Mandatory
Rubber Gaskets for Pressure Cookers IS 7466
IS 7466Rubber Gaskets for Pressure Cookers
Introduction to Indian Standard IS 7466 covers Rubber Gaskets for Pressure Cookers. This standard specifies the manufacturing, chemical and physical requirements and testing of Rubber Gaskets for Pressure Cookers. Raw Material should conform to the requirements as specified in Cl. 4.1 of IS 7466
Specification of IS 7466
IS 7466 specifies the quality parameters or characteristics of the Rubber Gaskets for Pressure Cookers as follows
(i) Material
(ii) Dimensions
(iii) Hardness
(iv) Tensile Strength
(v) Elongation Break
(vi) Ageing in Air Oven
(vii) Change in Volume
(viii) Discoloration
(ix) Odour and Test
(x) Volatile Matter
(xi) Permissible levels of heavy Metals in gasket
(xii) Performance Test
Is the ISI Mark Mandatory for Rubber Gaskets for Pressure Cookers (IS 7466) :
Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Commerce and Industry, Department for Promotion of Industry and Internal Trade after consulting the Bureau of Indian Standards has issued the Quality control order. As per the Quality control order, all the manufacturers of Rubber Gaskets for Pressure Cookers are obligated to obtain ISI Mark Certification.
Types of Rubber Gaskets for Pressure Cookers covered under IS 7466
|
“Licence is granted to use Standard Mark on Rubber Gaskets for Pressure Cookers as per IS 7466:2023”. |
|
|
Types / Scope of license |
Type – Gasket made of Nitrile rubber/ Silicone rubber Lid Type of Pressure Cooker – Inner Lid Type or Outer Lid Type or both as applicable Size - |
Process of ISI Certification for IS 7466
Procedure to obtain BIS Certification of Rubber Gaskets for Pressure Cookers to use ISI mark as per IS 7466
BIS Certification India for Indian Manufacturers (Standard Timeframe – 30 days)
BIS FMCS Certification for Foreign Manufacturers (Standard Timeframe – 180 days)
Requirements to get the BIS license for Rubber Gaskets for Pressure Cookers
- Conformity of Raw Material as per IS 7466
- In-house testing laboratory for mandatory tests
- Competent Quality Control Personnel
- Adherence to the BIS guidelines for Rubber Gaskets for Pressure Cookers as per Indian standard IS 7466
There are 3 major categories of document required to get the BIS license:
a. Administrative Details
b. Technical Details
c. Quality Control Personnel Details
d. Commercial Details
ISI/BIS Certificate Cost for Rubber Gaskets for Pressure Cookers
Expenses involved in obtaining BIS certificate for Rubber Gaskets for Pressure Cookers as per IS 7466 under the Product Certification (Scheme-I) of BIS :
|
COST FOR BIS REGISTRATION / ELECTRONICS PRODUCTS (Government Costs) |
|||
|
Type of Fee |
New Application |
Renewal |
Inclusion |
|
Application Fee |
1000 |
1000 |
1000 |
|
Processing Fee* |
25,000x2 = 50,000 |
25,000x2 = 50,000 |
15,000x2= 30,000 |
|
Registration Fee* |
1000 x 2 = 2000 |
1000 x 2 = 2000 |
1000 x 2 = 2000 |
|
Total |
53,000 |
53,000 |
30,000 |
|
Note* 1. The processing fee and registration fee need to be paid within 2 years, as registration numbers will be granted initially for two years. 2. The cost of BIS registration will depend on the following factors: · Location and Name of the Manufacturing Process (Overseas/ Domestic) · Types of Products and model quantity · Testing fee for the products · Govt. Fee (BIS) and ERCS Service fee |
|||
- In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
- For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
- Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.
Role of ERCS Private Limited in getting your product certified :
To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards. ERCS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.
Scope of work by ECRS Private Limited:
a. Ensuring the conformity of your product as per IS 7466:
ERCS Pvt. Ltd. has developed a vast network within the Kitchen Appliances Industry and in BIS departments to assist for ensuring conformity of the product Rubber Gaskets for Pressure Cookers according to IS 7466.
b. Effective documentation with the awareness of the BIS guidelines:
In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries.
We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.
c. A pre-visit can be paid at your factory premises:
In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.
d. Assistance for BIS audits:
We will explain the whole procedure of conducting a BIS inspection and make you aware of the things that need to be prepared and readily available at the time of inspection.
Benefits of ISI Certification for IS 7466
Benefits of getting ISI Mark for Rubber Gaskets for Pressure Cookers to sell in Indian Market with our help
- The term “ISI mark" means, that a certain product conforms to the quality standards set up by the government.
- It is compulsory for Rubber Gaskets for Pressure Cookers to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.
- Getting certification improves the probability of your product to survive and compete in the market.
- Customers have the tendency to buy ISI-certified products as it ensured safety and standard quality. Hence, with certified products you can win the confidence and trust of the buyer.
- With the word of mouth of such a client list, you can establish your credibility in the market.
- Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.