Mandatory
BIS Certification for
Hydraulically Regulated Door Closers IS 3564
IS 3564
BIS CERTIFICATION FOR HYDRAULICALLY REGULATED DOOR CLOSERS IS 3564
Introduction to Indian Standard IS 3564 cover Hydraulically regulated door closers. This standard specifies the manufacturing, chemical and physical requirements and testing of Hydraulically regulated door closers. Raw material shall confirm table 2 and Clause 7 of IS 3564.
Specification of Hydraulically Regulated Door Closers IS 3564
IS 3564 specifies the quality parameters or characteristics of the Hydraulically regulated door closers as follows
(i) Nominal Size
(ii) Device for adjusting the speed and closing time
(iii) Thickness of anodic coating
(iv) Phosphating treatment
(v) Visual Inspection
(vi) Surface
(vii) Endurance test
Mandate for ISI Mark Certification of Hydraulically regulated door closers (IS 3564) :
- Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Commerce and Industry after consulting the Bureau of Indian Standards has issued the Quality control order.
- As per the Quality control order, all the manufacturers of Hydraulically regulated door closers are obligated to obtain ISI Mark Certification.
Types of Hydraulically regulated door closers covered under IS 3564
|
“Licence is granted to use Standard Mark on Hydraulically regulated door closers as per IS 3564:1995” |
|
|
Types / Scope of license |
Type – Bottle Type (Type A) / Tubular Type (Type B) Designation of Closers – 1/2/3 Suitability based on direction of opening of door - Right closers (R)/ Left closers (L)/ Universal closers (U) |
Procedure to obtain BIS Certification of Hydraulically Regulated Door Closers
Check: BIS Mark Certification Process for Indian Manufacturers
Check: BIS Mark Certification Process for Foreign Manufacturers
Requirements to get the BIS license for Hydraulically regulated door closers
Conformity of Raw Material as per IS 3564
In-house testing laboratory for mandatory tests
Competent Quality Control Personnel
Adherence to the BIS guidelines for Hydraulically regulated door closers as per Indian standard IS 3564
There are 3 major categories of document required to get the BIS license:
a. Administrative Details
b. Technical Details
c. Quality Control Personnel Details
d. Commercial Details
ISI Certification Fee for IS 3564
Expenses involved in obtaining a BIS certificate for Hydraulically regulated door closers, the Product Certification (Scheme-I) of BIS :
|
S No. |
Particular |
Amount (INR) |
Remarks |
|
1. |
Application Fee |
1000 |
To be paid directly to BIS |
|
2. |
Audit Fee |
7000 |
To be paid directly to BIS |
|
3. |
License Fee |
1000 |
To be paid directly to BIS |
|
4. |
Sample Testing Fee |
As Applicable |
To be paid directly to BIS (Testing charges vary from product to product and lab to lab.) |
|
5. |
Minimum Advance Marking Fee |
As per actual |
To be paid directly to BIS (Marking fee varies as per Indian Standard) |
|
6. |
Renewal Fee |
1000 |
To be paid directly to BIS |
|
7. |
Inclusion Fee |
5000 |
To be paid directly to BIS |
|
8. |
ERCS Pvt Ltd Service Fee |
Please contact info@elitasrcs.com |
|
|
Remarks |
Including all the taxes |
||
- In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
- For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
- Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.
Role of ERCS Private Limited in getting your product certified :
To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.
ERCS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.
Scope of work by ECRS Private Limited:
a. Ensuring the conformity of your product as per IS 3564:
ERCS Pvt. Ltd. has developed a vast network within the Door Fitting Industry, various BIS departments to assist in ensuring conformity of the product, Hydraulically regulated door closers according to IS 3564.
b. Effective documentation with awareness of the BIS guidelines:
In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 450 projects and technically competent associates in various Industries. We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.
c. A pre-visit can be paid at your factory premises:
In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that the required changes can be made to remove the elements of fallibility.
d. Assistance for BIS audits:
We will explain the whole procedure of conducting a BIS inspection and make you aware of the things that need to be prepared and readily available at the time of inspection.
ISI Mark Benefits for Hydraulically Regulated Door Closers
- The term “ISI mark" means that a certain product conforms to the quality standards set by the government.
- Hydraulically regulated door closers must obtain the ISI Mark, and the violators are penalized with the material and a significant sum as a fine.
- Getting certification improves the probability of your product surviving and competing in the market.
- Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products, you can win the confidence and trust of the buyer.
- With the word of mouth of such client list, you can establish your credibility in the market.
- Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.