Electric Knife Sharpeners IS 302 Part 1/IEC 60335-1
IS 302 Part 1/IEC 60335-1
BIS certification for electric knife sharpeners, IS 302 Part 1, is a mandatory requirement in India. It serves as a quality benchmark and helps to ensure that consumer products are safe & reliable. To ensure the safety of these appliances for consumer use and to meet standards, the Bureau of Indian Standards (BIS) issues a specific certification. Once tested and certified, the ISI mark can be used by the manufacturer on its products.
Today, BIS certification for electric knife sharpeners is an entry point for manufacturers to demonstrate compliance, reliability, and high product quality in India. This strengthens consumers' confidence in the appliance's quality and performance.
Electric Knife Sharpeners under IS 302 Part 1 Under Scheme 1
Electric knife sharpeners are machines that sharpen blunt knives by using small spinning wheels or belts made of rough material that gently rub and shape the knife’s edge automatically.
IS 302 Part 1/IEC 60335-1 is an Indian Standard published by the Bureau of Indian Standards (BIS). This standard provides the general safety requirements for household and similar electrical appliances. This standard ensures that appliances such as Electric Knife Sharpeners are safe to use and do not create any electrical, mechanical, or fire hazards. The recent Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order 2026 Update shows the revised timeline for certification, which shall come into force from 1st of October, 2026.
Key Highlights for IS 302 (Part 1) for Electric Knife Sharpeners
|
S no. |
Key Requirement |
Details |
|
1. |
Applicable Standard |
IS 302 Part 1 aligned with IEC 60335-1 |
|
2. |
Voltage Limits |
Electric sharpeners must operate at rated voltages of up to 250V single-phase AC and 415 V three-phase AC. |
|
3. |
Physical Stability |
The sharpener must stay firmly anchored to the kitchen counter during operation to prevent slipping or tipping. |
|
4 |
Marking labels |
The product must display its voltage, power rating, manufacturer details, and the ISI logo on its base. |
|
5. |
Earthing Provision |
Ensures the appliance is properly grounded, so electrical faults are safely carried away and do not cause electric shocks to users. |
Benefits of BIS Certification for Electric Knife Sharpeners
The key benefits of obtaining BIS Certification include:
- BIS Certification is mandatory to sell your product in the Indian market legally
- It helps to avoid legal issues, penalties, and product seizures.
- Ensures the product is protected against electric shock, overheating, and fire.
- Gives customers confidence in your product's quality and reliability.
- Improves your brand image and builds trust among buyers.
- Documents required for Electric Knife Sharpeners Certification
- The following documents are required by manufacturers and importers
- Duly filled and completed application form
- Business registration Proof
- Manufacturing Process Details
- Factory layout and equipment details
- Product specification and technical details
- Test reports from the BIS authorised laboratory
- Quality Control Plan
- Appointment of Authorised Indian Representative (AIR)
- Declaration of Conformity to Indian Standards
Applicable Test Parameters for Electric Knife Sharpeners IS 302 (Part 1)
Important BIS Test Parameters for Electric Knife Sharpeners. These tests must be conducted as per IS 302 Part 1/IEC 60335-1
- Protection Against Electric Shock: This test ensures that users of knife sharpeners will not come into contact with live electrical parts.
- Power Input and Current Test: Verifies that the appliance operates within its rated electrical limits.
- Heating Test: Ensures the product does not reach unsafe temperatures during normal use.
- Leakage Current Test: This test measures unwanted current leakage to prevent electric shock hazards.
- Electric Strength Test: It confirms that the product is properly insulated and can withstand high voltages without breakdown.
- Moisture Resistance Test: Evaluates safety under humid or accidental moisture exposure.
- Mechanical Strength Test: Ensures the housing and components can withstand impacts and normal handling.
- Marking and Instruction: Compliance checks must include labels, ratings, warnings, and user instructions.
Process of BIS Certification of Electric Knife Sharpeners
The BIS certification process for Electric Knife Sharpeners involves multiple steps to evaluate a product's compliance with the required standard thoroughly. Here is a general overview of the certification process:
Step1: Application Submission- Fill out the application form and submit online at manakonline in the official BIS certification portal.
