatory |
| 172 | BIS Certification for Electric Water Heaters |
IS 2082 |
Mandatory |
| 173 | Mixed Polyolefin Fibre Ropes |
IS 14929 |
Mandatory |
| 174 | Textiles Composite Synthetic Fibre Ropes |
IS 14928 |
Mandatory |
| 175 | Fibre Ropes Polyester - 3-, 4-, 8- and 12-strand ropes |
IS 11066 |
Mandatory |
| 176 | Textiles Manila Ropes |
IS 1084 |
Mandatory |
| 177 | Vinyl Sulphone |
IS 18340 |
Mandatory |
| 178 | Specification for Combination Side Cutting Pliers |
IS 3650 |
Mandatory |
| 179 | Pipe Wrenches Heavy Duty |
IS 4003 Part 2 |
Mandatory |
| 180 | Pipe Wrenches of General Purpose |
IS 4003 Part 1 |
Mandatory |
| 181 | Ring Wrenches |
IS 2029 |
Mandatory |
| 182 | 2 - Naphthylamine - 3: 6: 8 - Tri Sulphonic Acid |
IS 11557 |
Mandatory |
| 183 | Wear Abrasion Resistant Steel and Plates |
IS 18809 |
Mandatory |
| 184 | Open-Jaw Wrenches (Spanners) |
IS 2028 |
Mandatory |
| 185 | Single-ended Open-jaw Adjustable Wrenches |
IS 6149 |
Mandatory |
| 186 | Ring Slugging Wrenches (Spanners) |
IS 4509 |
Mandatory |
| 187 | Open-Ended Slugging Wrenches (Spanners) |
IS 4508 |
Mandatory |
| 188 | Chain Pipe Wrenches |
IS 4123 |
Mandatory |
| 189 | Carbon and Low Alloy Steel Billets, Blooms, Slabs and Bars Shell Bodies and Proof Shots |
IS 14698 |
Mandatory |
| 190 | Hot - Rolled Mild Steel Sheet and Strip in Coil Form |
IS 2385 |
Mandatory |
| 191 | Steel Ingots, blooms, and billets for production of mild steel wire for production of mild steel wire rods for general engineering purposes |
IS 8952 |
Mandatory |
| 192 | Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes |
IS 7226 |
Mandatory |
| 193 | Cold Rolled Non-Oriented Electrical Steel Sheet and Strip –Semi-Processed Type Specification |
IS 15391 |
Mandatory |
| 194 | Steel Pipes For Water And Sewage |
IS 3589 |
Mandatory |
| 195 | Hollow Steel Sections For Structural Use |
IS 4923 |
Mandatory |
| 196 | Steel Tubes For Mechanical And General Engineering Purposes |
IS 3601 |
Mandatory |
| 197 | Steel Tubes For IDLERS For Belt Conveyors |
IS 9295 |
Mandatory |
| 198 | Three-Piece Round Open-Top Metal Cans for Food s and Beverages |
IS 18427 |
Mandatory |
| 199 | Steel Tubes, Tubular, and Other Steel |
IS 1239 Part-2 |
Mandatory |
| 200 | Hot Rolled And Cold Rolled Steel Strips Intended For Processing Of Semi/ Fully Processed Non-Grain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel |
IS 18316 |
Mandatory |
| 201 | Hot-Dip Zinc-Aluminium-Magnesium Alloy-Coated Steel Sheets, Plates, And Strips |
IS 18513 |
Mandatory |
| 202 | Hot-Dip Galvanized/ Galvannealed Steel Sheet And Strips For Automotive Applications |
IS 18385 |
Mandatory |
| 203 | Hot Rolled Steel Strip, Sheet, and Plates for Welded Steel Pipe for Pipeline Transportation Systems |
IS 18384 |
Mandatory |
| 204 | Electrical Appliances For Stationary Storage Type Electric Water Heaters |
IS 302 |
Mandatory |
| 205 | Electric Immersion Water Heaters |
IS 368 |
Mandatory |
| 206 | Telescopic Ball Bearing Drawer Slide |
IS 17954 |
Mandatory |
| 207 | Endless V-Belts for Industrial Purposes-Fire Resistant and Antistatic V-Belts |
IS 2494 Part-2 |
Mandatory |
| 208 | Endless V-Belts for Industrial Purposes-General Purposes |
IS 2494 Part-1 |
Mandatory |
| 209 | Transmission Devices-V-Belts Endless Narrow V-Belts for Industrial Use |
IS 14261 |
Mandatory |
| 210 | Ferrovanadium |
IS 1466 |
Mandatory |
| 211 | Ferromolybdenum |
IS 1469 |
Mandatory |
| 212 | Malleable Iron Castings |
IS 14329 |
Mandatory |
| 213 | Pig Iron |
IS 13502 |
Mandatory |
| 214 | Ductile or Sg Iron Castings |
IS 1865 |
Mandatory |
| 215 | GLASS FIBRE REINFORCED GYPSUM PANELS |
IS 17400 |
Mandatory |
| 216 | Reinforced Gypsum Plaster Boards |
IS 2095 Part-3 |
Mandatory |
| 217 | Coated and Laminated Gypsum Plaster Boards |
IS 2095 Part-2 |
Mandatory |
| 218 | Plain Gypsum Plaster Boards |
IS 2095 Part-1 |
Mandatory |
| 219 | Asbestos Cement Building Boards |
IS 2098 |
Mandatory |
| 220 | Asbestos Cement Flat Sheets |
IS 2096 |
Mandatory |
| 221 | Asbestos Cement Pressure Pipes and Joints |
IS 1592 |
Mandatory |
| 222 | Fibre Cement Flat Sheets |
IS 14862 |
Mandatory |
| 223 | Corrugated and Semi Corrugated Asbestos Cement Sheets |
IS 459 |
Mandatory |
| 224 | Diesel Engines - Nox Reduction Agent Aus 32 |
IS 17042 Part-1 |
Mandatory |
| 225 | Heat Treated Steels Alloy and Free Cutting Steels for Ball and Roller Bearing Steels |
IS 17111 |
Mandatory |
| 226 | Hot Dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement |
IS 12594 |
Mandatory |
| 227 | Galvanized Structural Steel |
IS 16732 |
Mandatory |
| 228 | Poly-Laminated Aluminium Cable Wrap |
IS 16012 |
Mandatory |
| 229 | Switch Socket Outlets (Non-Interlock Type) |
IS 15787 |
Mandatory |
| 230 | Insulation Mats for Electrical Purposes |
IS 15652 |
Mandatory |
| 231 | Live Working Gloves of Insulating Material |
IS 13774 |
Mandatory |
| 232 | CABLE TRUNKING AND DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS |
IS 14927 (Part-2) |
Mandatory |
| 233 | Electrical Boxes and Enclosures for Fixed Electrical Installations |
IS 14772 |
Mandatory |
| 234 | BAYONET LAMP HOLDERS |
IS 1258 |
Mandatory |
| 235 | Glass Beakers |
IS 2619 |
Mandatory |
| 236 | NARROW-NECKED BOILING FLASKS |
1381 (Part-1) |
Mandatory |
| 237 | SINGLE VOLUME PIPETTES |
IS 1117 |
Mandatory |
| 238 | One Mark Volumetric Flasks |
IS 915 |
Mandatory |
| 239 | Graduated Measuring Cylinders |
IS 878 |
Mandatory |
| 240 | Rubber Gaskets for Pressure Cookers |
IS 7466 |
Mandatory |
| 241 | Cycle Rubber Tubes |
IS 2415 |
Mandatory |
| 242 | Cycle and Rickshaw Tyres |
IS 2414 |
Mandatory |
| 243 | Cabinet Hinges |
IS 18297 |
Mandatory |
| 244 | Steel Back Flap Hinges |
IS 3843 |
Mandatory |
| 245 | Double Acting Spring Hinges |
IS 453 |
Mandatory |
| 246 | HDPE / PP LAMINATED WOVEN SACKS FOR MAIL SORTING, STORAGE, TRANSPORTATION AND DISTRIBUTION |
IS 17399 |
Mandatory |
| 247 | HDPE / PP WOVEN LAMINATED BLOCK BOTTOM VALVE SACKS FOR PACKAGING OF CEMENT |
IS 16709 |
Mandatory |
| 248 | HDPE/ PP Woven Sacks for Packaging of Polymer Materials |
IS 16703 |
Mandatory |
| 249 | HDPE / PP Woven Sacks for Packaging of Cement |
IS 11652 |
Mandatory |
| 250 | HDPE / PP Woven Sacks for Packaging of Fertilizers |
IS 9755 |
Mandatory |
| 251 | Braided Nylon Rope for Mountaineering Purposes |
