BIS Certification for Electric Grain Grinders not exceeding 3l hopper capacity IS 302 Part 1 IEC 60335
Category: BIS Certification
BIS Certification for Electric Grain grinders with a 3I hopper capacity or less is mandatory for manufacturers and importers aiming to sell safe, quality products in India to ensure product compliance. The Bureau of Indian Standards (BIS) mandates certification in accordance with IS 302 Part 1. This certification verifies that appliances must meet strict safety, performance and quality standards before being sold in India. To ensure safety, reliability, and protection against electrical, mechanical, and thermal hazards in electric grain grinders used in household and similar environments to safeguard their users and ensure uniform product safety standards in India.
Electric Grain Grinders (≤3l) under IS 302 Part 1 Under Scheme 1
Electric Grain Grinders are kitchen appliances that turn grains such as wheat, rice, millet, and corn into fine, fresh flour. These machines usually come with a container hopper that can hold up to 3 litres of grain at once. They are commonly used for making flour for chapatis, breads, dosa batter, and other homemade food products.
Electric grain grinders with a hopper capacity not exceeding 3L have been subject to mandatory requirements under the Safety of Household, Commercial, and Similar Electrical Appliances Quality Control Order (QCO), 2026, for Small enterprises, effective 19 June 2026, and for Micro enterprises, effective 19 September 2026.
Key Highlights for IS 302 (Part 1) for Electric Grain Grinders (≤3L)
|
S no. |
Parameteres |
Requirements |
|---|---|---|
|
1. |
Applicable Indian Standard |
IS 302 Part 1 is aligned with IEC 60335-1 General Requirements |
|
2. |
Operating Voltage |
230 V AC for singel phase 50 Hz |
|
3. |
Hopper Capacity |
hopper capacity (≤3L) |
|
4. |
Temperature Limits |
The motor and electrical components of grinders must not exceed heat-rise limits during continuous grinding operations. |
|
5. |
Insulation |
The appliance must withstand high-voltage dielectric strength to prevent electric shocks. |
Benefits of BIS Certification for Electric Grain Grinders
Obtaining BIS certification under IS 302 Part 1/IEC 60335-1 has legal advantages:
- Legal compliance: It is mandatory under the QCO products; without the BIS mark, they cannot be manufactured or sold in India after the enforcement deadlines above.
- Market access: The ISI mark is widely recognised by Indian distributors, retailers, and buyers, thereby ensuring quality requirements are met.
- Build Consumer trust: ISI-marked products signal verified safety compliance, reducing warranty claims and post-sale liability.
- Competitive advantage: Early certification for your product can help you get ahead of competitors who may miss mandatory deadlines.
- Reduced Risk of Penalties: It protects businesses from product seizures, hefty fines, or legal action under the BIS Act, 2016
Documents required for Electric Grain Grinders (≤3L) Certification
Here is the list of documents required as per IS 302 Part 1/IEC 60335-1:
- Company registration proof
- ID proof of authorised signatory
- Nomination form for Authorised Indian Representative (AIR)
- Test reports from a BIS-recognised laboratory
- Factory layout plan
- Trademark certificate
- Manufacturing licence (if applicable)
- Product technical specification details
Applicable Test Parameters for Electric Grain Grinders (≤3L) IS 302 (Part 1)
Electric Grain Grinders require various electrical and performance tests under IS 302 Part 1/IEC 60335-1which are classified into:
- Electrical Safety Tests: Users must be protected from live electrical parts, and the grain grinders must operate safely, without exposing users to electrical hazards.
- Mechanical Safety Tests: The appliance must have a consistent structure between the main housing and hoppers to protect against electrical damage through wear and tear.
- Marking Checks: This test includes the examination of creepage distance, clearances, and durability of marks and labels.
- Performance Tests: The performance test is conducted to verify proper operation.
- Moisture Resistance: Grain grinders must withstand moisture during regular operation.
Step-by-step IS 302 Part 1 2024 certification process
The following steps include:
Step 1: Application Submission: Manufacturers must apply online via the BIS ManakOnline portal, upload all required documents, test reports, and pay the BIS fees.
Step 2: Document Preparation: Collect all important company documents, including manufacturing details, the quality control manual, and trademark certificates.
Step 3: Factory Inspection: A BIS officer will visit the factory to check the manufacturing units' processes and quality control systems.
Step 4: Product Testing: Send 3-5 product samples to a BIS-approved laboratory to verify compliance with the required safety standards.
Step 5: Grant of License: After successful verification, BIS will issue the license and allow the use of the ISI Mark on the product.
For full Procedure details on the BIS ISI certification process in India:
- BIS Certification Procedure for Domestic Manufacturers
- BIS Certification Procedure for Foreign Manufacturers
Cost of BIS Certification under IS 302 Part 1
All fees below are paid directly to the Bureau of Indian Standards as per IS 302 (Part 1): IEC 60335-1 includes:
|
S. No |
Particular |
Amount (INR) |
Remarks |
|
1. |
Application Fee |
1000 |
To be paid directly to BIS |
|
2. |
Audit Fee |
7000 |
To be paid directly to BIS |
|
3. |
License Fee |
1000 |
To be paid directly to BIS |
|
4. |
Sample Testing Fee |
As Applicable |
To be paid directly to BIS (Testing charges vary from product to product and lab to lab.) |
|
5. |
Minimum Advance Marking Fee |
As per actual |
To be paid directly to BIS (Marking fee varies as per Indian Standard) |
|
6. |
Renewal Fee |
1000 |
To be paid directly to BIS |
|
7. |
Inclusion Fee |
5000 |
To be paid directly to BIS |
|
8. |
ERCS Pvt Ltd Service Fee |
Contact info@elitasrcs.com |
|
Validity Period & How to Renew BIS License
- Under Scheme I (ISI Mark Scheme), the BIS licence for Electric Grain Grinders is granted for an initial period of 1 to 2 years, depending on the BIS approval of your online renewal application.
- Initiate renewal at least 30 days before the expiry date
- Re-testing against IS 302 Part 1 / IEC 60335-1 may be required
Role of ERCS Private Limited
- ERCS Private Limited is a professional and reliable organisation with experienced and dedicated Consultants
- ERCS offers end-to-end regulatory compliance solutions, including BIS, ISI, FMCS, WPC, BEE, and EPR.
- We assist both Domestic and foreign manufacturers in obtaining BIS Certification for Electric Grain Grinders by providing end-to-end support from documentation to final approval.
- 5+ years of BIS certification expertise across electrical and household appliance categories
- We have completed 1500+ projects across 30+ locations.
FAQs
Q1.Is BIS Certification mandatory for Electric Grain Grinders?
Ans: Yes. From 19 March 2026, certification is mandatory under QCO 2026.
Q2.What is an Authorised Indian Representative (AIR) and do I need one?
Ans: An AIR Authorised Indian Representative is a legally appointed Indian who is responsible for BIS compliance on behalf of a foreign manufacturer.
Q3.What is the hopper capacity covered under QCO?
Ans: Grain grinders with a hopper capacity of up to 3 litres are covered under QCO.
Q4.What is BIS certification for electronic products?
Ans: BIS certification for electronic products is a mandatory requirement issued by the Bureau of Indian Standards (BIS) in India to ensure quality and safety.
Q5. What are the penalties for non-compliance?
Ans: Penalties for non-compliance include fines, imprisonment, and product seizure under the BIS Act, 2016.