BIS Certification for
Multi-Burner Oil Pressure Stoves IS 2787:2006

BIS CERTIFICATION OF MULTI-BURNER OIL PRESSURE STOVES IS 2787:2006

A pressurized stove has a fuel tank, multiple burner and a pot holder. Vaporized fuel is passed under pressure through a nozzle and mixes with air to form a flame.

Multi-Burner Oil Pressure Stoves is used in the following areas –

• Cooking purpose

Introduction to Indian Standard IS 2787; Multi-Burner Oil Pressure Stoves

• IS 2787 cover Multi-Burner Oil Pressure Stoves. This standard covers the requirements and tests for four types of oil pressure heaters, burning pressurized kerosene oil under a normal working pressure not exceeding 200 kN/mm2 (2 kgf/cm2).
• IS 2787 specifies the quality parameters or characteristics of the Multi-Burner Oil Pressure Stoves as follows

Air Pressure Test

Safety Pressure Test

Bursting Pressure Test

Thermal Efficiency

Combustion Efficiency

Fuel Creep

Resistance to Draught

Surface Temperature

For more info on the product standardization click here

Mandate for ISI Mark Certification of Multi-Burner Oil Pressure Stoves (IS 2787) :

• Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry Industry, Department Industrial Policy and Policy and Promotion in exercise of the powers conferred by section 3 of the Essential Commodities Act after consulting the Bureau of Indian Standards has issued the Oil Pressure Stoves (Quality control) order, 1997.
• As per this order, allthe manufacturers of Multi-Burner Oil Pressure Stoves are obligated to obtain ISI Mark Certification.

Types of Multi Burner Oil Pressure Stoves covered under IS 2787

“Licence is granted to use Standard Mark on Multi-Burner Oil Pressure Stoves as per IS 2787: 2006”.
Types / Grades	Multi Burner Oil Pressure Stoves

Procedure to obtain BIS Certification of Multi-Burner Oil Pressure Stoves to use ISI mark as per IS 2787

For Indian Manufacturers (Standard Timeframe – 30 days) click here

For Foreign Manufacturers (Standard Timeframe – 180 days)click here

Requisites to get the BIS license for Multi-Burner Oil Pressure Stoves

Conformity of Raw Material as per IS 2787

In-house testing laboratory for mandatory tests

Competent Quality Control Personnel

Adherence to the BIS guidelines for Multi-Burner Oil Pressure as per Indian standard IS 2787

There are 3 major categories of document required to get the BIS license:

Administrative Details

Technical Details

Quality Control Personnel Details 

Commercial Details

Expenses involved in obtaining BIS certificate for Multi-Burner Oil Pressure Stoves as per IS 2787 under the Product Certification (Scheme-I) of BIS :

 

For Indian Manufacturers
No.	Major Charges		Amount	Remark
1.	BIS Fee	Application Fees	INR 1000	To be paid in BIS A/c directly. 20% rebate on Marking Fee for MSME units.
		Audit Charges	INR 7000
		License Fee	INR 1000
		Marking Fee	Not Defined
2.	Testing Charges	Sample Test Fee	As Applicable	To be paid into BIS approved Lab A/c
3.	ERCS Service Fee	Consultancy & others	As per actual, (Depending upon the product and the region of factory)

For the Foreign Manufacturers
No.	Major Charges	Particulars	Amount	Remark
1.	BIS Fee	Application Fees	USD 30	To be paid into BIS A/c directly in USD (SWIFT). SAARC countries can pay in INR with GST@18%
		Audit Charges (consolidated)	USD 3200 to USD 5900
		License Fee	USD 30
		Marking Fee	Not Defined
2.	Testing Charges	Sample Test Fee	As applicable	To be paid into BIS approved Lab A/c
3.	ERCS Service Fee	Consultancy & other charges	As per actual, (Depending upon the product and the location of mfg.)

• In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
• For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
• Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.

Role of ERCS Private Limited in getting your product certified :

• To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.
• ECRS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.

• Scope of work by ECRS Private Limited:

Ensuring the conformity of your product as per IS 2787:

ERCS Pvt. Ltd. has developed a vast network within the Oil Pressure Stoves Industry & various BIS departments to assist for ensuring conformity of the product Multi-Burner Oil Pressure Stoves according to according to IS 2787.

Effective documentation with the awareness of the BIS guidelines:

In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries.

We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.

A pre-visit can be paid at your factory premises:

In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.

Assistance for BIS audits:

We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.

Benefits of getting ISI Mark for Multi-Burner Oil Pressure Stoves to sell in Indian Market with our help

• The term “ISI mark" means, that a certain product conforms to the quality standards set up by the government.
• It is compulsory for Multi-Burner Oil Pressure Stoves to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.
• Getting certification improves the probability of your product to survive and compete in the market.
• Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.
• With the word of mouth of such client list, you can establish your credibility in the market.
• Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.