BIS Certification for Spin Extractor IS 302 (Part 1):2024

Indian BIS certification is mandatory for spin extractors under the Safety of Household, Commercial, and Similar Electrical Appliances (Quality Control) Order 2026. As per the Indian standard IS 302 (Part 1): 2024, all domestic and foreign manufacturers must obtain the ISI mark from BIS before selling or importing into India. BIS Approval ensures the product's safety and quality under the BIS Act 2016. Companies or manufacturers must know about the latest QCO, the process and fees. 

 

To obtain an ISI Mark on your product, you must go through document preparation, factory audit, and lab testing. The Indian Standards under Scheme I of Schedule II provide different specifications and criteria for the manufacturing of a product. Non-compliance with your product may lead to penalties or heavy fines. 

 

Overview of Spin Extractor as per IS 302 (Part 1)

A Spin Extractor, also known as a centrifugal dryer, is a high-speed machine that helps in separating fluids used in washing machines for dewatering fabrics by extracting excess water mainly present in households, commercial laundries and hotels, to decrease the moisture content by reducing energy consumption, drying time, and by reducing manual work. Inverter control systems perfectly utilise these appliances for variable speed and automatic braking after drying the clothes. As per IS 302 Part 1, aligned with IEC 60335-1 Spin Extractors, must be registered with BIS Certification India.

 

Key Highlights of IS 302 (Part 1/IEC 60335-1)

IS 302 (Part 1/ IEC 60335-1) is an Indian safety standard rule applicable to the Spin Extractor. It ensures the machines are safe to use in households and commercial areas. Some of the important points are explained below:-   

• Scope as per standard: This standard applies to the Spin Extractor to ensure it does not exceed its load capacity and that its rated voltage is approximately 250V, including the 5 kg / 50 m/s parameters and commercial laundry exclusion. 
• Proper Insulation: This ensures that all internal wiring is fully insulated and that appliances are designed to prevent current leakage or electrical hazards.
• Performance under certain conditions: The appliance is tested across various categories to ensure proper operation during voltage changes and during extended use.
• Heat and Fire Safety: Importers must verify that their product will not overheat, is heat-resistant, and is safe for use.
• Quality and strength: This ensures the product performs well in normal use and does not break or fail easily.

 

Benefits of BIS Certification for Spin Extractor ISI mark

BIS-registered products get several advantages for manufacturers and help in getting recognition in the Indian market, including:

• Access to the Indian market - BIS-approved appliances receive early market access, ensuring smooth entry into the competitive industry, as BIS Certification is mandatory for product legality.
• Builds customer trust- It's proven that certified products attract customers more easily, as they build trust and a relationship with customers.
• Mandatory legal compliance- compliance that adheres to applicable Indian standards to ensure national safety, quality standards and reliability.
• Reduced risk- It ensures that products must meet Indian consumer protection standards to avoid electrical, fire, and mechanical hazards.

 

Documentation Required for ISI Mark for Spin Extractor (Part 1)

The important documents needed for getting your products registered with BIS under IS 302 Part-1 are given:

• Business registration details
• Product specification details
• Factory layout and process flow chart
• Authorization letter
• Trade mark and ISO certificate
• Authorised Indian Representative (AIR) Details
• Test reports and sample details from BIS-recognised laboratories
• User manual with installation and operating instructions.

 

Important Test Parameters for Spin Extractor IS 302 (Part 1)

Various essential safety tests are required for the Spin Extractor to get BIS-approved certification in India:
Electrical and safety test -This ensures the product is tested and verified for insulation and heat resistance. The product is constructed with proper insulation to prevent current leakage.

• Mechanical stability- It runs a critical safety test to ensure stability during operations and prevent excessive vibration.
• Operational Performance - Check whether your product is heat- and fire-resistant, and ensure safe braking time limits.
• Component constructions- Check for adequate insulation and protection against abrasion.

 

Process of BIS Certification For Spin Extractor

BIS licensing for Spin Extractor is mandatory under the Bureau of Indian Standards' product certification scheme 1, as per IS 302. The process involves certain crucial steps:-

• Foreign manufacturers must appoint an Authorised Indian Representative (AIR). 
• Manufacturers and importers must submit an application form via the BIS online portal.
• Check for the required documentation and prepare it accordingly, including factory details, test reports and other manufacturing details.
• It is necessary to send the product sample for lab testing to ensure mechanical strength, heat resistance, and current leakage in the appliances, to be conducted by a BIS-authorised laboratory.
• A BIS official or an independent person will visit your manufacturing unit to verify your quality control system and production capabilities. 
• The final step, after reviewing your documents and verifying your samples' lab test reports, the BIS will grant you a license allowing you to use the ISI logo on the Spin Extractor.

 

Both Indian and foreign manufacturers must follow the process to obtain BIS certification:

• ISI Mark Certification Process for Indian Manufacturers
• ISI Mark Certification Process for Foreign Manufacturers

 

BIS Certification Fees and Timeline 

The cost and fees for appliances may vary depending on the product classification and testing complexity. For understanding the Spin Extractor certification cost structure and testing fees, consult your most trusted compliance ERCS Private Limited. Our team of experts, ISI mark consultants, will help you enter the Indian market steadily.

 

The approximate time for foreign and domestic manufacturers to obtain the BIS Certification:

• Foreign Manufacturers-120-180 days(Standard timeline)
• Domestic Manufacturers-30-45 days(Standard timeline)

 

Reasons to Partner with ERCS for BIS licensing for Household & Electrical Appliances

BIS certification is a strategic step for every manufacturer looking to sell their product in the Indian market and establish their position in this competitive, fastest-growing industry. ERCS PRIVATE LIMITED helps you to achieve all these crucial verification goals.

• ERCS serves as a one-stop solution for all your verification needs.
• To simplify your product certification journey, from application submission to final approvals, we ensure a smooth, hassle-free entry into the Indian market.
• We help our customers obtain BIS certification easily by providing comprehensive support, including product testing through accredited BIS labs.
• ERCS is a regulatory compliance consultancy that helps you accelerate verification and gain a competitive edge.
• Our team of experienced, expert executives makes BIS certification easy by guiding you through the process. We have completed 1500+ BIS certification projects.
• We assist both Indian and foreign manufacturers in meeting all the criteria for selling, importing and manufacturing their products into the Indian market.

 

Need help in navigating the BIS certification for Spin Extractor? Consult a BIS-recognised compliance expert for end-to-end application support.

 

FAQs

Q1. What is IS 302 (Part 1)? 

Ans: IS 302 Part 1 is an Indian standard that specifies the safety requirements for household and commercial electrical appliances and is aligned with IEC 60335-1.

 

Q2.Is BIS certification mandatory for these appliances? 

Ans: Yes, BIS certification is mandatory for an appliance before being sold or manufactured in India under the Household Commercial and similar electrical appliances Quality Control Order, 2026.  

 

Q3. What are the voltage limits covered under this standard? 

Ans: All appliances covered under IS 302 Part 1 must be within the 250V voltage limit for single-phase AC.

 

Q4. How long does the certification process take?

Ans: The Certification process takes approximately 30 days for Indian manufacturers and 180 days for foreign manufacturers, varying based on documentation, inspection, and approval processes.

 

Q5.Can foreign manufacturers apply for BIS certification?

Ans: Yes, foreign manufacturers must appoint an Authorised Indian Representative (AIR) for BIS compliance