BIS Certification for
DC supplied/ battery-operated blenders, juicers IS 302 Part 1: 2024/IEC 60335-1
IS 302 Part 1:2024/IEC 60335-1
Getting BIS Certification for DC-supplied/Battery-operated Blenders and juicers indicates that your product has undergone the relevant testing and conforms to Indian safety requirements. The certification is compulsory for Indian and foreign manufacturers importing or selling them in India. To increase product safety and protect consumers, the Government of India mandates compliance with the relevant BIS standard for electrical appliances under IS 302 (Part 1): 2024 / IEC 60335-1, which specifies the general safety requirements for household and similar electrical appliances.
DC-supplied and battery-operated blenders and juicers have become very popular among Indian consumers because of their portability, rechargeable feature, and convenience for domestic, travel, sports, and outdoor use. Since these appliances contain electrical parts, rechargeable batteries, and sharp rotating blades, safety is extremely important to avoid electric shocks, overheating, battery problems, and mechanical injury. Whether you are an Indian manufacturer or a foreign one, BIS certification is a crucial step in preparing DC-powered or rechargeable blenders and juicers for the Indian market.
Testing Parameters for DC Supplied/ Battery-Operated blenders, juicers IS 302 Part 1: 2024/IEC 60335-1
Testing parameters for DC supplied /battery operated blenders and juicers under IS 302 Part 1/IEC 60335-1 as mandated by the Bureau of Indian Standards are listed below:
- Safety Evaluation of Metal-Ion Battery Packs: Detailed safety evaluation under modified overcharging, short-circuit protection, and thermal stability of built-in rechargeable battery packs.
- Operating Input Power and Current: Verify that DC voltage, current, and power input levels do not exceed rated values during normal use.
- Insulation and Electric Strength Testing: Insulation testing against leakage currents at operating temperature to avoid shocks to users.
- Heating and Thermal Performance: Temperature testing of motor windings, control circuitry and battery packs during heavy load mixing.
- Resistance to Moisture: Water ingress testing is especially important for this product due to portable blender/juicer caps and USB charger port exposure to splashing liquids or washing directly under tap water.
- Abnormal Conditions: Inducing a locked-rotor condition (jammed blades) and testing of response mechanisms.
- Mechanical Strength & Stability: Drop and vibration testing of the unit to ensure there is no breakage of the housing exposing the user to danger from moving parts.
BIS Certification Process for DC Supplied/ Battery-Operated blenders, juicers Parts in India
Obtaining BIS Certification for DC-supplied or battery-operated blenders, juicers in India requires testing samples at a BIS-accredited lab, submitting an application via the Manakonline Portal, and passing a factory inspection. Compliance falls under IS 302 (Part 1): 2024 and is mandatory starting October 1, 2026, for general enterprises.
- BIS Certification Process for Indian Manufacturers
- BIS Certification Process for Foreign Manufacturers
ISI Mark Certification Cost for DC Supplied/ Battery-Operated blenders, juicers (2026)
The BIS Certification cost for DC Supplied/ Battery-Operated blenders, juicers is given below:
|
S No. |
Particular |
Amount (INR) |
Remarks |
|---|---|---|---|
|
1. |
Application Fee |
1000 |
To be paid directly to BIS |
|
2. |
Audit Fee |
7000 |
To be paid directly to BIS |
|
3. |
License Fee |
1000 |
To be paid directly to BIS |
|
4. |
Sample Testing Fee |
As Applicable |
To be paid directly to BIS (Testing charges vary by product and lab). |
|
5. |
Minimum Advance Marking Fee |
As per actual |
To be paid directly to BIS (Marking fee varies as per Indian Standard) |
|
6. |
Renewal Fee |
1000 |
To be paid directly to BIS |
|
7. |
Inclusion Fee |
5000 |
To be paid directly to BIS |
|
8. |
ERCS Pvt Ltd Service Fee |
Please contact info@elitasrcs.com |
|
Why Choose ERCS as Your BIS Certification Consultant for DC Supplied/Battery-Operated Blenders, Juicers?
To get BIS Certification for DC-supplied/battery-operated blenders and juicers, one needs technical know-how, documentation, product testing, and proper coordination with the Bureau of Indian Standards (BIS). At ERCS Private Limited, we have made the BIS certification process easy for our clients by offering complete assistance in getting BIS certification for manufacturers both in India and abroad.
- End-to-End BIS Certification Assistance
- Technical Know-how Regarding Electrical Safety Standards
- Manufacturers in India & Abroad
- Testing & Documentation Services
- Coordination with BIS Recognised Laboratories
- Quick Approvals by Expert Team Members
- Partner with ERCS Private Limited to obtain your BIS Certification efficiently and confidently.