IS 6590 |
Mandatory |
| 252 | Wire Ropes Used in Oil Wells and Oil Well Drilling |
IS 4521 |
Mandatory |
| 253 | STEEL WIRE SUSPENSION ROPES FOR LIFTS, ELEVATORS AND HOISTS |
IS 2365 |
Mandatory |
| 254 | Steel Wire Ropes for General Engineering Purposes |
IS 2266 |
Mandatory |
| 255 | HOT DIP GALVANIZED STAY STRAND |
IS 2141 |
Mandatory |
| 256 | STEEL WIRE ROPES FOR HAULAGE PURPOSES |
IS 1856 |
Mandatory |
| 257 | Stranded Steel Wire Ropes for Winding and Man-Riding Haulages in Mines |
IS 1855 |
Mandatory |
| 258 | Galvanized Steel Barbed Wire for Fencing |
IS 278 |
Mandatory |
| 259 | Non-Metal Helmet for Police Force |
IS 9562 |
Mandatory |
| 260 | Industry Safety Helmets |
IS 2925 |
Mandatory |
| 261 | NON-METAL HELMET FOR FIREMEN AND CIVIL DEFENCE |
IS 2745 |
Mandatory |
| 262 | Door Closers Concealed Type |
IS 14912 |
Mandatory |
| 263 | Door Handles for Mortice Locks |
IS 4992 |
Mandatory |
| 264 | DOOR CLOSERS PNEUMATICALLY REGULATED |
IS 6343 |
Mandatory |
| 265 | Floor Springs for Heavy Doors |
IS 6315 |
Mandatory |
| 266 | Hydraulically Regulated Door Closers |
IS 3564 |
Mandatory |
| 267 | RIM LATCHES |
IS 1019 |
Mandatory |
| 268 | DOOR HANDLES |
IS 208 |
Mandatory |
| 269 | DRUMS |
IS 13997 |
Mandatory |
| 270 | Drums Grade A |
IS 1783 Part 1 |
Mandatory |
| 271 | Drums Grade B |
IS 1783 Part 2 |
Mandatory |
| 272 | GALVANIZED AND UNGALVANIZED STEEL DRUMS |
IS 2552 |
Mandatory |
| 273 | SQUARE TINS FOR SOLID PRODUCTS |
IS 916 |
Mandatory |
| 274 | Bitumen Drums |
IS 3575 |
Mandatory |
| 275 | SQUARE TINS |
IS 10325 |
Mandatory |
| 276 | Copper Wire Rods for Electrical Applications |
IS 12444 |
Mandatory |
| 277 | Copper Rods and Bars for Electrical Purposes |
IS 613 |
Mandatory |
| 278 | Copper Strip for Electrical Purposes |
IS 1897 |
Mandatory |
| 279 | Copper Rods and Bars for General Engineering Purposes |
IS 4171 |
Mandatory |
| 280 | SOLID DRAWN COPPER AND COPPER ALLOY TUBES FOR CONDENSER AND HEAT EXCHANGERS IS 1545 |
IS 1545 |
Mandatory |
| 281 | Solid Drawn Copper Tubes for General Engineering Purposes |
IS 2501 |
Mandatory |
| 282 | Copper Tubes for Plumbing |
IS 14810 |
Mandatory |
| 283 | Wrought Copper Tubes for Refrigeration and Air Conditioning |
IS 10773 |
Mandatory |
| 284 | Copper Wires for General Engineering Purposes |
IS 4412 |
Mandatory |
| 285 | Reusable Sanitary Pad / Sanitary Napkin / Period Panties |
IS 17514 |
Mandatory |
| 286 | Disposable Baby Diaper |
IS 17509 |
Mandatory |
| 287 | Shoe Covers |
IS 17349 |
Mandatory |
| 288 | Bedsheet and Pillow Cover |
IS 17630 |
Mandatory |
| 289 | Dental Bib / Napkins |
IS 17354 |
Mandatory |
| 290 | Sanitary Napkin |
IS 5405 |
Mandatory |
| 291 | Silicomanganese |
IS 1470 |
Mandatory |
| 292 | FERROMANGANESE |
IS 1171 |
Mandatory |
| 293 | Ferrochromium |
IS 1170 |
Mandatory |
| 294 | Aluminium Alloy Forging Stock and Forgings for Aerospace Applications |
IS 7902 |
Mandatory |
| 295 | Aluminum Alloy Extruded Tubes for Irrigation Purposes |
IS 7092 Part 2 |
Mandatory |
| 296 | EC Grade Aluminium Rod Produced by Continuous |
IS 5484 |
Mandatory |
| 297 | Wrought Aluminium and Aluminium Alloy Bars, Rods, Tubes, Sections, Plates and Sheets for Electrical Applications |
IS 5082 |
Mandatory |
| 298 | Wrought Aluminium Wire for Electrical Purposes |
IS 2067 |
Mandatory |
| 299 | Wrought Aluminium and Aluminium Alloys-Extruded Round Tube and Hollow Sections for General Engineering Purposes |
IS 1285 |
Mandatory |
| 300 | Corrugated Aluminum Sheet |
IS 1254 |
Mandatory |
| 301 | Wrought Aluminum and Aluminum Alloy Rivet Stock for General Engineering Purposes |
IS 740 |
Mandatory |
| 302 | Wrought Aluminum and Aluminum Alloys Wire for General Engineering Purposes |
IS 739 |
Mandatory |
| 303 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOY PLATE FOR GENERAL ENGINEERING PURPOSES |
IS 736 |
Mandatory |
| 304 | Wrought Aluminium and Aluminium Alloy Bars, Rods and Sections for General Engineering Purposes |
IS 733 |
Mandatory |
| 305 | Aluminium Composite Panel |
IS 17682 |
Mandatory |
| 306 | Aluminium Foil for Pharmaceutical Packaging |
IS 16011 |
Mandatory |
| 307 | Aluminum Alloy Welded Tubes for Irrigation Purposes |
IS 7092 Part 1 |
Mandatory |
| 308 | Wrought Aluminium and Aluminium Alloy Sheet and Strip for General Engineering Purposes |
IS 737 |
Mandatory |
| 309 | Wrought Aluminum and Aluminum Alloy Forging Stock and Forgings |
IS 734 |
Mandatory |
| 310 | Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils |
IS 21 |
Mandatory |
| 311 | SELF CONTAINED DRINKING WATER COOLERS |
IS 1475 Part 1 |
Mandatory |
| 312 | Short-Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets |
IS 2403 |
Mandatory |
| 313 | High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement |
IS 16651 |
Mandatory |
| 314 | Bar or Wire Wrapped Steel Cylinder Pipes with Mortar Lining and Coating or Specials |
IS 15155 |
Mandatory |
| 315 | Stainless Steel Tubes for the Food and Beverage Industry |
IS 6913 |
Mandatory |
| 316 | STEEL PIPE FLANGES |
IS 6392 |
Mandatory |
| 317 | Non-Ferrous Metal Butt Hinges |
IS 205 |
Mandatory |
| 318 | Stainless Steel Butt Hinges |
IS 12817 |
Mandatory |
| 319 | Continuous Piano Hinges |
IS 3818 |
Mandatory |
| 320 | Steel Butt Hinges |
IS 1341 |
Mandatory |
| 321 | Parliament Hinges |
IS 362 |
Mandatory |
| 322 | Tee and Strap Hinges |
IS 206 |
Mandatory |
| 323 | FLUX CORED SOLDER WIRE |
IS 1921 |
Mandatory |
| 324 | Structural Plywood |
IS 10701 |
Mandatory |
| 325 | Fire Retardant Plywood |
IS 5509 |
Mandatory |
| 326 | Plywood for Concrete Shuttering Works |
IS 4990 |
Mandatory |
| 327 | Wooden Flush Door Shutters Solid Core Type |
IS 2202 Part-2 |
Mandatory |
| 328 | Wooden Flush Door Shutters (Solid Core Type) - Plywood Face Panels |
IS 2202 Part-1 |
Mandatory |
| 329 | BIS certification for Wooden Flush Door Shutters |
IS 2191 Part-2 |
Mandatory |
| 330 | Wooden Flush Door Shutters (Cellular, Hollow and Tubular Core Type) -Plywood Face Panels |
IS 2191 Part-1 |
Mandatory |
| 331 | Veneered Decorative Plywood |
IS 1328 |
Mandatory |
| 332 | Marine Plywood |
IS 710 |
Mandatory |
| 333 | Plywood for General Purposes |
IS 303 |
Mandatory |
| 334 | Stainless Steel Seamless Pipes and Tubes for General Services |
IS 17875 |
Mandatory |
| 335 | Stainless Steel Welded Pipes and Tubes for General Service |
