Mandatory
Oil Pressure Stove, Offset Burner Type IS 10109
Like any mechanical device, oil heating systems require all components to work together. One component that is particularly important to the efficient and effective operation of your heating oil system is the burner. There is a piece on the burner called a nozzle that turns the oil into a very fine spray. This oil mist mixes with air and ignites in the combustion chamber, which becomes very hot.
Like any mechanical device, oil heating systems require all components to work together. One component that is particularly important to the efficient and effective operation of your heating oil system is the burner. There is a piece on the burner called a nozzle that turns the oil into a very fine spray. This oil mist mixes with air and ignites in the combustion chamber, which becomes very hot. IS 10109 covers Oil Pressure Stove, Offset Burner Type. This standard covers the requirements and tests for offset burner type oil pressure stoves, intended for domestic and commercial use, burning pressurized kerosene oil under a normal working pressure of 100 kN/m2to 200 kN/m2 (1 kgf/cm2 to 2 kgf/cm2).
Specification of IS 10109
IS 10109 specifies the quality parameters or characteristics of the Oil Pressure Stove, Offset Burner Type as follows
- Air Pressure Test
- Safety Pressure Test
- Bursting Pressure Test
- Thermal Efficiency
- Combustion Efficiency
- Fuel Creep
- Resistance to Draught
- Surface Temperature
Mandate for ISI Mark Certification of Oil Pressure Stove, Offset Burner Type (IS 10109) :
Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry Industry, Department Industrial Policy and Policy and Promotion in exercise of the powers conferred by section 3 of the Essential Commodities Act after consulting the Bureau of Indian Standards has issued the Oil Pressure Stoves (Quality control) order, 1997. As per the this Quality control order, allthe manufacturers of Oil Pressure Stove, Offset Burner Type are obligated to obtain ISI Mark Certification.
Types of Oil Pressure Stoves covered under IS 10109
|
“Licence is granted to use Standard Mark on Oil Pressure Stove, Offset Burner Type as per IS 10109: 2002”. |
|
|
Types |
Oil Pressure Stove, Offset Burner Type |
Procedure to use ISI mark as per IS 10109
Process to Obtain BIS Certification India for Indian Manufacturers
Process to Obtain BIS FMCS Certification for Foreign Manufacturers
Requisites to get the BIS license for Oil Pressure Stove, Offset Burner Type
- Conformity of Raw Material as per IS 10109
- In-house testing laboratory for mandatory tests
- Competent Quality Control Personnel
- Adherence to the BIS guidelines for Oil Pressure Stove, Offset Burner Type as per Indian standard IS 10109
- There are 3 major categories of document required to get the BIS license:
- Administrative Details
- Technical Details
- Quality Control Personnel Details
- Commercial Details
Cost of ISI Mark on IS 10109
Expenses involved in obtaining BIS certificate for Oil Pressure Stove, Offset Burner Type as per IS 10109 under the Product Certification (Scheme-I) of BIS :
|
S No. |
Particular |
Amount (INR) |
Remarks |
|
1. |
Application Fee |
1000 |
To be paid directly to BIS |
|
2. |
Audit Fee |
7000 |
To be paid directly to BIS |
|
3. |
License Fee |
1000 |
To be paid directly to BIS |
|
4. |
Sample Testing Fee |
As Applicable |
To be paid directly to BIS (Testing charges vary from product to product and lab to lab.) |
|
5. |
Minimum Advance Marking Fee |
As per actual |
To be paid directly to BIS (Marking fee varies as per Indian Standard) |
|
6. |
Renewal Fee |
1000 |
To be paid directly to BIS |
|
7. |
Inclusion Fee |
5000 |
To be paid directly to BIS |
|
8. |
ERCS Pvt Ltd Service Fee |
Please contact info@elitasrcs.com |
|
|
Remarks |
Including all the taxes |
||
- In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
- For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
- Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.
Role of ERCS Private Limited in getting your product certified :
To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.
ECRS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.
Scope of work by ERCS Private Limited:
- Ensuring the conformity of your product as per IS 10109:
ERCS Pvt. Ltd. has developed a vast network within the Oil Pressure Stove Industry & various BIS departments to assist for ensuring conformity of the product Oil Pressure Stove, Offset Burner Type according to according to IS 10109.
- Effective documentation with the awareness of the BIS guidelines:
In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries.
We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.
- A pre-visit can be paid at your factory premises:
In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.
- Assistance for BIS audits:
We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.
Benefits of getting ISI Mark for Oil Pressure Stove, Offset Burner Type to sell in Indian Market with our help
- The term “ISI mark" means, that a certain product conforms to the quality standards set up by the government.
- It is compulsory for Oil Pressure Stove, Offset Burner Type to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.
- Getting certification improves the probability of your product to survive and compete in the market.
- Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.
- With the word of mouth of such client list, you can establish your credibility in the market.
- Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.