BIS Certification for Stranded Steel Wire Ropes for Winding and Man-Riding Haulages in Mines IS 1855

Introduction to Indian Standard IS 1855 covers Stranded Steel Wire Ropes for Winding and Man-riding Haulages in Mines. This standard specifies the manufacturing, chemical and physical requirements and testing of Stranded Steel Wire Ropes for Winding and Man-riding Haulages in Mines.

 

Product Specification of IS 1855

IS 1855 specifies the quality parameters or characteristics of the Stranded Steel Wire Ropes for Winding and Man-riding Haulages in Mines  as follows

(i)  Length 

(ii)  Approximate mass

(iii)  Lay of rope 

(iv)  Joints 

 (v)  Freedom from defects

(vi)  Diameter 

(vii)  Tensile test 

(viii) Torsion test 

(ix)  Reverse bend test

(x)  Galvanizing test 

(xi) Minimum Breaking Load 

(xii)  Adhesion Test 

(xiii)   Wrapping Test

(xiv) Lubrication

 

Mandate for ISI Mark Certification of Stranded Steel Wire Ropes for Winding and Man-riding Haulages in Mines   (IS 1855) :

• Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Commerce and Industry after consulting the Bureau of Indian Standards has issued the Quality control order.
• As per the Quality control order, all the manufacturers of Stranded Steel Wire Ropes for Winding and Man-riding Haulages in Mines are obligated to obtain ISI Mark Certification.

Procedure to obtain BIS Certification of Stranded Steel Wire Ropes for Winding and Man-riding Haulages in Mines , Large Open Top to use ISI mark as per IS 1855

• BIS Mark Certification Procedure for Indian Manufacturers
• BIS Mark Certification Procedure for Foreign Manufacturers

 

Requirements to get the BIS license for Stranded Steel Wire Ropes for Winding and Man-riding Haulages in Mines  

·       Conformity of Raw Material as per IS 1855

·       In-house testing laboratory for mandatory tests

·       Competent Quality Control Personnel 

·       Adherence to the BIS guidelines for Stranded Steel Wire Ropes for Winding and Man-riding Haulages in Mines   as per Indian standard IS 1855

·       There are 3 major categories of document required to get the BIS license:

a.   Administrative Details

b.   Technical Details

c.    Quality Control Personnel Details 

d.   Commercial Details

 

ISI Certification Fee Structure of  IS 1855 Certification under BIS Scheme-I

Expenses involved in obtaining BIS certificate for Stranded Steel Wire Ropes for Winding and Man-riding Haulages in Mines  as per IS 1855 under the Product Certification (Scheme-I) of BIS :

S No.	Particular	Amount (INR)	Remarks
1.	Application Fee	1000	To be paid directly to BIS
2.	Audit Fee	7000	To be paid directly to BIS
3.	License Fee	1000	To be paid directly to BIS
4.	Sample Testing Fee	As Applicable	To be paid directly to BIS (Testing charges vary from product to product and lab to lab.)
5.	Minimum Advance Marking Fee	As per the actual	To be paid directly to BIS (Marking fee varies as per Indian Standard)
6.	Renewal Fee	1000	To be paid directly to BIS
7.	Inclusion Fee	5000	To be paid directly to BIS
8.	ERCS Pvt Ltd Service Fee	Please contact info@elitasrcs.com
	Remarks	Including all the taxes

·     In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.

·       For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.

·       Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.

 

Role of ERCS Private Limited in getting your product certified :

To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards. ERCS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.

 

·       Scope of work by ERCS Private Limited:

a.     Ensuring the conformity of your product as per IS 1855:

ERCS Pvt. Ltd. has developed a vast network within the Steel Wire and Strand  Industry various BIS departments to assist for ensuring conformity of the product Stranded Steel Wire Ropes for Winding and Man-riding Haulages in Mines  according to IS 1855. 

 

b.     Effective documentation with the awareness of the BIS guidelines:

In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 450 projects and technically competent acquaintances in various Industries. 

We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.

 

c.      A pre-visit can be paid at your factory premises:

In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.

 

d.     Assistance for BIS audits: 

We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.

 

Benefits of getting ISI Mark for Stranded Steel Wire Ropes for Winding and Man-riding Haulages in Mines  to sell in Indian Market with our help

• The term “ISI mark" means, that a certain product conforms to the quality standards set up by the government.
• It is compulsory for Stranded Steel Wire Ropes for Winding and Man-riding Haulages in Mines  to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.
• Getting certification improves the probability of your product to survive and compete in the market.
• Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.
• With the word of mouth of such client list, you can establish your credibility in the market.
• Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.