IS 17876 |
Mandatory |
| 336 | CPVC FITTINGS FOR HOT AND COLD WATER SUPPLIES |
IS 17546 |
Mandatory |
| 337 | Tile Adhesive |
IS 15477 |
Mandatory |
| 338 | NON-PRESSURE UPVC PIPES FOR DRAINAGE AND SEWERAGE |
IS 15328 |
Mandatory |
| 339 | UPVC PIPES FOR SOIL AND WASTE DISCHARGE |
IS 13592 |
Mandatory |
| 340 | PVC Water Storage Tank |
IS 12701 |
Mandatory |
| 341 | UPVC Drainage Pipes |
IS 9271 |
Mandatory |
| 342 | UPVC Pipes for Potable Water Supply |
IS 4985 |
Mandatory |
| 343 | HDPE Pipes for Potable Water Supply |
IS 4984 |
Mandatory |
| 344 | AAC BLOCK |
IS 2185 Part 3 |
Mandatory |
| 345 | Wall Putty |
IS 17545 |
Mandatory |
| 346 | CPVC PIPES FOR POTABLE HOT AND COLD WATER SUPPLIES |
IS 15778 |
Mandatory |
| 347 | UPVC Screen and Casing Pipes for Bore and Tubewells |
IS 12818 |
Mandatory |
| 348 | PVC Conduit Pipe |
IS 9537 Part 3 |
Mandatory |
| 349 | Concrete Admixtures |
IS 9103 |
Mandatory |
| 350 | Integral Waterproofing Compound |
IS 2645 |
Mandatory |
| 351 | Thermosetting Insulated, Fire Survival Cables |
IS 17505 Part-1 |
Mandatory |
| 352 | ELECTRIC CABLES FOR PHOTOVOLTAIC SYSTEMS FOR RATED VOLTAGE 1500 V |
IS 17293 |
Mandatory |
| 353 | High purity primary aluminum ingot for remelting for special applications |
IS 11890 |
Mandatory |
| 354 | NICKEL POWDER |
IS 7506 |
Mandatory |
| 355 | Cast Alloy or Wrought Alloy Aluminium Ingots for Remelting for General Engineering Purpose |
IS 6754 |
Mandatory |
| 356 | Aluminum Ingots Billets and Wire Bars |
IS 4026 |
Mandatory |
| 357 | Primary Aluminum Ingots for remelting |
IS 2590 |
Mandatory |
| 358 | Cast Aluminum and its Alloys - Ingots and Castings for General Engineering Purposes |
IS 617 |
Mandatory |
| 359 | COPPER |
IS 191 |
Mandatory |
| 360 | Polyvinyl Chloride (PVC) Homopolymers |
IS 17658 |
Mandatory |
| 361 | Polypropylene (PP) Materials for Moulding and Extrusion |
IS 10951 |
Mandatory |
| 362 | ELECTRIC CEILING FANS |
IS 374 |
Mandatory |
| 363 | CAST IRON SINGLE FACED THIMBLE MOUNTED SLUICE GATES |
IS 13349 |
Mandatory |
| 364 | Malleable Cast Iron Pipe Fittings |
IS 1879 |
Mandatory |
| 365 | Cast Iron or Ductile Iron Drainage Pipes and Pipe Fittings |
IS 1729 |
Mandatory |
| 366 | Cast Iron Manhole Covers and Frames IS 1726 |
IS 1726 |
Mandatory |
| 367 | Cast Iron Pressure Pipes for Water, Gas and Sewage |
IS 1537 |
Mandatory |
| 368 | Grey Iron Castings |
IS 210 |
Mandatory |
| 369 | Pre-Laminated Particle Boards |
IS 12823 |
Mandatory |
| 370 | Medium Density Fibre Boards for General Purposes |
IS 12406 |
Mandatory |
| 371 | Veneered Particle Boards |
IS 3097 |
Mandatory |
| 372 | Particle Boards for General Purposes |
IS 3087 |
Mandatory |
| 373 | Block Boards |
IS 1659 |
Mandatory |
| 374 | Wheeled Fire Extinguishers |
IS 16018 |
Mandatory |
| 375 | Portable Fire Extinguishers |
IS 15683 |
Mandatory |
| 376 | Domestic Gas Stove for Use with PNG |
IS 17153 |
Mandatory |
| 377 | Stainless Steel Utensils |
IS 14756 |
Mandatory |
| 378 | Aluminium Cans for Beverages |
IS 14407 |
Mandatory |
| 379 | Stainless Steel Sinks |
IS 13983 |
Mandatory |
| 380 | Round Open Top Tinplate Sanitary Cans for Foods and Drinks |
IS 9396 Part-1 |
Mandatory |
| 381 | Wrought Aluminium Utensils |
IS 1660 |
Mandatory |
| 382 | Flush Bolts |
IS 5187 |
Mandatory |
| 383 | Non-Ferrous Sliding Door Bolts (ALDROPS) |
IS 2681 |
Mandatory |
| 384 | Hexagon Head Screw Grade A and B |
IS 1364 PART-2 |
Mandatory |
| 385 | Hexagon Nuts |
IS 1363 Part-3 |
Mandatory |
| 386 | Hexagon Head Screw |
IS 1363 PART-2 |
Mandatory |
| 387 | Stainless Steel Sliding Door Bolts (ALDROPS) |
IS 15834 |
Mandatory |
| 388 | Stainless Steel Tower Bolts |
IS 15833 |
Mandatory |
| 389 | Threaded Steel Fasteners-Hexagon Head Transmission Tower Bolts |
IS 12427 |
Mandatory |
| 390 | Threaded Steel Fasteners |
IS 10238 |
Mandatory |
| 391 | Sliding Locking Bolts for Use with Padlocks |
IS 7534 |
Mandatory |
| 392 | High Strength Structural Nuts |
IS 6623 |
Mandatory |
| 393 | Indicating Bolts for Use in Public Baths and Lavatories |
IS 4621 |
Mandatory |
| 394 | High Strength Structural Bolts |
IS 3757 |
Mandatory |
| 395 | Hexagon Head Bolts Grade A AND B |
IS 1364 Part-1 |
Mandatory |
| 396 | HEXAGON HEAD BOLTS IS 1363 Part-1 |
IS 1363 Part-1 |
Mandatory |
| 397 | Wrought Aluminum Alloy Bolt and Screw Stock |
IS 1284 |
Mandatory |
| 398 | Mild Steel Sliding Door Bolts for Use with Padlocks |
IS 281 |
Mandatory |
| 399 | Tower Bolts-Non-Ferrous Metal |
IS 204 Part 2 |
Mandatory |
| 400 | Tower Bolts-Ferrous Metals |
IS 204 Part 1 |
Mandatory |
| 401 | Resin Treated Compressed Wood Laminates Compregs for General Purpose |
IS 3513 Part 3 |
Mandatory |
| 402 | Resin Treated Compressed Wood Laminates Compregs for Chemical Purpose |
IS 3513 Part 2 |
Mandatory |
| 403 | Resin treated compressed wood laminates compregs for electrical purpose |
IS 3513 Part 1 |
Mandatory |
| 404 | Insulated Flask for Domestic Use |
IS 17790 |
Mandatory |
| 405 | Insulated Containers for Food Storage |
IS 17569 |
Mandatory |
| 406 | Domestic Stainless Steel Vacuum Flask or Bottle IS 17526 |
IS 17526 |
Mandatory |
| 407 | Potable Copper Stainless Aluminium Water Bottles |
IS 17803 |
Mandatory |
| 408 | Utility Lighters |
IS 22702 |
Mandatory |
| 409 | Lighters |
IS 9994 |
Mandatory |
| 410 | Protective Clothing for Welding |
IS 16655 |
Mandatory |
| 411 | High Visibility Warning Clothes - Specification |
IS 15809 |
Mandatory |
| 412 | Textiles - Requirements for Clothing Made of Limited Flame Spread Materials and Material Assemblies Affording Protection Against Heat and Flame |
IS 15742 |
Mandatory |
| 413 | Textiles - Protective Clothing for Industrial Workers Exposed to Heat (Excluding Firefighters’ and Welders’ Clothing) |
IS 15748 |
Mandatory |
| 414 | TEXTILES - Protective Clothing for Firefighters – Specification |
IS 16890 |
Mandatory |
| 415 | Textiles - Protective Gloves for Firefighters - Specification |
IS 16874 |
Mandatory |
| 416 | TEXTILES - Resistance to Ignition of Upholstered Composites Used for Non- Domestic Furniture |
IS 15768 |
Mandatory |
| 417 | TEXTILES - Tactical 3 Point Sling Universal - Specification |
IS 16725 |
Mandatory |
| 418 | Textiles - Water-Proof Multipurpose Rain Poncho with Convertibility as Bivouac |
IS 17286 |
Mandatory |
