Mandatory

BIS Certification for
Cycle and Rickshaw Tyres IS 2414

Name: ERCS Private Limited
Rating: 4.9 (61730 reviews)

IS 2414

BIS CERTIFICATION for CYCLE AND RICKSHAW TYRES as per IS 2414

Indian Standard IS 2414 covers pneumatic tyres for cycles and rickshaws, specifying the requirements for manufacturing, chemical composition, physical properties, and performance testing to ensure safety, durability, and quality. As per this standard, the raw materials used must comply with specific Indian Standards, including Grey Cotton Yarn (IS 7133), Polymeric Yarn/Nylon Fabric (IS 11573), and Bead Wire (IS 4824). Adherence to these requirements ensures consistent quality, strength, and reliable performance of cycle and rickshaw tyres in various operating conditions.

Specification of IS 11573

IS 2414 specifies the quality parameters or characteristics of the Cycle and Rickshaw pneumatic tyres as follows

(i) Dimensions

(ii) Tyre Cord

(iii) Cashing Strength

(iv) Bead Wire

(v) Breaking Load of Bead Wire Joint

(vi) Tensile Strength and Elongation

(vii) Accelerated Ageing Test

ISI Mark Certification of Cycle and Rickshaw pneumatic tyres (IS 2414) :

Under section 14 of the Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Commerce and Industry, Department for Promotion of Industry and Internal Trade, after consulting the Bureau of Indian Standards, has issued the Quality control order. As per the Quality Control Order, all manufacturers of Cycle and Rickshaw pneumatic tyres are required to obtain the ISI Mark Certification.

Types of Cycle and Rickshaw pneumatic tyres covered under IS 2414

COST FOR BIS REGISTRATION / ELECTRONICS PRODUCTS (Government Costs)
Type of Fee	New Application	Renewal	Inclusion
Application Fee	1000	1000	1000
Processing Fee*	25,000x2 = 50,000	25,000x2 = 50,000	15,000x2= 30,000
Registration Fee*	1000 x 2 = 2000	1000 x 2 = 2000	1000 x 2 = 2000
Total	53,000	53,000	30,000
Note* 1. The processing fee and registration fee need to be paid within 2 years, as registration numbers will be granted initially for two years. 2. The cost of BIS registration will depend on the following factors: · Location and Name of the Manufacturing Process (Overseas/ Domestic) · Types of Products and model quantity · Testing fee for the products · Govt. Fee (BIS) and ERCS Service fee

BIS Certification Process of Cycle and Rickshaw pneumatic tyres

Requirements of ISI Certification for IS 2414

Requirements to get the BIS license for Cycle and Rickshaw pneumatic tyres

Conformity of Raw Material as per IS 2414
In-house testing laboratory for mandatory tests
Competent Quality Control Personnel
Adherence to the BIS guidelines for Cycle and Rickshaw pneumatic tyres as per Indian standard IS 2414
There are 3 major categories of documents required to get the BIS license:

a. Administrative Details

b. Technical Details

c. Quality Control Personnel Details

d. Commercial Details

BIS ISI Certification Fee for Cycle and Rickshaw Tyres

Expenses involved in obtaining BIS certificate for Cycle and Rickshaw pneumatic tyres as per IS 2414 under the Product Certification (Scheme-I) of BIS :

S No.	Particular	Amount (INR)	Remarks
1.	Application Fee	1000	To be paid directly to BIS
2.	Audit Fee	7000	To be paid directly to BIS
3.	License Fee	1000	To be paid directly to BIS
4.	Sample Testing Fee	As Applicable	To be paid directly to BIS (Testing charges vary from product to product and lab to lab.)
5.	Minimum Advance Marking Fee	As per the actual	To be paid directly to BIS (Marking fee varies as per Indian Standard)
6.	Renewal Fee	1000	To be paid directly to BIS
7.	Inclusion Fee	5000	To be paid directly to BIS
8.	ERCS Pvt Ltd Service Fee	Please contact info@elitasrcs.com
	Remarks	Including all the taxes

In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratorie
Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.

Role of ERCS Private Limited in getting your product certified :

To obtain BIS certification and produce a standard-quality product, the manufacturer must ensure that their product complies with the specified Indian Standard Specifications (ISS), which we interpret directly for you from the BIS officials as per the Indian Standards. ERCS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.

Scope of work by ECRS Private Limited:

a. Ensuring the conformity of your product as per IS 2414:

ERCS Pvt. Ltd. has developed a vast network within the Automotive and Tyre Industry and in BIS departments to assist for ensuring conformity of the product Cycle and Rickshaw pneumatic tyres according IS 2414.

b. Effective documentation with the awareness of the BIS guidelines:

In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries.

We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.

c. A pre-visit can be paid at your factory premises:

In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.

d. Assistance for BIS audits:

We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.

BIS certification Advantage for IS 2414

Benefits of getting ISI Mark for Cycle and Rickshaw pneumatic tyres to sell in the Indian Market with our help

The term “ISI mark" means that a certain product conforms to the quality standards set up by the government.
It is compulsory for Cycle and Rickshaw pneumatic tyres to obtain the ISI Mark, and the violators are penalized with the material seize and a significant sum as fine.
Getting certification improves the probability of your product surviving and competing in the market.
Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.
With the word of mouth of such client list, you can establish your credibility in the market.
Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.

Request an Assessment

Enter your details to receive a fixed-price quotation for testing and registering this product category.

100% Secure NDA Protected

BIS Compliance

Sustainability

Telecom & Wireless

Other Compliances

Technical Audits

BIS Certification for Cycle and Rickshaw Tyres IS 2414