BIS Certification for Steel Ingots, blooms, and billets for production of mild steel wire for production of mild steel wire rods for general engineering purposes – Specification IS 8952: 1995

Steel Ingots, blooms, and billets for production of mild steel wire for production of mild steel wire rods for general engineering  purposes – Specification IS 8952. As a product manufacturer, you need to obtain BIS certification for Steel ingots, blooms, and billets for production mild steel wire rods as per IS 8952: 1995. Without a BIS certificate, it's difficult to beat the competition in the Indian market. Consumers need assurance regarding the quality, safety, and reliability of the products they purchase. The ISI mark helps your customers know that the product meets Indian standards.

 

To enhance your production and sales, obtaining a BIS license is essential. The BIS (Bureau of Indian Standards) issues the BIS certificate, which manufacturers can apply on their own or with the assistance of a BIS Consultant in India. Here, we will discuss how a BIS consultant helps you to obtain this in a hassle-free manner. Huge benefits to obtaining ISI Mark Certification in India for your products. Let’s start to take a closer look.

 

Overview of BIS Certification for IS 8952 

Indian Standard - IS 8952: 1995 specifies the manufacturing, chemical, and physical requirements and testing of  Steel ingots, blooms, and billets for production mild steel wire rods for general engineering purposes. Here’s the list of parameters or characteristics. Let’s clarify:

1. Chemical Composition
2. Ladle Analysis
3. Product Analysis
4. Sulphur print tests
5. Freedom from Defects
6. Inclusion Content
7. Dimensions and Tolerances

 

Licence is granted to use Standard Mark as per IS 8952 with the following scope:

• Name of the product: Steel Ingots, Blooms, and Billets for the Production of Mild Steel Wire Rods for General Engineering Purposes
• Type: Cast Billet Ingots, Billets, Blooms of Grade …., with/without  microalloying

 

BIS Certification Process for IS 8952

Know the process to get BIS certification as per IS 8952. Here’s the list that will help manufacturers who want to apply for a BIS Certificate.  Manufacturers can follow the steps below:

• Product Identification: Visit the BIS official website and go to the list of BIS mandatory products.
• Select the relevant Indian Standard (IS): To clarify the appropriate IS standard for your products
• Manufacturer Registration: Submit your manufacturing Unit details to BIS, like the firm’s name, address, and product information.
• Application for certification: Submit necessary documents, including product information, manufacturing process, and test report, if applicable.
• Testing: Submit a Testing sample of the product to a BIS-approved laboratory
• You have two options for testing: Testing can be conducted in-house (if you have a BIS-recognised lab) or at an external BIS-recognised facility. Alternatively, testing can be done at a BIS laboratory.
• Inspection and Audit: BIS may inspect and audit your manufacturing facility to verify compliance with quality control procedures.
• Certification Grant: BIS will certify your product only if it meets the IS standards criteria.
• Surveillance: BIS conducts regular surveillance to ensure continued compliance.
• Renewal: Certification is valid for a specified period, usually one to five years. Apply for renewal before your certification expires.

 

What is the Timeline of BIS Certification for IS Number IS 8952

After applying for BIS certification, it is important to know the timelines for obtaining certification for your products. Below is a list of the timelines. Let's take a look:

• BIS certification for Indian Manufacturers (Standard Timeframe – 30 days)
• BIS certification for Foreign Manufacturers FMCS (Standard Timeframe – 180 days)

 

BIS License Requirements for Steel Ingots, Blooms, and Billets for Production of Mild Steel Wire Rods for General Engineering Purposes?

Requisites to get the BIS license for Steel ingots, blooms and billets for the production of mild steel wire for general engineering  purposes:

• Conformity of Raw Material as per IS 8952
• In-house testing laboratory for mandatory tests
• Competent Quality Control Personnel

Adherence to the BIS guidelines for Steel ingots, blooms and billets for mild steel wire rods as per Indian standard 8952. There are 3 major categories of documents required to get the BIS license:

• Administrative Details
• Technical Details
• Quality Control Personnel Details

 

BIS Certification cost for Steel ingots, blooms and billets for the production of mild steel wire rods IS 8952

S No.	Particular	Amount (INR)	Remarks
1.	Application Fee	1000	To be paid directly to BIS
2.	Audit Fee	7000	To be paid directly to BIS
3.	License Fee	1000	To be paid directly to BIS
4.	Sample Testing Fee	As Applicable	To be paid directly to BIS (Testing charges vary from product to product and lab to lab.)
5.	Minimum Advance Marking Fee	As per the actual	To be paid directly to BIS (Marking fee varies as per Indian Standard)
6.	Renewal Fee	1000	To be paid directly to BIS
7.	Inclusion Fee	5000	To be paid directly to BIS
8.	ERCS Pvt Ltd Service Fee	Please contact info@elitasrcs.com

 

• In the BIS certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards. For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.

 

• Apart from the charges mentioned above in the table, we may ask you to pay/reimburse for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.

 

BIS Certification Benefits for  Steel ingots, blooms and billets for the production of mild steel wire for general engineering  purposes 

Benefits of getting ISI Mark for  Steel ingots, blooms and billets production of mild steel wire rods for general engineering  purposes  to sell in the Indian Market with our help:

• The term “ISI mark" means that a certain product conforms to the quality standards set by the government.
• Steel ingots, blooms and billets for the production of mild steel wire rods for general engineering purposes must obtain the ISI Mark, and the violators are penalized with the material seized and a significant sum as a fine.
• Getting certification improves the probability of your product surviving and competing in the market.
• Customers tend to buy ISI-certified products as they ensure safety and standard quality. Hence, with certified products, you can win the confidence and trust of the buyer.
• With the word of mouth of such a client list, you can establish your credibility in the market.
• Hence, with the renowned brand, you can raise the standard and benchmark the market value of the product.

 

Role of ERCS Private Limited in getting your product certified:

To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product follows the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards. ERCS Private Limited will be your friend, philosopher, and guide in the whole process of getting your product certified by the concerned authorities/ departments.

 

Scope of work by ERCS Private Limited:

• Ensuring the conformity of your product as per IS 8952

ERCS Pvt. Ltd. has developed a vast network within the Cement Industry & various BIS departments to assist in ensuring conformity of the product  Steel ingots, blooms and billets for the production of mild steel wire rods according to IS 8952.

 

• Effective documentation with awareness of the BIS guidelines:

To facilitate the industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 100 projects and various acquaintances in the Industry. We understand the Indian Standard Specifications & BIS guidelines, which we interpret to the Quality Control Personnel so we can do a reliable and effective documentation of your product by the BIS guidelines.

 

• A pre-visit can be paid for at your factory premises:

In the process of getting BIS certification, the officer from the BIS authority visits the factory for inspection. To get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted to remove the elements of fallibility.

 

• Assistance for BIS audits:

We will explain the whole procedure of conducting a BIS inspection and make you aware of the things that need to be prepared and readily available at the time of inspection.

 

Similar Mandatory Products for BIS Certification are as below:

• BIS certification for Hot Dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement - IS 12594 
• BIS Certification for Hot Dip Aluminium- Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain) -  IS 15961
• BIS certification for Hot-Dip Galvanized/ Galvannealed Steel Sheet And Strips For Automotive Applications - IS 18385
• BIS certification for Hot Dip Galvanized Stay Strand - IS 2141
• BIS certification for Hot-Dip Terne Coated Carbon Steel Sheets - IS 12313