BIS Certification for Galvanized Structural Steel IS 16732
Category: BIS Certification
Introduction to Indian Standard IS 16732 covers Galvanized Structural Steel. This standard specifies the manufacturing, chemical and physical requirements and testing of Galvanized Structural Steel.
BIS Specification for IS 16732
IS 16732 specifies the quality parameters or characteristics of the Galvanised Structural Steel as follows
(i) Chemical Composition
(ii) Freedom from defects
(iii) Mass of coating
(iv) Quality of Zinc
(v) Uniformity of zinc coating
(vi) Thickness and adhesion test on zinc coating
(vii) Tensile test
(viii) Impact test
(ix) Bend test
(x) Dimension and Tolerances
Mandate for ISI Mark Certification of Galvanised Structural Steel
- Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Steel after consulting the Bureau of Indian Standards has issued the Quality control order.
- As per the Quality control order, all the manufacturers of Galvanized Structural Steel are obligated to obtain ISI Mark Certification.
Types of Galvanized Structural Steel covered under IS 16732 :
|
“Licence is granted to use Standard Mark on Galvanized Structural Steel as per IS 16732:2019”. |
|
|
Types / Scope of license |
Grade – EG250, EG275, EG 300, EG 350,……… Quality – A/BR/B0/C |
Procedure to obtain BIS Certification of Galvanized Structural Steel to use ISI mark as per IS 16732
- ISI Certification India For Indian Manufacturers (Standard Timeframe – 30 days)
- FMCS BIS Certification Process for Foreign Manufacturers (Standard Timeframe – 180 days)
BIS Requirements for Galvanized Structural Steel
Requirements to get the BIS license for Galvanized Structural Steel
- Conformity of Raw Material as per IS 16732
- In-house testing laboratory for mandatory tests
- Competent Quality Control Personnel
- Adherence to the BIS guidelines for Galvanized Structural Steel as per Indian standard IS 16732
- There are 3 major categories of documents required to get the BIS license:
a. Administrative Details
b. Technical Details
c. Quality Control Personnel Details
d. Commercial Details
ISI Certification Cost for IS 16732
Expenses involved in obtaining the BIS certificate for Galvanized Structural Steel as per IS 16732 under the Product Certification (Scheme-I) of BIS :
|
COST FOR BIS REGISTRATION / ELECTRONICS PRODUCTS (Government Costs) |
|||
|
Type of Fee |
New Application |
Renewal |
Inclusion |
|
Application Fee |
1000 |
1000 |
1000 |
|
Processing Fee* |
25,000x2 = 50,000 |
25,000x2 = 50,000 |
15,000x2= 30,000 |
|
Registration Fee* |
1000 x 2 = 2000 |
1000 x 2 = 2000 |
1000 x 2 = 2000 |
|
Total |
53,000 |
53,000 |
30,000 |
|
Note* 1. The processing fee and registration fee need to be paid within 2 years, as registration numbers will be granted initially for two years. 2. The cost of BIS registration will depend on the following factors: · Location and Name of the Manufacturing Process (Overseas/ Domestic) · Types of Products and model quantity · Testing fee for the products · Govt. Fee (BIS) and ERCS Service fee |
|||
· In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
· For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
· Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.
Role of ERCS Private Limited in getting your product certified :
To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards. ERCS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.
Scope of work by ECRS Private Limited:
a. Ensuring the conformity of your product as per IS 16732:
ERCS Pvt. Ltd. has developed a vast network within the Structural Steel Industry various BIS departments to assist for ensuring conformity of the product Galvanized Structural Steel according to IS 16732.
b. Effective documentation with the awareness of the BIS guidelines:
In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 450 projects and technically competent acquaintances in various Industries.
We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.
c. A pre-visit can be paid at your factory premises:
In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.
d. Assistance for BIS audits:
We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.
BIS Approval Benefits for Galvanized Structural Steel Certification
Benefits of getting ISI Mark for Galvanized Structural Steel to sell in Indian Market with our help
§ The term “ISI mark" means, that a certain product conforms to the quality standards set up by the government.
§ It is compulsory for Galvanized Structural Steel to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.
§ Getting certification improves the probability of your product to survive and compete in the market.
§ Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.
§ With the word of mouth of such client list, you can establish your credibility in the market.
§ Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.