BIS Certification for
Toilet Appliances
IS 302 Part 1
BIS Certification for toilet appliances under IS 302 Part 1 ensures product safety and regulatory compliance for a wide range of Household and similar electrical appliances, helping manufacturers meet the quality and safety requirements set by the Bureau of Indian Standards (BIS). Products certified under this standard demonstrate compliance with electrical safety, insulation and other critical safety requirements.
Sanitary equipment, such as bidet seats, electric toilets, and self-flushing mechanisms, is common in residential premises, hotels, hospitals, shopping malls, and offices in India. The Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order makes it compulsory to have these devices in all premises in India. In view of the growing consumer demands and expectations for hygiene and comfort, the performance and safety of toilet appliances have become integral to contemporary sanitation. The Indian Standard IS 302 Part 1:2024 corresponds to the International Electrotechnical Commission standard IEC 60336-1, which provides design and safety considerations for electrical toilet devices. Non-compliance with the BIS licence in respect of toilet appliances attracts severe punishment and a fine.
What are Toilet Appliances under IS 302 Part 1: 2024/IEC 60335-1?
Under the IS 302 (Part 1): 2024 / IEC 60335-1: 2020 standard framework, "Toilet Appliances" refers to electrical and electronic devices integrated into modern sanitary systems that require electrical power to operate.
Because these products operate in high-humidity bathroom environments where electrical currents run close to water, they are classified as high-risk devices. In India, they fall under a mandatory quality control order (QCO), requiring valid BIS ISI Mark Certification to be legally manufactured, imported, or sold.
Testing Parameters for Toilet Appliances IS 302 Part 1: 2024/IEC 60335-1
Toilet appliances must be tested in accordance with IS 302 Part 1/IEC 60335-1 to obtain the BIS ISI mark. The applicable general safety testing parameters are as follows. These tests verify the appliance's electrical, mechanical, and thermal safety requirements:
- Moisture Resistance: These appliances are used in wet environments and must pass IP (Ingress Protection) water-resistance testing to ensure safe operation when exposed to humidity or accidental moisture.
- Protection Against Electric Shock: Testing ensures that no live parts are accessible to the user and that the user is protected from accidental contact with them.
- Leakage Current and Electric Strength: Appliances are tested at operating temperatures to ensure insulation integrity and prevent electrical leakage.
- Provision for Earthing: This test ensures that all conductive parts are safely grounded to reduce the risk of electric shock.
- Temperature Rise and Overheating: Testing verifies that heating components, motors, and wiring do not reach hazardous temperatures under both normal and abnormal operating conditions.
List of Documents Required for ISI Mark Certification of Toilet Appliances
Before you apply for the ISI Mark, keep all the required documents ready. Check the list of documents needed for BIS certification of Toilet Appliances below.
BIS Certification Process for Toilet Appliances in India
Both Indian and foreign manufacturers must follow the certification process to understand the procedure to obtain the ISI Mark on their products
- BIS Certification Process for Indian Manufacturers
- BIS Certification Process for Foreign Manufacturers
BIS Certification Cost for Toilet Appliances (2026)
Below, you can go through the table for the BIS Certification cost of Toilet Appliances:
|
S No. |
Particular |
Amount (INR) |
Remarks |
|
1. |
Application Fee |
1000 |
To be paid directly to BIS |
|
2. |
Audit Fee |
7000 |
To be paid directly to BIS |
|
3. |
License Fee |
1000 |
To be paid directly to BIS |
|
4. |
Sample Testing Fee |
As Applicable |
To be paid directly to BIS (Testing charges vary by product and lab). |
|
5. |
Minimum Advance Marking Fee |
As per actual |
To be paid directly to BIS (Marking fee varies as per Indian Standard) |
|
6. |
Renewal Fee |
1000 |
To be paid directly to BIS |
|
7. |
Inclusion Fee |
5000 |
To be paid directly to BIS |
|
8. |
ERCS Pvt Ltd Service Fee |
Please contact info@elitasrcs.com |
|
Why Choose ERCS as Your BIS Certification Consultant for Toilet Appliances?
As ERCS – your consultant for Toilet Appliances, you are assured of compliance with some of the strictest safety regulations (for instance, IS 302 Part 1: 2024). It guarantees end-to-end assistance with BIS Certification and ISI Mark consultancy in India.ERCS, thus ensuring the avoidance of any customs issues, seizure of goods, and/or penalties arising from non-compliance.
- First-hand knowledge of IS 302 (Part 1): 2024: This standard is used for the safety of appliances. The time taken for the certification process under this standard would be about 30 days for Indian Manufacturers and 180 days for foreign Manufacturers. We carry out the entire certification process seamlessly.
- Full process management rather than just consultation: The documentation process, product testing, application submission, and interactions with BIS authorities are all managed by ERCS, so clients need not interact with multiple authorities simultaneously.
- Experience and services offered: ERCS Pvt Ltd is a consultancy company based in Noida, which was established in 2019.
- Support for foreign manufacturers: ERCS Pvt Ltd provides end-to-end compliance services for BIS and FMCS. Having extensive experience like this might come in handy if a client wishes to obtain certifications for different product lines.
- Foreign Manufacturer Services offered: ERCS Pvt Ltd also offers services as an Authorised Indian Representative (AIR), FMCS, and FMCS support services to foreign manufacturers.