ISI Certification (BIS) for CARBON AND CARBON MANGANESE FREE CUTTING STEELS IS 4431:1978

BIS CERTIFICATION OF CARBON AND CARBON MANGANESE FREE CUTTING STEELS IS 4431:1978

1. Introduction to Indian Standard IS 4431; Carbon and Carbon Manganese Free Cutting Steels

• IS 4431 cover Carbon and Carbon Manganese Free Cutting Steels. This standard specifies the manufacturing, chemical and physical requirements and testing of Carbon and Carbon Manganese Free Cutting Steels.
• IS 4431 specifies the quality parameters or characteristics of the Carbon and Carbon Manganese Free Cutting Steels as follows

• Freedom from defects
• Chemical Analysis
• Tensile Strength
• Yield Strength
• Elongation
• Izod Impact Value
• Dimension and Tolerances

For more info on the product standardization click here

1. Mandate for ISI Mark Certification of Carbon and Carbon Manganese Free Cutting Steels (IS 4431) :

• Under section 14 of Bureau of Indian Standards Act, 1986, the Ministry of Steel, consulting the Bureau of Indian Standards has issued the Steel and Steel Product List (Quality control order) according to the QCO, Product can’t be sold in the Indian Market without having BIS (ISI Mark) Certificate.
• As per the Quality control order, all the manufacturers of Carbon and Carbon Manganese Free Cutting Steels are obligated to obtain ISI Mark Certification.

1. Types of Steels covered under IS 4431

1. Procedure to obtain BIS Certification of Carbon and Carbon Manganese Free Cutting Steels to use ISI mark as per IS 4431

• For Indian Manufacturers (Standard Timeframe – 30 days) click here
• For Foreign Manufacturers (Standard Timeframe – 180 days)click here

1. Requisites to get the BIS license for Carbon and Carbon Manganese Free Cutting Steels

• Conformity of Raw Material as per IS 4431
• In-house testing laboratory for mandatory tests
• Competent Quality Control Personnel
• Adherence to the BIS guidelines for Carbon and Carbon Manganese Free Cutting Steels as per Indian standard IS 4431
• There are 3 major categories of document required to get the BIS license:
  1. Administrative Details
  2. Technical Details
  3. Quality Control Personnel Details
  4. Commercial Details

1. Expenses involved in obtaining BIS certificate for Carbon and Carbon Manganese Free Cutting Steels as per IS 4431 under the Product Certification (Scheme-I) of BIS :

• In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
• For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
• Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.

1. Role of ERCS Private Limited in getting your product certified :

• To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.
• ECRS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.

• Scope of work by ECRS Private Limited:

1. Ensuring the conformity of your product as per IS 4431:

ERCS Pvt. Ltd. has developed a vast network within the Steel Industry & various BIS departments to assist for ensuring conformity of the product Carbon and Carbon Manganese Free Cutting Steels according to according to IS 4431.

1. Effective documentation with the awareness of the BIS guidelines:

In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries.

We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.

1. A pre-visit can be paid at your factory premises:

In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.

1. Assistance for BIS audits:

We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.

Benefits of getting ISI Mark for Carbon and Carbon Manganese Free Cutting Steels to sell in Indian Market with our help

• The term “ISI mark" means, that a certain product conforms to the quality standards set up by the government.
• It is compulsory for Carbon and Carbon Manganese Free Cutting Steels to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.
• Getting certification improves the probability of your product to survive and compete in the market.
• Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.
• With the word of mouth of such client list, you can establish your credibility in the market.
• Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.