ISI Certification (BIS) for OIL WELL CEMENT IS 8229 : 1986

Oil-well cements are used for cementing work in the drilling of oil wells where they are subject to high temperatures and pressures. They usually consist of portland or pozzolanic cement (see below) with special organic retarders to prevent the cement from setting too quickly.

Oil well Cement is used in the following areas –

· Oil Well cements are used in the form of slurries in conditions encountered in drilling bore hole for oil exploration- not used for structural concrete although it will easily meet the requirement of OPC.

· Used in Extreme conditions in the form of slurry with requirement such as:

Introduction to Indian Standard IS 8229 Oil well Cement

· IS 8229 cover Oil well Cement. This standard covers nine classes of oil-well cement used for the purpose of securing oil-well pipe casing with the surrounding earth and rocks.

· IS 8229 specifies the quality parameters or characteristics of the Oil well Cement as follows

(i) Insoluble Residue

(ii) Loss of ignition

(iii) Fineness

(iv) Setting time

(v) Soundness

(vi) Chemical Testing

(vii) Free water content of the slurry

(viii) Magnesium Oxide

For more info on the product standardization click here

Mandate for ISI Mark Certification of Oil well Cement (IS 8229) :

· Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Commerce and Industry, Department for Promotion of Industry and Internal Trade after consulting the Bureau of Indian Standards has issued the Cement (Quality control) order.

· As per the Cement (Quality control) order, all the manufacturers of Oil well Cement are obligated to obtain ISI Mark Certification.

Types of Cement covered under IS 8229

Procedure to obtain BIS Certification of Oil well Cement to use ISI mark as per IS 8229

· For Indian Manufacturers (Standard Timeframe– 30 days) click here

· For Foreign Manufacturers (Standard Timeframe– 180 days)click here

Requisites to get the BIS license for Oil well Cement

· Conformity of Raw Material as per IS 8229

· In-house testing laboratory for mandatory tests

· Competent Quality Control Personnel

· Adherence to the BIS guidelines for Oil well Cement as per Indian standard IS 8229

· There are 3 major categories of document required to get the BIS license:

a. Administrative Details

b. Technical Details

c. Quality Control Personnel Details 

d. Commercial Details

Expenses involved in obtaining BIS certificate for Oil well Cement as per IS 8229 under the Product Certification (Scheme-I) of BIS :

· In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.

· For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.

· Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.

Role of ERCS Private Limited in getting your product certified :

· To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.

· ECRS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.

· Scope of work by ECRS Private Limited:

a. Ensuring the conformity of your product as per IS 8229:

ERCS Pvt. Ltd. has developed a vast network within the Cement Industry & various BIS departments to assist for ensuring conformity of the product Oil well Cement according to according to IS 8229.

b. Effective documentation with the awareness of the BIS guidelines:

In order to facilitate the industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 100 projects and various acquaintances in the Industry.

We understand the Indian Standard Specifications & BIS guidelines which we interpret to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.

c. A pre-visit can paid at your factory premises:

In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.

d. Assistance for BIS audits:

We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.

Benefits of getting ISI Mark for Oil well Cement to sell in Indian Market with our help

§ The term “ISI mark" means, that a certain product conforms to the quality standards set up by the government.

§ It is compulsory for Oil well Cement to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.

§ Getting certification improves the probability of your product to survive and compete in the market.

§ Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.

§ With the word of mouth of such client list, you can establish your credibility in the market.

§ Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.