Mandatory
Wooden Flush Door Shutters Solid Core Type IS 2202 Part-2
Introduction to Indian Standard IS 2202 Part 2; Wooden Flush Door Shutters (Solid Core Type) – Particle Board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panel
IS 2202 Part 2 covers Wooden Flush Door Shutters (Solid Core Type) – Particle Board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panel. This standard specifies the manufacturing, chemical and physical requirements and testing of Wooden Flush Door Shutters (Solid Core Type) – Particle Board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panel.
Specification of IS 2202 Part 2 under BIS Scheme-I
IS 2202 Part 2 specifies the quality parameters or characteristics of the Wooden Flush Door Shutters (Solid Core Type) – Particle Board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panel as follows
(i) Timber
(ii) Adhesive
(iii) Face Veneers
(iv) Impact Indentation test
(v) Local Planeness Test
(vi) General Flatness test
(vii) Dimension and squarness
(viii) Flexural test
(ix) Edge Loading Test
(x) Shocking Resistance Test
(xi) Slamming Test
(xii) Misuse test
(xiii) End Emersion test
(xiv) Glue Adhesion test
(xv) Buckling Test
Mandate for ISI Mark Certification of Wooden Flush Door Shutters (Solid Core Type)
- Under section 14 of the Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Commerce and Industry, Department for Promotion of Industry and Internal Trade, after consulting the Bureau of Indian Standards, has issued the Quality control order.
- As per the Quality control order, all the manufacturers of Wooden Flush Door Shutters (Solid Core Type) – Particle Board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panel are obligated to obtain ISI Mark Certification.
Types of Wooden Flush Door Shutters (Solid Core Type) IS 2202 Part 2
|
“Licence is granted to use Standard Mark on Wooden Flush Door Shutters (Solid Core Type) – Particle Board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panel as per IS 2202 Part 2:2022”. |
|
|
Types / Scope of license |
Grade – BWR/MR Type / Construction – Size – Modular sizes with designation of doors (8 DS 20/8 DS 21/9 DS 20/ 9 DS 21/10 DS 20/10 DS 21/12 DT 20/12 DT 21) and thickness - Non-Modular sizes with designation of doors and thickness |
ISI Certification Process for Wooden Flush Door Shutters
Procedure to obtain BIS Certification of Wooden Flush Door Shutters (Solid Core Type) – Particle Board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panel to use ISI mark as per IS 2202 Part 2
· For Indian Manufacturers (Standard Timeframe – 30 days)
· For Foreign Manufacturers (Standard Timeframe – 180 days)
BIS ISI Certification Requirements for Wooden Flush Door Shutters Solid Core Type
- Conformity of Raw Material as per IS 2202 Part 2
- In-house testing laboratory for mandatory tests
- Competent Quality Control Personnel
- Adherence to the BIS guidelines for Wooden Flush Door Shutters (Solid Core Type) – Particle Board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panel as per Indian standard IS 2202 Part 2
There are 3 major categories of document required to get the BIS license:
a. Administrative Details
b. Technical Details
c. Quality Control Personnel Details
d. Commercial Details
BIS Certification fee for Wooden Flush Door Shutters Solid Core Type
Expenses involved in obtaining BIS certificate for Wooden Flush Door Shutters (Solid Core Type) – Particle Board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panel as per IS 2202 Part 2 under the Product Certification (Scheme-I) of BIS :
|
S No. |
Particular |
Amount (INR) |
Remarks |
|
1. |
Application Fee |
1000 |
To be paid directly to BIS |
|
2. |
Audit Fee |
7000 |
To be paid directly to BIS |
|
3. |
License Fee |
1000 |
To be paid directly to BIS |
|
4. |
Sample Testing Fee |
As Applicable |
To be paid directly to BIS (Testing charges vary from product to product and lab to lab.) |
|
5. |
Minimum Advance Marking Fee |
As per the actual |
To be paid directly to BIS (Marking fee varies as per Indian Standard) |
|
6. |
Renewal Fee |
1000 |
To be paid directly to BIS |
|
7. |
Inclusion Fee |
5000 |
To be paid directly to BIS |
|
8. |
ERCS Pvt Ltd Service Fee |
Please contact info@elitasrcs.com |
|
|
Remarks |
Including all the taxes |
||
- In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
- For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
- Apart from the charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.
Role of ERCS Private Limited in getting your product certified :
- To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.
- ECRS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.
Scope of work by ECRS Private Limited:
a. Ensuring the conformity of your product as per IS 2202 Part 2:
ERCS Pvt. Ltd. has developed a vast network within the Plywood & Wooden Industry, various BIS departments to assist in ensuring conformity of the product, Wooden Flush Door Shutters (Solid Core Type) – Particle Board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panel according to IS 2202 Part 2
b. Effective documentation with the awareness of the BIS guidelines:
In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent associates in various Industries.
We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.
c. A pre-visit can be paid at your factory premises:
In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that the required changes can be adapted so as to remove the elements of fallibility.
d. Assistance for BIS audits:
We will explain the whole procedure of conducting a BIS inspection and make you aware of the things that need to be prepared and readily available at the time of inspection.
Benefits of getting ISI Mark for Wooden Flush Door Shutters, Solid Core Type
- The term “ISI mark" means that a certain product conforms to the quality standards set by the government.
- It is compulsory for Wooden Flush Door Shutters (Solid Core Type) – Particle Board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panel to obtain the ISI Mark and the violators are penalized with the material seizure and a significant sum as fine.
- Getting certification improves the probability of your product surviving and competing in the market.
- Customers have a tendency to buy ISI certified products as it ensure safety and standard quality. Hence, with the certified products, you can win the confidence and trust of the buyer.
- With the word of mouth of such a client list, you can establish your credibility in the market.
- Hence, with the renowned brand, you can raise the standard and benchmark the market value of the product.