Free Consultation
info@elitasrcs.com | ➀ +91-9076611766 ➁ +91-9076611767
BIS QCOs | Government Guidelines
Mandatory

Wrought Copper Tubes for Refrigeration and Air Conditioning IS 10773

IS 10773

BIS ISI Certification for Wrought Copper Tubes for Refrigeration and Air Conditioning in India
Home BIS Certification Wrought Copper Tubes for Refrigeration and Air Conditioning IS 10773
Introduction to Indian Standard IS 10773 covers Wrought Copper Tubes for Refrigeration and Air Conditioning. This standard specifies the manufacturing, chemical, and physical requirements, as well as the testing, of Wrought Copper Tubes for Refrigeration and Air Conditioning.
 

Specification of  IS 10773

Wrought Copper Tubes specifies the quality parameters or characteristics of the Wrought Copper Tubes for Refrigeration and Air Conditioning  as follows
(i)           Chemical Composition
(ii)         Dimension and Tolerance
(iii)        Freedom from defects
(iv)        Tensile Test and elongation
(v)          Hardness
(vi)        Drift Expanding test
(vii)       Flattening Test
(viii)     Eddy Current Test
(ix)        Hydrostatic test
(x)          Pneumatic test
(xi)        Hydrogen Embrittlement test
(xii)       Residue test  
 

Mandate for ISI Mark Certification of Wrought Copper Tubes for Refrigeration and Air Conditioning:

  • Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Commerce and Industry after consulting the Bureau of Indian Standards has issued the Quality control order.
  • As per the Quality control order, all the manufacturers of Wrought Copper Tubes for Refrigeration and Air Conditioning are obligated to obtain ISI Mark Certification.
 

Types of Wrought Copper Tubes for Refrigeration and Air Conditioning covered under IS 10773        

“Licence is granted to use Standard Mark on Wrought Copper Tubes for Refrigeration and Air Conditioning as per IS 10773:1985”

Types / Scope of license

Grade – 1/2

Condition –  Soft Annealed, Light Annealed, Light Drawn

Size - Outside Diameter from …xx…mm to up to and including ….xx… mm, Wall Thickness from ….xx…mm to up to and including ….xx… mm

Process of Wrought Copper Tubes Licensing

The process can be undertaken and certified for the Indian manufacturer and for the foreign manufacturers: 

 

Requirements to get the BIS license for Wrought Copper Tubes for Refrigeration and Air Conditioning

  • Conformity of Raw Material as per IS 10773
  • In-house testing laboratory for mandatory tests
  • Competent Quality Control Personnel
  • Adherence to the BIS guidelines for Wrought Copper Tubes for Refrigeration and Air Conditioning  as per Indian standard IS 10773
  • There are 3 major categories of documents required to get the BIS license:
a.   Administrative Details
b.   Technical Details
c.    Quality Control Personnel Details
d.   Commercial Details
 

Cost of ISI mark Certificate for Wrought Copper Tubes

Expenses involved in obtaining BIS certificate for Wrought Copper Tubes for Refrigeration and Air Conditioning as per IS 10773 under the Product Certification (Scheme-I) of BIS :
 

S No.

Particular

Amount (INR)

Remarks

1.

Application Fee

1000 

To be paid directly to BIS 

2.

Audit Fee

7000

To be paid directly to BIS 

3.

License Fee

1000

To be paid directly to BIS 

4.

Sample Testing Fee

As Applicable

To be paid directly to BIS (Testing charges vary from product to product and lab to lab.)

5.

Minimum Advance Marking Fee

As per actual

To be paid directly to BIS (Marking fee varies as per Indian Standard)

6.

Renewal Fee

1000

To be paid directly to BIS 

7.

Inclusion Fee

5000

To be paid directly to BIS 

8.

ERCS Pvt Ltd Service Fee

Please contact info@elitasrcs.com
 

Remarks

Including all the taxes
  • In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
  • For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
  • Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.
 

Role of ERCS Private Limited in getting your product certified :

To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.

ERCS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.

 

Scope of work by ERCS Private Limited:

a.     Ensuring the conformity of your product as per IS 10773:
ERCS Pvt. Ltd. has developed a vast network within the Copper Industry various BIS departments to assist for ensuring conformity of the product Wrought Copper Tubes for Refrigeration and Air Conditioning according to IS 10773.
 
b.     Effective documentation with the awareness of the BIS guidelines:
In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 450 projects and technically competent acquaintances in various Industries.
 
We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.
 
c.      A pre-visit can be paid at your factory premises:
In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.
 
d.     Assistance for BIS audits:
We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.
 

Benefits of Wrought Copper Tubes for Refrigeration and Air Conditioning Certification under BIS

Advantages of getting ISI Mark for Wrought Copper Tubes for Refrigeration and Air Conditioning to sell in Indian Market with our help
  • The term “ISI mark" means, that a certain product conforms to the quality standards set up by the government.
  • It is compulsory for Wrought Copper Tubes for Refrigeration and Air Conditioning to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.
  • Getting certification improves the probability of your product to survive and compete in the market.
  • Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.
  • With the word of mouth of such client list, you can establish your credibility in the market.
  • Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.
Need Compliance Help?

Fill out the form below and one of our regulatory experts will contact you shortly.