Step 2: Documentation Submission- Collect all required documents, along with the product specification and technical document, in accordance with the BIS format.
Step 3: BIS Factory Inspection - BIS Officials will review the submitted documents and confirm compliance with the BIS Standard.
Step 4: Product Testing - Send product samples to a BIS-approved lab for safety and quality testing in accordance with BIS standards.
Step 5: Grant of License - BIS approves the application after reviewing all documents and test reports and authorises the use of the ISI mark.
To know more about the process in detail for both Indian and foreign manufacturers, please visit:
- BIS Mark Certification Process - Indian Manufacturer
- BIS Mark Certification Process - Foreign Manufacturer
Cost of BIS Certification under IS 302 Part 1
Below, you can go through the table for the BIS Certification cost of Electric Knife Sharpeners:
|
S No. |
Particular |
Amount (INR) |
Remarks |
|
1. |
Application Fee |
1000 |
To be paid directly to BIS |
|
2. |
Audit Fee |
7000 |
To be paid directly to BIS |
|
3. |
License Fee |
1000 |
To be paid directly to BIS |
|
4. |
Sample Testing Fee |
As Applicable |
To be paid directly to BIS (Testing charges vary from product to product and lab to lab.) |
|
5. |
Minimum Advance Marking Fee |
As per actual |
To be paid directly to BIS (Marking fee varies as per Indian Standard) |
|
6. |
Renewal Fee |
1000 |
To be paid directly to BIS |
|
7. |
Inclusion Fee |
5000 |
To be paid directly to BIS |
|
8. |
ERCS Pvt Ltd Service Fee |
Please contact info@elitasrcs.com |
|
Validity Period & BIS Licence Renewal India
The BIS license for electric knife sharpeners is valid for up to 5 years. Renewal fees are payable annually as per the recent BIS Conformity Assessment updates. The BIS certification process for electric knife sharpeners typically takes 3–6 months, depending on lab testing turnaround and document completeness.
Why choose ERCS Private Limited for your BIS Consultation
- Obtaining BIS certification is a complex process; it involves product testing, technical documentation, regulatory compliance, and coordination with BIS authorities. ERCS Private Limited simplifies this journey by offering end-to-end certification support.
- ERCS Private Limited has been assisting manufacturers, importers, and brand owners with BIS, CRS, FMCS, WPC, BEE, EPR, and other regulatory approvals.
- ERCS has a team of qualified professionals and technical specialists with experience in BIS Certification product testing and regulatory requirements who will guide you throughout the certification process.
- Whether you are a domestic or foreign manufacturer, ERCS Private Limited provides the technical expertise, industry knowledge, and professional support which is needed to achieve BIS certification smoothly and successfully.
- With a dedicated compliance team, ERCS Private Limited has a proven track record of managing its global manufacturers and is a trusted name in BIS Certification and compliance consulting in India.
- ERCS has successfully supported 1500+ product certifications across 30+ countries.
FAQs
Q1.Is IEC 60335-1 the safety of household and similar electrical appliances?
Ans: Yes, IEC 60335-1 is the internationally recognised standard for the safety of household and similar electrical appliances.
Q2.Is 302 Part 1 the latest version?
Ans: Yes, IS 302 Part 1 is the latest version of the general requirements standard, which is IS 302 (Part 1), which is harmonised with IEC 60335-1
Q3. How to obtain a BIS certificate for imports into India?
Ans: To get a Bureau of Indian Standards (BIS) Certificate for importing into India, a foreign manufacturer must apply through the Foreign Manufacturers Certification Scheme (FMCS) or Compulsory Registration Scheme (CRS) by appointing an Authorised Indian Representative.
Q4. Which specific standard applies to Electric Knife Sharpeners?
Ans. The Electric Knife Sharpeners must comply with IS 302 (Part 1) or General Requirements and IS 302-2 for Particular Requirements.
Q5.Can a trader get a BIS certificate?
Ans: No, a trader is not eligible for obtaining a (Bureau of Indian Standards) BIS certificate.