Mandatory
Aluminum Alloy Extruded Tubes for Irrigation Purposes IS 7092 Part 2
IS 7092 Part 2
IS 7092 Part 2 BIS certification is mandatory for all manufacturers of Aluminium Alloy Extruded Tubes for Irrigation Purposes selling in India. Under the Quality Control Order issued by the Ministry of Commerce and Industry, every manufacturer must obtain the ISI Mark as per IS 7092 Part 2:1987 before placing their product in the Indian market. This standard governs critical quality parameters, including chemical composition, dimensional tolerances, mechanical properties, and hydrostatic pressure testing, ensuring that irrigation tubes meet India's safety and performance benchmarks. Non-compliance can result in product seizure, heavy fines, and business disruption.
Specification of IS 7092 Part 2
IS 7092 Part 2 specifies the quality parameters or characteristics of the Aluminum Alloy Extruded Tubes for Irrigation Purposes as follows
(i) Chemical Composition
(ii) Dimension and Tolerances
(iii) Length
(iv) Hydrostatic Pressure test
(v) Mechanical Properties
(vi) Drift Expansion test
ISI Mark Certification of Aluminum Alloy Extruded Tubes for Irrigation Purposes
Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Commerce and Industry, Department for Promotion of Industry and Internal Trade after consulting the Bureau of Indian Standards has issued the Quality control order. As per the Quality control order, all the manufacturers of Aluminum Alloy Extruded Tubes for Irrigation Purposes are obligated to obtain ISI Mark Certification.
Types of Aluminum Alloy Extruded Tubes for Irrigation Purposes covered under IS
|
“Licence is granted to use Standard Mark on Aluminum Alloy Extruded Tubes for Irrigation Purposes as per IS 7092 Part 2:1987”. |
|
|
Types / Scope of license |
Nominal Sizes– 50mm, 63mm, 75mm, 90mm, 100mm, 125mm, 150mm, 175mm, 200mm |
BIS Certification Process for ISI Marking as per IS 7092 Part 2
To Check the Procedure in Detail, Please Visit:
Process of ISI Certification for Indian Manufacturers (BIS Certification India)
Process of ISI Certification for Foreign Manufacturers (FMCS License)
Requirements to get the BIS license
- Conformity of Raw Material as per IS 7092 Part 2
- In-house testing laboratory for mandatory tests
- Competent Quality Control Personnel
- Adherence to the BIS guidelines for Aluminum Alloy Extruded Tubes for Irrigation Purposes as per Indian standard IS 7092 Part 2
- There are 3 major categories of document required to get the BIS license:
a. Administrative Details
b. Technical Details
c. Quality Control Personnel Details
d. Commercial Details
ISI Mark Cost for Aluminum Alloy Extruded Tubes for Irrigation Purposes
Expenses involved in obtaining BIS certificate for Aluminum Alloy Extruded Tubes for Irrigation Purposes as per IS 7092 Part 2 under the Product Certification (Scheme-I) of BIS :
|
S No. |
Particular |
Amount (INR) |
Remarks |
|
1. |
Application Fee |
1000 |
To be paid directly to BIS |
|
2. |
Audit Fee |
7000 |
To be paid directly to BIS |
|
3. |
License Fee |
1000 |
To be paid directly to BIS |
|
4. |
Sample Testing Fee |
As Applicable |
To be paid directly to BIS (Testing charges vary from product to product and lab to lab.) |
|
5. |
Minimum Advance Marking Fee |
As per actual |
To be paid directly to BIS (Marking fee varies as per Indian Standard) |
|
6. |
Renewal Fee |
1000 |
To be paid directly to BIS |
|
7. |
Inclusion Fee |
5000 |
To be paid directly to BIS |
|
8. |
ERCS Pvt Ltd Service Fee |
Please contact info@elitasrcs.com |
|
|
Remarks |
Including all the taxes |
||
- In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
- For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
- Apart from the charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.
Role of ERCS Private Limited in getting your product certified :
To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards. ERCS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.
Scope of work by ERCS Private Limited:
a. Ensuring the conformity of your product as per IS 7092 Part 2:
ERCS Pvt. Ltd. has developed a vast network within the Aluminium & Aluminum Alloy Industry various BIS departments to assist for ensuring conformity of the product Aluminium Alloy Extruded Tubes for Irrigation Purposes according to according to IS 7092 Part 2.
b. Effective documentation with the awareness of the BIS guidelines:
In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries.
We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.
c. A pre-visit can be paid at your factory premises:
In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.
d. Assistance for BIS audits:
We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.
ISI/BIS Certification for Aluminum Alloy Extruded Tubes for Irrigation Purposes
Benefits of getting ISI Mark for Aluminum Alloy Extruded Tubes for Irrigation Purposes to sell in the Indian Market with our help
- The term “ISI mark" means that a certain product conforms to the quality standards set by the government.
- It is compulsory for Aluminum Alloy Extruded Tubes for Irrigation Purposes to obtain the ISI Mark, and the violators are penalised with the seizure of the material and a significant sum as a fine.
- Getting certification improves the probability of your product surviving and competing in the market.
- Customers have a tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products, you can win the confidence and trust of the buyer.
- With the word of mouth of such a client list, you can establish your credibility in the market.
- Hence, with the renowned brand, you can raise the standard and benchmark the market value of the product.