BIS Certification for TEXTILES - Tactical 3 Point Sling Universal - Specification IS 16725
Category: BIS Certification
Introduction to Indian Standard IS 16725; Textiles - Textiles - Tactical 3 point sling universal - Specification. IS 16725 covers Textiles - Textiles - Tactical 3 point sling universal - Specification The specification prescribes the requirement of ‘Tactical 3 points sling universal’ herein referred as ‘Sling’
Specification of IS 16725
IS 16725 specifies the quality parameters or characteristics of the Textiles - Textiles - Tactical 3 point sling universal - Specification as follows :
(i) Shape Design and dimension
(ii) Tenacity of single ply yarn
(iii) Number of ends and picks
(iv) Nature of filament
(v) Width and mass
(vi) Colour fastness to light
(vii) Colour fastness to rubbing
(viii) Colour fastness to washing
(ix) Dimension changes due to relaxation
(x) Material of woven elastic tape used in the loops
(xi) Stitching
(xii) Sewing thread
Mandate for ISI Mark Certification of Textiles - Textiles - Tactical 3 point sling universal - Specification (IS 16725)
In exercise of the powers conferred by sub-sections (1) and (2) of section 16 read with section 17 and sub-section (3) of section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government is of the opinion that it is necessary so to do in the public interest and after consulting the Bureau of Indian Standards, hereby makes the following Order, namely Protective Textiles (Quality Control) Order, 2022. As per the Protective Textiles (Quality control) order, all the manufacturers of Textiles - Textiles - Tactical 3 point sling universal - Specification are obligated to obtain ISI Mark Certification.
Types of Textiles Tactical 3-point sling universal - Specification covered under IS 16725
|
Licence is granted to use Standard Mark as per IS 16725 with the following scope: |
|
|
Types / Grades / Variety |
Textiles - Textiles - Tactical 3 point sling universal |
Procedure to obtain BIS Certification of IS 16725
Requirements to get the BIS license for Textiles - Tactical 3-point sling universal - Specification
- Conformity of Raw Material as per IS 16725
- In-house testing laboratory for mandatory tests
- Competent Quality Control Personnel
- Adherence to the BIS guidelines for Textiles - Textiles - Tactical 3 point sling universal - Specification as per Indian standard IS 16725
- There are 3 major categories of document required to get the BIS license:
a. Administrative Details
b. Technical Details
c. Quality Control Personnel Details
d. Commercial Details
Cost of ISI certification for IS 16725
Expenses involved in obtaining BIS certificate for Textiles - Textiles - Tactical 3 point sling universal - Specification as per IS 16725 under the Product Certification (Scheme-I) of BIS :
|
S No. |
Particular |
Amount (INR) |
Remarks |
|
1. |
Application Fee |
1000 |
To be paid directly to BIS |
|
2. |
Audit Fee |
7000 |
To be paid directly to BIS |
|
3. |
License Fee |
1000 |
To be paid directly to BIS |
|
4. |
Sample Testing Fee |
As Applicable |
To be paid directly to BIS (Testing charges vary from product to product and lab to lab.) |
|
5. |
Minimum Advance Marking Fee |
As per actual |
To be paid directly to BIS (Marking fee varies as per Indian Standard) |
|
6. |
Renewal Fee |
1000 |
To be paid directly to BIS |
|
7. |
Inclusion Fee |
5000 |
To be paid directly to BIS |
|
8. |
ERCS Pvt Ltd Service Fee |
Please contact info@elitasrcs.com |
|
|
Remarks |
Including all the taxes |
||
- In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
- For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
- Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.
Role of ERCS Private Limited in getting your product certified :
To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards. ERCS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.
Scope of work by ERCS Private Limited:
a. Ensuring the conformity of your product as per IS 16725:
ERCS Pvt. Ltd. has developed a vast network within the Protective textile Industry & various BIS departments to assist for ensuring conformity of the product Textiles - Textiles - Tactical 3 point sling universal - Specification according to according to IS 16725.
b. Effective documentation with the awareness of the BIS guidelines:
In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries.
We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.
c. A pre-visit can be paid at your factory premises:
In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.
d. Assistance for BIS audits:
We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.
Benefits of getting ISI Mark for IS 16725
- The term “ISI mark" means, that a certain product conforms to the quality standards set up by the government.
- It is compulsory for Textiles - Textiles - Tactical 3 point sling universal - Specification to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.
- Getting certification improves the probability of your product to survive and compete in the market.
- Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.
- With the word of mouth of such client list, you can establish your credibility in the market.
- Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.