| 419 | TEXTILES – RESISTANCE TO IGNITION OF CURTAINS AND DRAPES |
IS 15741 |
Mandatory |
| 420 | TEXTILES - POUCH FOR AMMUNITION AND GRENADES MADE OF DISRUPTIVE PATTERN NYLON 66 - SPECIFICATION |
IS 16726 |
Mandatory |
| 421 | Geosynthetics-Geocells Load Bearing Application |
IS 17483 (Part-1) |
Mandatory |
| 422 | Geosynthetics Reinforced Hdpe Membrane for Effluents and Chemical Resistance Lining |
IS 17374 |
Mandatory |
| 423 | Geosynthetics Retaining Structures Geogrids Used in Reinforced Soil Retaining Structures |
IS 17373 |
Mandatory |
| 424 | Polymeric Strip or Geostrip Used as Soil Reinforcement in Retaining Structures |
IS 17372 |
Mandatory |
| 425 | Geogrids for Flexible Pavements |
IS 17371 |
Mandatory |
| 426 | Geotextiles for Permanent Erosion Control in Hard Armor Systems |
IS 16392 |
Mandatory |
| 427 | Geosynthetics Geotextiles (Or Cushioning) Materials-Textiles Used as Protection |
IS 16090 |
Mandatory |
| 428 | Geosynthetics - High Density Polyethylene (Hdpe) Geomembranes for Lining |
IS 16352 |
Mandatory |
| 429 | Geosynthetics - Geotextiles Used in Subgrade Stabilization in Pavement Structures |
IS 16362 |
Mandatory |
| 430 | Geotextiles Used in Subsurface Drainage Application |
IS 16393 |
Mandatory |
| 431 | Geotextiles Used in Sub-Grade Separation in Pavement Structures |
IS 16391 |
Mandatory |
| 432 | Open Weave Coir Bhoovastra |
IS 15869 |
Mandatory |
| 433 | Jute Geotextiles (Part-2) Control of Bank Erosion |
IS 14715 (Part-2) |
Mandatory |
| 434 | Jute Geotextiles Strengthening of Sub-Grade in Roads |
IS 14715 (Part-1) |
Mandatory |
| 435 | Polypropylene Multifilament Woven Geobags for Coastal and Waterways Protection |
IS 16654 |
Mandatory |
| 436 | Needle Punched Non-Woven Geobags |
IS 16653 |
Mandatory |
| 437 | Polyvinyl Chloride (PVC) Geomembranes for Lining |
IS 15909 |
Mandatory |
| 438 | Laminated High Density Polyethylene (Hdpe) Woven Geomembrane for Water Proof Lining |
IS 15351 |
Mandatory |
| 439 | Household Zig-Zag Sewing Machine Head |
IS 15449 (Part-1) |
Mandatory |
| 440 | Flux Cored (Tubular) Electrodes for Gas Shielded and Self-Shielded Metal Welding of Carbon or Carbon- Manganese Steel |
IS 15769 |
Mandatory |
| 441 | Hubless Centrifugally Cast (Spun) Iron Pipes, Fittings and Accessories – Spigot Series |
IS 15905 |
Mandatory |
| 442 | Centrifugally Cast (Spun) Iron Spigot and Socket Soil, Waste, Ventilating and Rainwater Pipes, Fittings and Accessories |
IS 3989 |
Mandatory |
| 443 | Centrifugally Cast (Spun) Iron Pressure Pipes for Water, Gas and Sewage |
IS 1536 |
Mandatory |
| 444 | Deep Freezers |
IS 7872 |
Mandatory |
| 445 | Household Refrigerating Appliances- Characteristics and Test Methods Part-1 General Requirements |
IS 17550 (Part-1) |
Mandatory |
| 446 | Tools for Pressing Part 3 Round Punches with 60 Degree Conical Head and Reduced Shank |
IS 4296 PART 3 |
Mandatory |
| 447 | Tools for Pressing-Punches with Cylindrical Head and Straight or Reduced Shank |
IS 4296 PART 2 |
Mandatory |
| 448 | Tools for Pressing Part 1 Round Punches with 60 Degrees Conical Head and Straight Shank |
IS 4296 PART 1 |
Mandatory |
| 449 | Personal Protective Equipment Occupational Footwear |
IS 15298 (Part-4) |
Mandatory |
| 450 | Personal Protective Equipment Safety Footwear |
IS 15298 (Part-3) |
Mandatory |
| 451 | Personal Protective Equipment Safety Footwear |
IS 15298 (Part-2) |
Mandatory |
| 452 | Derby Shoes |
IS 17043 |
Mandatory |
| 453 | Antiriot Shoes |
IS 17037 |
Mandatory |
| 454 | High Ankle Tactical Boots with Pu – Rubber Sole |
IS 17012 |
Mandatory |
| 455 | Sports Footwear |
IS 15844 |
Mandatory |
| 456 | Leather Safety Footwear with Direct Moulded Polyvinyl Chloride (PVC) Sole |
IS 14544 |
Mandatory |
| 457 | Leather Safety Footwear Having Direct Moulded Rubber Sole |
IS 11226 |
Mandatory |
| 458 | Safety Rubber Canvas Boots for Miners |
IS 3976 |
Mandatory |
| 459 | Canvas Boots Rubber Sole |
IS 3736 |
Mandatory |
| 460 | Canvas Shoes Rubber Sole |
IS 3735 |
Mandatory |
| 461 | Leather Safety Boots and Shoes for Heavy Metal Industries |
IS 1989 Part-2 |
Mandatory |
| 462 | Leather Safety Boots and Shoes for Miners |
IS 1989 Part-1 |
Mandatory |
| 463 | Footwear for Men and Women for Municipal Scavenging Work |
IS 16994 |
Mandatory |
| 464 | Moulded Plastics Footwear (Industrial Pu Boots) |
IS 16645 |
Mandatory |
| 465 | Unlined Moulded Rubber Boots |
IS 13995 |
Mandatory |
| 466 | Polyurethane Sole, SEMIRIGID |
IS 13893 |
Mandatory |
| 467 | Polyvinyl Chloride (PVC) Industrial Boots |
IS 12254 |
Mandatory |
| 468 | Slippers, Rubber |
IS 11544 |
Mandatory |
| 469 | Rubber Hawai Chappal |
IS 10702 |
Mandatory |
| 470 | PVC Sandal |
IS 6721 |
Mandatory |
| 471 | SOLID PVC SOLES AND HEELS |
IS 6719 |
Mandatory |
| 472 | Rubber Microcellular Sheets for Soles and Heels |
IS 6664 |
Mandatory |
| 473 | Moulded Solid Rubber Soles and Heels |
IS 5676 |
Mandatory |
| 474 | All Rubber Gum Boots and Ankle Boot |
IS 5557 PART 2 |
Mandatory |
| 475 | Industrial and Protective Rubber Knee and Ankle Boots |
IS 5557 |
Mandatory |
| 476 | Wheel Rims for Trucks & Buses (TRUCKS & BUSES WHEEL RIMS) |
IS 9438 |
Mandatory |
| 477 | Wheels of Passenger Cars, Quadricycles and Mini Goods Carriers |
IS 9436 |
Mandatory |
| 478 | Wheel Rims for Two and Three Wheeled Vehicles Spoke Wheel Rims |
IS 16192 PART 3 |
Mandatory |
| 479 | Sheet Metal Wheel Rims for Two Wheeler or Three Wheeler Vehicles |
IS 16192 PART 2 |
Mandatory |
| 480 | Light Alloy Wheel Rims for Two Wheeler or Three Wheeler Vehicles |
IS 16192 PART 1 |
Mandatory |
| 481 | Cattle Feeds |
IS 2052 |
Mandatory |
| 482 | Plain Copier Paper |
IS 14490 |
Mandatory |
| 483 | Retro-Reflective Devices |
IS 6742 |
Mandatory |
| 484 | Butterfly Valves for General Purpose |
IS 13095 |
Mandatory |
| 485 | Hdpe/ PP Woven Sacks for Sand |
IS 14252 |
Mandatory |
| 486 | HDPE/ PP woven sacks for packaging sugar (50kg / 25kg) |
IS 14968 |
Mandatory |
| 487 | HDPE/ PP Woven Sacks for Packaging Food Grains (10KG / 15KG / 20KG / 25KG / 30KG) |
IS 16208 |
Mandatory |
| 488 | HDPE/PP Woven Sacks for Packaging Food Grains (50KG) |
IS 14887 |
Mandatory |
| 489 | Safety Glass for Road Transport |
IS 2553 PART 2 |
Mandatory |
| 490 | Safety Glass for Architectural, Building and General Uses |
IS 2553 PART 1 |
