ISI Certification (BIS) for GEOTEXTILES USED IN SUBSURFACE DRAINAGE APPLICATION IS 16393

BIS CERTIFICATION FOR GEOTEXTILES USED IN SUBSURFACE DRAINAGE APPLICATION IS 16393 : 2015

In drainage, the geotextiles act as a conduit for liquids or gases. For under-drains constructed along pavements, the gravel-filled trenches lined with geotextiles allow water to drain into the trenches and separates or restricts soil materials.

Introduction to Indian Standard IS 16393 : 2015;  Geotextiles used in Subsurface Drainage Application

·       IS 16393 : 2015 cover  Geotextiles used in Subsurface Drainage Application. This standard specifies requirements for two classes of geotextiles used in drainage application such as subgrade dewatering, road base drainage and structure drainage by placing the geotextile against the soil to allow long-term passage of water into a subsurface drain system retaining the in-situ soil.

Class 1 geotextiles are for applications where applied stresses are more severe, that is, very coarse shape angular aggregate is used, compaction is greater than 95 percent of maximum density as per IS 2720 (Part 15) or depth of trench is greater than 300 mm.

Class 2 geotextiles are suitable for drainage applications which are less severe, that is, smooth graded surfaces having no sharp angular aggregate, compaction is less than or equal to 95 percent of maximum density as per IS 2720 (Part 15).

Woven slit film geotextiles (that is, geotextiles made from yarns of a flat, tape-like character) shall not be used.

·       IS 16393 : 2015 specifies the quality parameters or characteristics of the  Geotextiles used in Subsurface Drainage Application as follows :

(i)           Type of geotextile

(ii)         Roll Length

(iii)        Roll Width

(iv)        Grab Strength      

(v)          Burst Strength

(vi)        CBR Puncture Strength

(vii)       Packing

(viii)     Permittivity

(ix)        Apparent Opening Size

(x)          Packing

(xi)        Ultraviolet Stability at 500h, Retained strength, percent of original strength

1.   Mandate for ISI Mark Certification of Geotextiles used in Subsurface Drainage Application (IS 16393 : 2015)

·       In exercise of the powers conferred by sub-sections (1) and (2) of section 16 read with section 17 and sub-section (3) of section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government is of the opinion that it is necessary so to do in the public interest and after consulting the Bureau of Indian Standards, hereby makes the following Order, namely

Geo Textiles (Quality Control) Order, 2022.

·       As per the Geo Textiles (Quality control) order, all the manufacturers of Geotextiles used in Subsurface Drainage Application are obligated to obtain ISI Mark Certification.

    3.   Procedure to obtain BIS Certification of  Geotextiles used in Subsurface Drainage Application to use ISI mark as per IS 16393 : 2015

·       For Indian Manufacturers (Standard Timeframe – 30 days)

·       For Foreign Manufacturers (Standard Timeframe – 180 days)

·       Requisites to get the BIS license for  Geotextiles used in Subsurface Drainage Application

·       Conformity of Raw Material as per IS 16393 : 2015

·       In-house testing laboratory for mandatory tests

·       Competent Quality Control Personnel

·       Adherence to the BIS guidelines for  Geotextiles used in Subsurface Drainage Application as per Indian standard IS 16393 : 2015

·       There are 3 major categories of document required to get the BIS license:

a.   Administrative Details

b.   Technical Details

c.    Quality Control Personnel Details

d.   Commercial Details

4.   Expenses involved in obtaining BIS certificate for  Geotextiles used in Subsurface Drainage Application as per IS 16393 : 2015 under the Product Certification (Scheme-I) of BIS :

·       In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.

·       For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.

·       Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.

5.   Role of ERCS Private Limited in getting your product certified :

·       To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.

·       ECRS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.

·       Scope of work by ECRS Private Limited:

a.     Ensuring the conformity of your product as per IS 16393 : 2015:

ERCS Pvt. Ltd. has developed a vast network within the Geotextile Industry & various BIS departments to assist for ensuring conformity of the product  Geotextiles used in Subsurface Drainage Application according to according to IS 16393 : 2015.

b.     Effective documentation with the awareness of the BIS guidelines:

In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries.

We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.

c.      A pre-visit can be paid at your factory premises:

In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.

d.     Assistance for BIS audits:

We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.

Benefits of getting ISI Mark for  Geotextiles used in Subsurface Drainage Application to sell in Indian Market with our help

§  The term “ISI mark" means, that a certain product conforms to the quality standards set up by the government.

§  It is compulsory for  Geotextiles used in Subsurface Drainage Application to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.

§  Getting certification improves the probability of your product to survive and compete in the market.

§  Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.

§  With the word of mouth of such client list, you can establish your credibility in the market.

§  Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.