BIS Certification for Stationary Storage Type Electric Water Heaters- IS 2082

Introduction to Indian Standard IS 2082, Stationary Storage Type Electric Water Heaters as  per IS 2082 covers Stationary Storage Type Electric Water Heaters. This standard specifies the manufacturing, chemical and physical requirements and testing of Stationary Storage Type Electric Water Heaters.

 

This standard has been formulated in a way that directs manufacturers of “Stationary Storage Type Electric Water Heaters” products and specifies the standards for safety and performance requirements for Stationary Storage type Electric Water Heaters. General requirement and Particular requirements- IS 2082: 2018 - Safety of household and similar electrical appliances respectively. Also Specifies the marking requirements for the appliances, including the necessity for clear instructions regarding usage, maintenance, and safety.

 

BIS Certification Specification for IS 2082

IS 2082 specifies the safety and quality parameters or characteristics of the Electric water heater as follows:

• It ensures that consumers are not exposed to live electrical components.
• Include all materials that can withstand high temperatures and prevent electrical faults.
• To prevent from short circuit, ensure proper insulation; this specifies the necessary electrical clearance.
• To prevent electrical shocks, proper grounding is required
• Include tests and measure the leakage and electrical strength of the water heater at the operating temperature.
• All the requirements of input power, capacity, standing loss, calibration accuracy and hot water output.

 

Mandate for ISI Mark Certification of Stationary Storage type Electric Water Heaters IS 2082:

Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Commerce and Industry, Department for Promotion of Industry and Internal Trade after consulting the Bureau of Indian Standards has issued the Quality control order.

 

As per the Quality control order, all the manufacturers Stationary Storage type Electric Water Heaters are obligated to obtain ISI Mark Certification as Obtaining the ISI/BIS Certification is a mandatory requirement for manufacturers of Stationary Storage Type Electric Water Heaters to sell their products in the Indian market.

 

Types of Stationary Storage Type Electric Water Heaters covered under IS 2082   

 IS 2082 applies to Closed / Open-Outlet/ Cistern-fed/ Cistern-type/Low-pressure/ Heat Exchange.

 

BIS Certification Process for Stationary Storage Type Electric Water Heaters

Here's the BIS process for both Indian and foreign manufacturers. Click the links below to learn more in detail:

Check the BIS Certificate for Indian Manufacturers (BIS Certification in India)

Check the BIS Certificate for Foreign Manufacturers (FMCS License in India)

 

BIS Mark Certification Timeline for IS 2082

• BIS certificate For Indian Manufacturers (Standard Timeframe – 30 days)
• BIS FMCS Scheme For Foreign Manufacturers (Standard Timeframe – 180 days)

 

BIS License Requirements for Stationary Storage Type Electric Water Heaters

• Requirements to get the BIS license for Stationary Storage Type Electric Water Heaters
• Conformity requirement specifications as per IS 2082
• In-house testing laboratory for mandatory tests
• Competent Quality Control Personnel
• Adherence to the BIS guidelines for Stationary Storage Type Electric Water Heaters as per Indian standard IS 2082

There are 4 major categories of document required to get the BIS license:

a.   Administrative Details

b.   Technical Details

c.    Quality Control Personnel Details

d.   Commercial Details

 

BIS Approval Cost for IS 2082

Expenses involved in obtaining BIS certificate for Stationary Storage type Electric Water Heaters as per IS 2082 under the Product Certification (Scheme-I) of BIS:

S No.	Particular	Amount (INR)	Remarks
1.	Application Fee	1000	To be paid directly to BIS
2.	Audit Fee	7000	To be paid directly to BIS
3.	License Fee	1000	To be paid directly to BIS
4.	Sample Testing Fee	As Applicable	To be paid directly to BIS (Testing charges vary from product to product and lab to lab.)
5.	Minimum Advance Marking Fee	As per actual	To be paid directly to BIS (Marking fee varies as per Indian Standard)
6.	Renewal Fee	1000	To be paid directly to BIS
7.	Inclusion Fee	5000	To be paid directly to BIS
8.	ERCS Pvt Ltd Service Fee	Please contact info@elitasrcs.com
	Remarks	Including all the taxes

   

• In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
• For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
• Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.

 

Why Choose ERCS Pvt Ltd for Stationary Storage type Electric Water Heaters BIS certification: 

To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards. ERCS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.

 

We have expertise in both-

BIS certification services for Indian Manufacture
FMCS BIS Certification for Foreign Manufacturer

 

Scope of work by ERCS Private Limited:

a.     Ensuring the conformity of your product as per IS 2082:

ERCS Pvt. Ltd. has developed a vast network within the Electric appliances Industry various BIS departments to assist in ensuring conformity of the product Electric immersion water heater according IS 2082.

 

b.     Effective documentation with the awareness of the BIS guidelines:

To facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries.

We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do reliable and effective documentation of your product in accordance with the BIS guidelines.

 

c.      A pre-visit can be paid at your factory premises:

In the process of getting BIS certification, the officer from the BIS authority visits the factory for inspection. To get good results, the BIS inspection should go smoothly without any non-conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that the required changes can be adapted to remove the elements of fallibility.

 

d.     Assistance for BIS audits:

We will explain the whole procedure of conducting a BIS inspection and make you aware of the things that need to be prepared and readily available at the time of inspection.

 

BIS Certificate Benefits for Stationary Storage Type Electric Water Heaters

Benefits of getting ISI Mark for Stationary Storage Type Electric Water Heaters to sell in Indian Market with our help:

The term “ISI mark" means that a certain product conforms to the quality standards set up by the government.
It is compulsory for stationary storage type electric water heater manufacturers to obtain the ISI Mark and the violators are penalized with the material seized and a significant sum as fine.

 Getting certification improves the probability of your product to survive and compete in the market. Customers have the tendency to buy ISI certified products as it ensures safety and standard quality. Hence, with certified products you can win the confidence and trust of the buyer.

With the word of mouth of such a client list, you can establish your credibility in the market. Hence with renowned brands, you can raise the standard and benchmark the market value of the product.