Mandatory |
| 491 | Flat Transparent Sheet Glass |
IS 2835 |
Mandatory |
| 492 | Sulphate Resisting Portland Cement |
IS 12330 |
Mandatory |
| 493 | Non Electric Toys and Electric Toys |
IS 9873 PART1 (2,3,4,7,9) & IS 15644 |
Mandatory |
| 494 | Aluminium and Aluminium Alloy Bare Foil for Food Packaging |
IS 15392 |
Mandatory |
| 495 | Rubber Hose for Liquefied Petroleum Gas (Lpg)- Specification Part 2- Domestic and Commercial Application |
IS 9573 PART 2 |
Mandatory |
| 496 | Rubber Hose for Liquefied Petroleum Gas LPG |
IS 9573 Part-1 |
Mandatory |
| 497 | Halogen Free Flame Retardant (HFFR) Cables for Working Voltages Up to and Including 1100 V |
IS 17048 |
Mandatory |
| 498 | Shot Firing Cables (For Use Other Than in Shafts) |
IS 5950 |
Mandatory |
| 499 | Flexible Cables for Miner’s Cap-Lamps |
IS 2593 |
Mandatory |
| 500 | Elastomer Insulated Flexible Cables for Use in Mines |
IS 14494 |
Mandatory |
| 501 | Welding Cables |
IS 9857 |
Mandatory |
| 502 | Thermocouple Compensating Cables |
IS 8784 |
Mandatory |
| 503 | Elastomer Insulated Cables (3.3-33KV) |
IS 9968 PART 2 |
Mandatory |
| 504 | Aerial Bunched Cables (Upto 1100v) |
IS 14255 |
Mandatory |
| 505 | Cross-Linked Polyethylene Insulated Thermoplastics Sheathed Cables (66-220kv) |
IS 7098 PART 3 |
Mandatory |
| 506 | Crosslinked Polyethylene Insulated Thermoplastics Sheathed Cables (3.3-33kv) |
IS 7098 PART 2 |
Mandatory |
| 507 | Crosslinked Polyethylene Insulated Pvc Sheathed Cables (Upto 1100v) |
IS 7098 PART 1 |
Mandatory |
| 508 | Pvc Insulated (Heavy Duty) Electric Cables (3.3-11KV) |
IS 1554 PART 2 |
Mandatory |
| 509 | Pvc Insulated (Heavy Duty) Electric Cables (UPTO 1100V) |
IS 1554 Part 1 |
Mandatory |
| 510 | Domestic Pressure Cooker |
IS 2347 |
Mandatory |
| 511 | Transparent Float Glass |
IS 14900 |
Mandatory |
| 512 | Domestic Gas Stoves for Use with Liquefied Petroleum Gases |
IS 4246 |
Mandatory |
| 513 | Plugs and Socket-Outlets (Up to and Including 250v & 16 Amperes) |
IS 1293 |
Mandatory |
| 514 | Reverse Osmosis (Ro) Based Point-Of-Use (Pou) Water Treatment System |
IS 12640 |
Mandatory |
| 515 | Jute Bags for Packing Up to 30 Kg Food grains |
IS 16372 |
Mandatory |
| 516 | Light Weight Jute Sacking Bags for Packing 50 Kg Foodgrains |
IS 16186 |
Mandatory |
| 517 | Jute Bags for Packing 50 Kg Sugar |
IS 15138 |
Mandatory |
| 518 | Jute Bags for Packing 50 Kg Foodgrains |
IS 12650 |
Mandatory |
| 519 | B-Twill Jute Bags for Packing Foodgrains |
IS 2566 |
Mandatory |
| 520 | Twill Jute Bag |
IS 1943 |
Mandatory |
| 521 | AC Direct Connected Static Prepayment Meters for Active Energy (Class1 and Class 2) |
IS 15884 |
Mandatory |
| 522 | Malleable Iron Shots and Grits for Use in Foundries |
IS 9139 |
Mandatory |
| 523 | Steel Tubes Used for Water Wells |
IS 4270 |
Mandatory |
| 524 | Steel Tubes, Tubulars and Other Wrought Fittings (Steel Tubes) |
IS 1239 Part 1 |
Mandatory |
| 525 | Steel Tubes for Structural Purposes |
IS 1161 |
Mandatory |
| 526 | Ductile Iron Fittings for Pressure Pipes for Water, Gas and Sewage |
IS 9523 |
Mandatory |
| 527 | Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewage |
IS 8329 |
Mandatory |
| 528 | Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel, Sheet and Strips |
IS 17404 |
Mandatory |
| 529 | Stress-Relieved Low Relaxation Steel |
IS 16644 |
Mandatory |
| 530 | Stock for Forgings Produced from Continuously Cast Blooms, Billets and Slabs |
IS 13352 |
Mandatory |
| 531 | Thermostat Metal Sheet and Strip |
IS 5478 |
Mandatory |
| 532 | Flame and Induction Hardening Steels |
IS 3930 |
Mandatory |
| 533 | Cold-Reduced Tinmill Products - Blackplate |
IS 11951 |
Mandatory |
| 534 | Carbon and Low Alloy Steel Billets, Blooms, Slabs and Bars for Manufacture of Shell Bodies and Proof Shots Used in Defence Services |
IS 14986 |
Mandatory |
| 535 | Finned Type Heat Exchanger for Room Air Conditioner |
IS 11329 |
Mandatory |
| 536 | Tool Steel Forgings for Metal Forming |
IS 13387 |
Mandatory |
| 537 | Quenched and Tempered Alloy Steel Forgings for Pressure Vessels |
IS 12145 |
Mandatory |
| 538 | Ducted and Package Air Conditioners |
IS 8148 |
Mandatory |
| 539 | Forged / Rolled Ctc Segments |
IS 8748 |
Mandatory |
| 540 | Steels for Die Blocks for Drop Forging |
IS 5518 |
Mandatory |
| 541 | Room Air Conditioners- Specification Part 2 Split Air Conditioners |
IS 1391 Part 2 |
Mandatory |
| 542 | Case Hardening Steels |
IS 4432 |
Mandatory |
| 543 | Room Air Conditioners (UNITARY AIR CONDITIONERS) |
IS 1391 Part 1 |
Mandatory |
| 544 | Carbon and Carbon Manganese Free Cutting Steels |
IS 4431 |
Mandatory |
| 545 | Instantaneous Domestic Water Heater for Use with Liquefied Petroleum Gas |
IS 1555 |
Mandatory |
| 546 | Mould Steels |
IS 4430 |
Mandatory |
| 547 | Structural Steel |
IS 15911 |
Mandatory |
| 548 | Hot-Dip Terne Coated Carbon Steel Sheets |
IS 12313 |
Mandatory |
| 549 | Hand-Held Blender |
IS 302 PART 2 SECTION 14 |
Mandatory |
| 550 | Trapezoidal Steel Wires for Spring Washers |
IS 12262 |
Mandatory |
| 551 | Hydrogenated Rice Bran Fatty Acids |
IS 12361 |
Mandatory |
| 552 | Mild Steel Wire for Cottor Pins |
IS 10794 |
Mandatory |
| 553 | RUBBERSEED Fatty Acids |
IS 12124 |
Mandatory |
| 554 | Coconut Fatty Acids |
IS 12069 |
Mandatory |
| 555 | Cold-Reduced and Hot-Rolled Carbon Steel Sheet for Porcelain Enamelling |
IS 9485 |
Mandatory |
| 556 | Rice Bran Fatty Acids |
IS 12068 |
Mandatory |
| 557 | Palm Fatty Acids |
IS 12067 |
Mandatory |
| 558 | Hot Rolled Steel Plates, Sheets and Strips for Manufacture of Agricultural Tillage Discs |
IS 9442 |
Mandatory |
| 559 | Acid Oil |
IS 12029 |
Mandatory |
| 560 | Steel Plates for Galvanizing Pots |
IS 8917 |
Mandatory |
| 561 | Lauric Acid |
IS 10931 |
Mandatory |
| 562 | Steel Wire for Reeds |
IS 8566 |
Mandatory |
| 563 | Heald Wire |
IS 8565 |
Mandatory |
| 564 | 1,3 Phenylenediamine |
IS 17450 |
Mandatory |
| 565 | Vinyl Chloride Monomer |
IS 17442 |
Mandatory |
| 566 | Steel Wire for Nipples for Spokes |
IS 8564 |
Mandatory |
| 567 | Polyurethanes |
IS 17397 PART-1 |
Mandatory |
| 568 | Half Round Mild Steel Wire for the Manufacture of Split Pins |
IS 8563 |
Mandatory |
| 569 | Polycarbonate Moulding and Extrusion Materials |
IS 14434 |
Mandatory |
| 570 | Tinned Steel Wire for Banding of Armatures and Rotors |
