BIS Certification for HDPE/ PP Woven Sacks for Packaging Food Grains (10KG / 15KG / 20KG / 25KG / 30KG) IS 16208
Category: BIS Certification
Introduction to Indian Standard IS 14887; HDPE/ PP woven sacks for packaging food grains (50kg). IS 14887 cover HDPE/ PP woven sacks for packaging food grains (50kg). This standard specifies the manufacturing, chemical and physical requirements and testing of HDPE/. Introduction to Indian Standard IS 16208; HDPE/ PP Woven sacks for packaging food grains (10kg / 15kg / 20kg / 25kg / 30kg). IS 16208 cover HDPE/ PP Woven sacks for packaging food grains (10kg / 15kg / 20kg / 25kg / 30kg). This standard specifies the manufacturing, chemical and physical requirements and testing of HDPE/ PP Woven sacks for packaging food grains (10kg / 15kg / 20kg / 25kg / 30kg).
Specification of IS 16208
IS 16208 specifies the quality parameters or characteristics of the HDPE/ PP Woven sacks for packaging food grains (10kg / 15kg / 20kg / 25kg / 30kg) as follows
- Dimension
- Inside length
- Inside width
- Ends per dm
- Picks per dm
- Mass of the sack
- Average Breaking Strength of fabric
- Minimum Breaking Strength of bottom seam
- Elongation at break of fabric
- Breaking Strength of fabric after exposure to UV radiation
- Ash Content
Mandate for ISI Mark Certification of HDPE/ PP Woven sacks for packaging food grains (10kg / 15kg / 20kg / 25kg / 30kg) (IS 16208) :
- Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Commerce and Industry, Department for Promotion of Industry and Internal Trade after consulting the Bureau of Indian Standards has issued the Quality control order.
- As per the Quality control order, all the manufacturers of HDPE/ PP Woven sacks for packaging food grains (10kg / 15kg / 20kg / 25kg / 30kg) are obligated to obtain ISI Mark Certification.
Types of Woven Sacks covered under IS 16208
|
“Licence is granted to use Standard Mark on HDPE/ PP Woven sacks for packaging food grains (10kg / 15kg / 20kg / 25kg / 30kg) as per IS 16208: 2015”. |
|
|
Types / Scope of License |
Type – I/II/III/IV Material – HDPE/PP |
Procedure to use ISI mark as per IS 16208
- BIS Certification for Indian Manufacturers (Standard Timeframe – 30 days)
- BIS FMCS License for Foreign Manufacturers (Standard Timeframe – 180 days)
Requirements to get the BIS license
- Conformity of Raw Material as per IS 16208
- In-house testing laboratory for mandatory tests
- Competent Quality Control Personnel
- Adherence to the BIS guidelines for PP Woven Sacks as per Indian standard IS 16208
- There are 3 major categories of document required to get the BIS license:
- Administrative Details
- Technical Details
- Quality Control Personnel Details
- Commercial Details
ISI Mark Certification Cost of IS 16208
Expenses involved in obtaining BIS certificate for HDPE/ PP Woven sacks for packaging food grains (10kg / 15kg / 20kg / 25kg / 30kg) as per IS 16208 under the Product Certification (Scheme-I) of BIS :
|
COST FOR BIS REGISTRATION / ELECTRONICS PRODUCTS (Government Costs) |
|||
|
Type of Fee |
New Application |
Renewal |
Inclusion |
|
Application Fee |
1000 |
1000 |
1000 |
|
Processing Fee* |
25,000x2 = 50,000 |
25,000x2 = 50,000 |
15,000x2= 30,000 |
|
Registration Fee* |
1000 x 2 = 2000 |
1000 x 2 = 2000 |
1000 x 2 = 2000 |
|
Total |
53,000 |
53,000 |
30,000 |
|
Note* 1. The processing fee and registration fee need to be paid within 2 years, as registration numbers will be granted initially for two years. 2. The cost of BIS registration will depend on the following factors: · Location and Name of the Manufacturing Process (Overseas/ Domestic) · Types of Products and model quantity · Testing fee for the products · Govt. Fee (BIS) and ERCS Service fee |
|||
- In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
- For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
- Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its ISI Mark certification
Role of ERCS Private Limited in getting your product certified :
- To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.
- ECRS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.
Scope of work by ECRS Private Limited:
- Ensuring the conformity of your product as per IS 16208:
ERCS Pvt. Ltd. has developed a vast network within the Plastic Packaging Industry & various BIS departments to assist for ensuring conformity of the product HDPE/ PP Woven sacks for packaging food grains (10kg / 15kg / 20kg / 25kg / 30kg) according to according to IS 16208.
- Effective documentation with the awareness of the BIS guidelines:
In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries.
We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.
- A pre-visit can be paid at your factory premises:
In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.
- Assistance for BIS audits:
We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.
Benefits of getting ISI Mark for HDPE/ PP Woven sacks to sell in Indian Market with our help
- The term “ISI mark" means that a certain product conforms to the quality standards set up by the government.
- It is compulsory for HDPE/ PP Woven sacks for packaging food grains (10kg / 15kg / 20kg / 25kg / 30kg) to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.
- Getting certification improves the probability of your product to survive and compete in the market.
- Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.
- With the word of mouth of such client list, you can establish your credibility in the market.
- Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.