IS 8510 PART 3 |
Mandatory |
| 571 | Tinned Steel Wire for Banding of Armatures and Rotors |
IS 8510 PART 2 |
Mandatory |
| 572 | P-Xylene |
IS 17370 |
Mandatory |
| 573 | Steel for Spring Washers |
IS 4072 |
Mandatory |
| 574 | Ethylene Dichloride |
IS 869 |
Mandatory |
| 575 | Mild Steel Rivet Bars for Shipbuilding |
IS 3298 |
Mandatory |
| 576 | Acrylonitrile Butadiene Styrene (ABS) |
IS 17077 |
Mandatory |
| 577 | Red Phosphorus |
IS 2012 |
Mandatory |
| 578 | Hard Drawn Steel Wire for Upholstery Springs |
IS 2589 |
Mandatory |
| 579 | Steel Billets, Bars and Sections for Boilers |
IS 2100 |
Mandatory |
| 580 | Methylene Chloride (Dichloromethane) |
IS 4566 |
Mandatory |
| 581 | Expanded Metal Steel Sheets for General Purposes |
IS 412 |
Mandatory |
| 582 | 3(n, N-Diethyl) Aminophenol |
IS 7686 |
Mandatory |
| 583 | Cold-Reduced Tinmill Products |
IS 12591 |
Mandatory |
| 584 | Cold-Reduced Tinmill Products - Electrolytic Tin Plate |
IS 1993 |
Mandatory |
| 585 | Steel Wire for Mechanical Springs (Stainless Steel Wire) |
IS 4454 Part 4 |
Mandatory |
| 586 | Chrome Molybdenum Steel Bars and Rods for Aircraft Purposes |
IS 963 |
Mandatory |
| 587 | Soft Magnetic Iron Rods, Bars, Flats and Sections |
IS 11947 |
Mandatory |
| 588 | Soft Magnetic Iron Strips |
IS 11946 |
Mandatory |
| 589 | Carburizing Steel for Use in Bearing Industry |
IS 5489 |
Mandatory |
| 590 | Hard-Drawn Wire Fabric for Concrete |
IS 1566 |
Mandatory |
| 591 | Ethylene Vinyl Acetate (Eva) Copolymers |
IS 13601 |
Mandatory |
| 592 | 18% Nickel Maraging Steel Bars and Rods |
IS 14652 |
Mandatory |
| 593 | Alloys Used in Electrical Resistance Metallic Heating Elements |
IS 12045 |
Mandatory |
| 594 | Steels for Piston Pins (Gudgeon Pins) |
IS 11952 |
Mandatory |
| 595 | Heat Resistance Steels |
IS 9516 |
Mandatory |
| 596 | Steels for Pneumatic Tools |
IS 5651 |
Mandatory |
| 597 | Steel for Cold Heading/cold Extrusion Applications |
IS 11169 PART 2 |
Mandatory |
| 598 | Non Magnetic Stainless Steels for Electrical Applications |
IS 10632 PART 3 |
Mandatory |
| 599 | Non Magnetic Stainless Steels for Electrical Applications |
IS 10632 PART 2 |
Mandatory |
| 600 | Stainless Steel for Welding Electrode Core |
IS 10631 |
Mandatory |
| 601 | Cold–rolled stainless steel strips for razor blades |
IS 9294 |
Mandatory |
| 602 | Linear Alkyl Benzene |
IS 12795 |
Mandatory |
| 603 | Synthetic Micro-Fibres for Use in Cement Based Matrix |
IS 16481 |
Mandatory |
| 604 | Styrene-Butadiene Rubber Latex |
IS 11356 |
Mandatory |
| 605 | Stainless Steel Blooms, Billets and Slabs for Forgings |
IS 6529 |
Mandatory |
| 606 | Polyethylene Material for Moulding and Extrusion – LDPE, LLDPE, HDPE polyethylene Material for Moulding and Extrusion – LDPE, LLDPE, HDPE |
IS 7328 |
Mandatory |
| 607 | High Tensile Steel Bars Used in Prestressed Concrete |
IS 2090 |
Mandatory |
| 608 | Polyester Staple Fibres (PSF) |
IS 17263 |
Mandatory |
| 609 | Low Carbon Steel Wire for Rivets for Use in Bearing Industry |
IS 4882 |
Mandatory |
| 610 | Polyester Partially Oriented Yarn (POY) |
IS 17262 |
Mandatory |
| 611 | Carbon Steel Cast Billet Ingots Billets, Blooms and Slabs for Re-Rolling Purposes |
IS 14650 |
Mandatory |
| 612 | Polyester Industrial Yarn (IDY) |
IS 17264 |
Mandatory |
| 613 | Polyester Continuous Filament Fully Drawn Yarn (FDY) |
IS 17261 |
Mandatory |
| 614 | Low Carbon High Strenth Cold Rolled Steel Sheets and Coilsfor Cold Forming |
IS 14491 |
Mandatory |
| 615 | 100 Percent Polyester Spun Grey and White Yarn (PSY) |
IS 17625 |
Mandatory |
| 616 | Steel for High Temperature Bolting Application |
IS 14331 |
Mandatory |
| 617 | Acrylonitrile |
IS 12540 |
Mandatory |
| 618 | Maleic Anhydride, Technical |
IS 5149 |
Mandatory |
| 619 | Styrene (Vinyl Benzene) |
IS 4105 |
Mandatory |
| 620 | Vinyl Acetate Monomer |
IS 12345 |
Mandatory |
| 621 | Ethyl Acrylate |
IS 14708 |
Mandatory |
| 622 | Methyl Acrylate |
IS 14707 |
Mandatory |
| 623 | Terephthalic Acid |
IS 15030 |
Mandatory |
| 624 | Toluene |
IS 537 |
Mandatory |
| 625 | Ethylene Glycol |
IS 5295 |
Mandatory |
| 626 | Ether |
IS 336 |
Mandatory |
| 627 | N- Butyl Acrylate |
IS 14709 |
Mandatory |
| 628 | Sodium Tripolyphosphate (Stpp), Anhydrous, Technical |
IS 6100 |
Mandatory |
| 629 | Sodium Formaldehyde Sulphoxylate |
IS 4505 |
Mandatory |
| 630 | Precipitated Barium for Ceramic & Glass Industry |
IS 12928 |
Mandatory |
| 631 | Precipitated Barium Carbonate, Technical |
IS 3205 |
Mandatory |
| 632 | Stabilized Hydrogen Peroxide |
IS 2080 |
Mandatory |
| 633 | Phosphorous Oxychloride Technical |
IS 11657 |
Mandatory |
| 634 | Phosphorous Pentachloride, Technical |
IS 11744 |
Mandatory |
| 635 | Phosphorous Trichloride, Pure and Analytical Reagentphosphorous Trichloride, Pure and Analytical Reagent |
IS 4581 |
Mandatory |
| 636 | Acetone |
IS 170 |
Mandatory |
| 637 | Potassium Carbonate, Anhydrous |
IS 7129 |
Mandatory |
| 638 | Sodium Sulphide, Technical |
IS 297 |
Mandatory |
| 639 | Morpholine |
IS 12084 |
Mandatory |
| 640 | Beta Picoline |
IS 16112 |
Mandatory |
| 641 | Gamma Picoline |
IS 16113 |
Mandatory |
| 642 | Pyridine |
IS 8058 |
Mandatory |
| 643 | Phthalic Anhydride, Technical |
IS 5158 |
Mandatory |
| 644 | Methanol (Methyl Alcohol) |
IS 517 |
Mandatory |
| 645 | Aniline |
IS 2833 |
Mandatory |
| 646 | Acetic Acid |
IS 695 |
Mandatory |
| 647 | Poly Aluminium Chloride |
IS 15573 |
Mandatory |
| 648 | Boric Acid – Specification |
IS 10116 |
Mandatory |
| 649 | Caustic Soda- Specification |
IS 252 |
Mandatory |
| 650 | Shunt Power Capacitors of the Non-Self-Healing Type for AC System |
IS 13585 (PART 1) |
Mandatory |
| 651 | Power Capacitors of Self-Healing Type for Ac Power Systems Having Rated Voltage Up To 1000V |
IS 13340 PART 1 |
Mandatory |
| 652 | A.C. Motor Capacitors |
IS 2993 |
Mandatory |
| 653 | Line Operated Three Phase A.C. Motors (Ie Code) “Efficiency Classes and Performance Specification |
IS 12625 |
Mandatory |
| 654 | Outdoor Type Oil Immersed Distribution Transformers (2500KVA, 33KV) |
IS 1180 (Part 1) |
Mandatory |
| 655 | Cold Rolled Carbon Steel /Coils for Manufacture of Welded Tubes |
IS 12367 |
Mandatory |
| 656 | Steel Wire for Needles |
IS 9962 |
Mandatory |
| 657 | Cold Rolled Steel Strips for Carbon Steel Razor Blades |
IS 9476 |
Mandatory |
| 658 | Steel Cast Billet Ingots, Billets, and Blooms for Production of High Carbon Steel Wire Rods |
IS 8951 |
Mandatory |
| 659 | Steel Ingots Billets and Blooms for the Production of Springs Rivets and Screws for General Engineering Application |
IS 8052 |
Mandatory |
| 660 | Steel Wire : Uartto 20 Mm for the Manufacture of Cold Forged Rivets |
IS 7557 |
Mandatory |
| 661 | Steel for Electrically Welded Round Link Chains |
IS 6967 |
Mandatory |
| 662 | Steel Wire for Spokes |
IS 6902 |
Mandatory |
| 663 | Carbon-Chromium for the Manufacturer of Balls, Rollers and Bearing Races |
IS 4398 |
Mandatory |
| 664 | Cold Rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainer |
IS 4397 |
Mandatory |
| 665 | Steel Wire for Staples, Pins and Clips |
IS 4224 |
Mandatory |
| 666 | Steel Wire for Umberlla Ribs |
IS 4223 |
Mandatory |
| 667 | Steel for the Manufacturer of Laminated Springs |
IS 3885 PART 2 |
Mandatory |
| 668 | Steel for the Manufacturer of Laminated Springs |
IS 3885 PART 1 |
Mandatory |
| 669 | Steel for the Manufacture of Volute, Helical and Laminated Springs for Automotive Suspension |
IS 3431 |
Mandatory |
| 670 | Steel for the Manufacture of Volute and Helical Springs (For Railway Rolling Stock) |
IS 3195 |
Mandatory |
| 671 | Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process) |
IS 2255 |
Mandatory |
| 672 | Cold – Rolled Steel Strips for Springs |
IS 2507 |
Mandatory |
| 673 | Carbon Steel Wire for the Manufacture of Wood Screws |
IS 1812 |
Mandatory |
| 674 | Mild Steel Wire, Cold Heading Quality |
IS 1673 |
Mandatory |
| 675 | Steel Rivet Bars (Medium and High Tensile) – for Structural Purposes |
IS 1148 |
Mandatory |
| 676 | Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Re-Rolling into Structural Steel (Ordinary Quality) |
IS 2831 |
Mandatory |
| 677 | Magnetic Materials |
IS 16585 |
Mandatory |
| 678 | Carbon Manganese Steel Forgings for Pressure Vessels |
IS 12146 |
Mandatory |
| 679 | Steel for Valves for Internal Combustion Engines |
IS 7494 |
Mandatory |
| 680 | High Speed Tool Steels |
IS 7291 |
Mandatory |
| 681 | Steel for Hardening and Tempering |
IS 5517 |
Mandatory |
| 682 | Tool and Die Steels |
IS 3748 |
Mandatory |
| 683 | Bright Steel Bars IS 9550 |
IS 9550 |
Mandatory |
| 684 | Structural Steel for Construction of Hulls of Ships |
IS 3039 |
Mandatory |
| 685 | Hot-Rolled Mild Steel Sheet and Strip in Coil Form for Cold-Reduced Tinplate and Cold-Reduced Black Plate |
IS 2835 |
Mandatory |
| 686 | Hot Rolled Steel Strip (Bailing) |
IS 1029 |
Mandatory |
| 687 | Ferronickel |
IS 4409 |
Mandatory |
| 688 | Ferrosilicon |
IS 1110 |
Mandatory |
| 689 | Low Nickel Austenitic Stainless Steel Sheet and Strip for Utensils and Kitchen Applications- Specification |
IS 15997 |
Mandatory |
| 690 | Stainless Steel Plate, Sheet and Strip |
IS 6911 |
Mandatory |
| 691 | Stainless Steel Sheets and Strips for Utensils- Specification |
IS 5522 |
Mandatory |
| 692 | Stainless Steel Bars and Flats |
IS 6603 |
Mandatory |
| 693 | Stainless Steel Wires |
IS 6528 |
Mandatory |
| 694 | Stainless Steel Wire Rod |
IS 6527 |
Mandatory |
| 695 | Structural Steel for Building for Structures with Improved Seismic Resistance |
IS 15962 |
Mandatory |
| 696 | Hot Dip Aluminium- Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain) |
IS 15961 |
Mandatory |
| 697 | High Tensile Strength Flat Rolled Steel Plate (Up to 6 Mm) Sheet and Strip for the Manufacture of Welded Gas Cylinder |
IS 15914 |
Mandatory |
| 698 | Fire Resistant Steel – Specification |
IS 15103 |
Mandatory |
| 699 | Structural Weather Resistant Steel |
IS 11857 |
Mandatory |
| 700 | Steels for Cold Heading/cold Extrusion Application Part-1 Wrought Carbon and Low Alloy Steels |
IS 11169 Part 1 |
Mandatory |
| 701 | Bead Wires for Tyres |
IS 4824 |
Mandatory |
| 702 | Steel Wire for Mechanical Springs Part-2 Oil Hardened and Tempered Steel Wire |
IS 4454 Part 2 |
Mandatory |
| 703 | Steel Wire for Mechanical Springs Part-1 Cold Drawn Unalloyed Steel Wire |
IS 4454 Part 1 |
Mandatory |
| 704 | Alloy Steel Billets, Blooms and Slabs for Forging for General Engineering Purposes |
IS 4368 |
Mandatory |
| 705 | Low Carbon Galvanized Steel Wires Formed Wires and Tapes for Armouring of Cables |
IS 3975 |
Mandatory |
| 706 | Round Steel Wire for Ropes |
IS 1835 |
Mandatory |
| 707 | Mild Steel Wire for General Engineering Purposes |
IS 280 |
Mandatory |
| 708 | Pre-Painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain) |
IS 15965 |
Mandatory |
| 709 | Pre-Painted Galvanized Steel Sheets and Coils |
IS 14246 |
Mandatory |
| 710 | High Carbon Steel Wire Rods- Specification |
IS 7904 |
Mandatory |
| 711 | Hot Rolled Steel Narrow Width Strip for Welded Tubes and Pipes |
IS 15647 |
Mandatory |
| 712 | Hot Rolled Carbon Steel Strip for Cold Rolling Purposes |
IS 11513 |
Mandatory |
| 713 | Hot Rolled Steel Strip for Welded Tubes and Pipes |
IS 10748 |
Mandatory |
| 714 | Mild Steel Wire Rods for General Engineering Purposes |
IS 7887 |
Mandatory |
| 715 | Hot Rolled Bars for Production of Bright Bars and Machined Parts for Engineering Applications |
IS 7283 |
Mandatory |
| 716 | Hot Rolled Steel Plate (Up to 6 Mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders |
IS 6240 |
Mandatory |
| 717 | Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging Purposes — Specification |
IS 5986 |
Mandatory |
| 718 | Cold Rolled Steel Strips (Box Strappings) |
IS 5872 |
Mandatory |
| 719 | Steel Chequered Plates |
IS 3502 |
Mandatory |
| 720 | Mild Steel for Metal Arc Welding Electrodes |
IS 2879 |
Mandatory |
| 721 | Carbon Steel Billets, Blooms, Slabs and Bars for Forgings |
IS 1875 |
Mandatory |
| 722 | Hot Rolled Carbon Steel Sheet, Plate and Strip |
IS 1079 |
Mandatory |
| 723 | Cold Reduced Carbon Steel Sheets and Strips |
IS 513 (PART 2) |
Mandatory |
| 724 | Cold Reduced Carbon Steel Sheets and Strips Part 1 Cold Forming and Drawing Purpose |
IS 513 Part 1 |
Mandatory |
| 725 | Mild Steel and Medium Tensile Steel Bars and Hand Drawn Steel Wire for Concrete Reinforcement |
IS 432 (PART 2) |
Mandatory |
| 726 | Medium Tensile Steel Bars |
IS 432 Part 1 |
Mandatory |
| 727 | Hot Rolled Medium and High Tensile Structural Steel |
IS 2062 |
Mandatory |
| 728 | Oriented Electrical Steel Sheet and Strip- Semi-Processed Type- Specification |
IS 15931 |
Mandatory |
| 729 | Grain Oriented Electrical Steel Sheet & Strip (Crgo) |
IS 3024 |
Mandatory |
| 730 | Cold Rolled Non-Oriented Electrical Steel Sheets and Strip-Fully Processed Type (CRNO) |
IS 648 |
Mandatory |
| 731 | Deformed Steel Bars and Wires for Concrete Reinforcement |
IS 1786 |
Mandatory |
| 732 | Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Rerolling |
IS 2830 |
Mandatory |
| 733 | Steel Plates for Pressure Vessels Used at Moderate and Low Temperature |
IS 2041 |
Mandatory |
| 734 | Steel Plates for Pressure Vessels for Intermediate and High Temperature Service Including Boilers |
IS 2002 |
Mandatory |
| 735 | Galvanized Steel Strips and Sheets (Plain and Corrugated) |
IS 277 |
Mandatory |
| 736 | Uncoated Stress Relieved Low Relaxation Seven-Ply Strand for Pre-Stressed Concrete |
IS 14268 |
Mandatory |
| 737 | Fusion Bonded Epoxy Coated Reinforcing Bars |
IS 13620 |
Mandatory |
| 738 | Uncoated Stress Relieved Strand for Pre-Stressed Concrete |
IS 6006 |
Mandatory |
| 739 | Indented Wire for Pre-Stressed Concrete |
IS 6003 |
Mandatory |
| 740 | Plain Hard-Drawn Steel Wire for Pre-Stressed Concrete Part 2: As Drawn Wire |
IS 1785 PART 2 |
Mandatory |
| 741 | Cold Drawn Stress-Relieved Wire |
IS 1785 PART 1 |
Mandatory |
| 742 | Diagnostic Medical X-Ray Equipment |
IS 7620 PART 1 |
Mandatory |
| 743 | Clinical Thermometers :Part 2 Enclosed Scale Type |
IS 3055 PART 2 |
Mandatory |
| 744 | Clinical Thermometers :Part 1 Solid Stem Type |
IS 3055 PART 1 |
Mandatory |
| 745 | Low pressure Regulators |
IS 9798 |
Mandatory |
| 746 | Valve Fittings for Use with Liquified Petroleum Gas |
IS 8776 |
Mandatory |
| 747 | Valve Fittings for Use with Liquefied Petroleum Gas Cylinders |
IS 8737 |
Mandatory |
| 748 | Weilded and Seamless Steel Dissolved Acetylene Gas Cylinders |
IS 7312 |
Mandatory |
| 749 | Valve Fittings for Gas Cylinder |
IS 7302 |
Mandatory |
| 750 | Refillable Seamless Steel Gas Cylinders |
IS 7285 PART 2 |
Mandatory |
| 751 | Refillable Seamless steel gas cylinders |
IS 7285 Part 1 |
Mandatory |
| 752 | Welded Low Carbon Steel Cylinders for Low Pressure Liquefiable Gases |
IS 7142 |
Mandatory |
| 753 | Yoke Type Valve Connection for Small Medical Gas Cylinders |
IS 3746 |
Mandatory |
| 754 | Valve Fittings for Compressed Gas Cylinder |
IS 3224 |
Mandatory |
| 755 | Welded Low Carbon Steel Gas Cylinder |
IS 3196 PART 2 |
Mandatory |
| 756 | Welded Low Carbon Steel Gas Cylinder |
IS 3196 PART 1 |
Mandatory |
| 757 | Welded Low Carbon Steel Gas Cylinder |
IS 3196 PART 4 |
Mandatory |
| 758 | Liquefied Petroleum Gas (Lpg) Containers for Automotive Use |
IS 15100 |
Mandatory |
| 759 | Liquefied Petroleum Gas Containers for Automotive Use |
IS 14899 |
Mandatory |
| 760 | Pneumatic Tyres for Commercial Vehicles-Diagonal and Radial Ply |
IS 15636 |
Mandatory |
| 761 | Pneumatic Tyres for Passenger Car Vehicles– Diagonal and Radial Ply |
IS 15633 |
Mandatory |
| 762 | Pneumatic Tyres for Two and Three-Wheeled Motor Vehicles |
IS 15627 |
Mandatory |
| 763 | Automotive Vehicles –Tubes for Pneumatic Tyres |
IS 13098 |
Mandatory |
| 764 | Oil Pressure Stoves |
IS 1342 |
Mandatory |
| 765 | Multi-Burner Oil Pressure Stoves |
IS 2787 |
Mandatory |
| 766 | Oil Pressure Stove, Offset Burner Type |
IS 10109 |
Mandatory |
| 767 | Glass Feeding Bottles |
IS 5168 |
Mandatory |
| 768 | Plastic Feeding Bottles |
IS 14625 |
Mandatory |
| 769 | Milk-Cereal Based Complementary Foods IS 1656 |
IS 1656 |
Mandatory |
| 770 | Packaged Drinking Water IS 14543 |
IS 14543 |
Mandatory |
| 771 | Partly Skimmed Milk Powder |
IS 14252 |
Mandatory |
| 772 | Infant Milk Substitutes |
IS 14433 |
Mandatory |
| 773 | Packaged Natural Mineral Water |
IS 13428 |
Mandatory |
| 774 | Skimmed Milk-Powder, Extra Grade |
IS 13334 PART 2 |
Mandatory |
| 775 | Skimmed Milk-Powder |
IS 13334 PART 1 |
Mandatory |
| 776 | SWEETENED ULTRA HIGH TEMPERATURE TREATED CONDENSED MILK |
IS 12176 |
Mandatory |
| 777 | Skimmed Condensed Milk |
IS 1166 |
Mandatory |
| 778 | Whole Milk Powder |
IS 1165 |
Mandatory |
| 779 | Cereal Based Complementary Foods |
IS 11536 |
Mandatory |
| 780 | Follow Up Formula – Complimentary Foods |
IS 15757 |
Mandatory |
| 781 | Dry Batteries |
IS 8144 |
Mandatory |
| 782 | Elastomer Insulated Cables 1100 V |
IS 9968 PART 1 |
Mandatory |
| 783 | Electrical Accessories-Circuit Breakers for Overcurrent Protection |
IS 8828 |
Mandatory |
| 784 | Pvc Insulated Cable 1100V |
IS 694 |
Mandatory |
| 785 | Electric Lamps (Upto100 W) |
IS 418 |
Mandatory |
| 786 | Switches for Domestic and Similar Purposes |
IS 3854 |
Mandatory |
| 787 | Room Heaters |
IS 302 Part 2 Section 30 |
Mandatory |
| 788 | Electric Stoves |
IS 302 (Part 2/Sec 202) |
Mandatory |
| 789 | Electric Immersion Water-Heaters |
IS 302 Part 2 Sec 201 |
Mandatory |
| 790 | Electric Iron |
IS 302 (Part 2/Sec 3) |
Mandatory |
| 791 | Ballasted Lamps for General Lighting Services |
IS 15111 |
Mandatory |
| 792 | Ac Static Transformer Operated Watt-Hour and Vat-Hour Meters, CLASS 0.2S & 0.5S IS 14697:2021 |
IS 14697 |
Mandatory |
| 793 | Ac Static Watt-Hour Meters, Class 1 & 2 IS 13779:2020 |
IS 13779 |
Mandatory |
| 794 | Ac Watt-Hour Meters, Class 0.5, 1 & 2 |
IS 13010 |
Mandatory |
| 795 | Residual Current Operated Circuit-Breaker IS 12640 PART 2 |
IS 12640 PART 2 |
Mandatory |
| 796 | High Alumina Refractory Cement |
IS 15895 |
Mandatory |
| 797 | Microfine Ordinary Portland Cement |
IS 16993 |
Mandatory |
| 798 | Composite Cement |
IS 16415 |
Mandatory |
| 799 | Oil Well Cement |
IS 8229 |
Mandatory |
| 800 | Hydrophobic Portland Cement |
IS 8043 |
Mandatory |
| 801 | White Portland Cement |
IS 8041 |
Mandatory |
| 802 | Rapid Hardening Portland Cement |
IS 8041 |
Mandatory |
| 803 | Super Sulphated Cement |
IS 6909 |
Mandatory |
| 804 | High Alumina Cement for Structural Use |
IS 6452 |
Mandatory |
| 805 | Portland Slag Cement |
IS 455 |
Mandatory |
| 806 | Masonry Cement |
IS 3466 |
Mandatory |
| 807 | Ordinary Portland Cement |
IS 269 |
Mandatory |
| 808 | Portland Pozzolana Cement-Part 2 Calcined Clay Based |
IS 1489 PART 2 |
Mandatory |
| 809 | Portland Pozzolana Cement Fly-Ash Based |
IS 1489 PART 1 |
Mandatory |
| 810 | Low Heat Portland Cement |
IS 12600 |
Mandatory |