BIS Certification for
Fabric Steamer
IS 302 (Part 1): 2024
The BIS Certification for Fabric Steamer is mandatory under the Safety of Household, Commercial and Similar Electrical Appliances Quality Control Order (QCO). These products must comply with the quality and safety standards specified in IS 302 Part 1: 2024/IEC 60335-1 to be legally manufactured, sold, or imported in the Indian Market. The BIS has set the final implementation deadline of 1st October for General Manufacturers and Importers, 1st January for Small Enterprises, and 1st April for Micro Enterprises.
Fabric steamers are generally electric devices that remove wrinkles from clothes using steam. Since these devices operate on electricity and produce heat and steam, it is vital to ensure their safety and quality. To protect consumers from electrical hazards, including electric shock, fire, and overheating, fabric steamers must comply with the safety requirements set by applicable Indian laws. BIS Certification under IS 302 Part 1:2024 specifies the basic safety requirements for domestic and similar electrical appliances, including fabric steamers.
What are Fabric Steamers under IS 302 Part 1: 2024/IEC 60335-1?
Fabric steamers are electrical household and commercial appliances designed to remove wrinkles and creases from clothes, curtains, and upholstery using heated steam. IS 302 Part 1: 2024 / IEC 60335-1, fabric steamers are categorised as regulated electrical appliances that must meet strict general safety, thermal, and electrical performance requirements.
Testing Parameters for Fabric Steamers IS 302 Part 1: 2024/IEC 60335-1
Testing Fabric Steamers under IS 302 (Part 1): 2024 / IEC 60335-1 involves rigorous safety requirements, including protection against electric shock, protection against abnormal operation, moisture resistance, and insulation testing. The essential testing parameters include the following verifications:
- Electric Shock Protection: Prevents the user from coming into contact with live components of the electrical appliance. The electric components exposed to users are tested using several standard test probes, including a finger probe.
- Current and Input Power: Current and voltage are measured during normal use as part of testing to ensure the accepted value remains within ±20% of the normal value.
- Temperature and Heat Production: The appliance is operated in a controlled testing environment to analyse the internal conditions.
- Water Resistance: During water steam generation, many problems can arise, leading to a fire hazard or even heat damage.
- Electric Strength and Leakage Current: Measured during device operation. High Voltage (HV) Testing is used to determine how robust a device is under high voltage.
- Test for Abnormal Operation: It was determined that fabric steamers can run out of water. The testers will use the device without water to check whether the appliance is safe and poses no fire risk.
List of Documents Required for ISI Mark Certification of Fabric Steamer
Before applying for the ISI Mark, make sure all required documents are prepared and readily available. Check the list of documents needed for BIS certification of Fabric Steamer below.
BIS Certification Process for Fabric Steamer in India
Both Indian and foreign manufacturers must follow the certification process to obtain the ISI Mark on their Fabric Steamer:
- BIS Certification Process for Indian Manufacturers
- BIS Certification Process for Foreign Manufacturers
BIS Certification Cost for Fabric Steamer (2026)
Below, you can go through the table for the BIS Certification cost of the Fabric Steamer:
|
S No. |
Particular |
Amount (INR) |
Remarks |
|
1. |
Application Fee |
1000 |
To be paid directly to BIS |
|
2. |
Audit Fee |
7000 |
To be paid directly to BIS |
|
3. |
License Fee |
1000 |
To be paid directly to BIS |
|
4. |
Sample Testing Fee |
As Applicable |
To be paid directly to BIS (Testing charges vary by product and lab). |
|
5. |
Minimum Advance Marking Fee |
As per actual |
To be paid directly to BIS (Marking fee varies as per Indian Standard) |
|
6. |
Renewal Fee |
1000 |
To be paid directly to BIS |
|
7. |
Inclusion Fee |
5000 |
To be paid directly to BIS |
|
8. |
ERCS Pvt Ltd Service Fee |
Please contact info@elitasrcs.com |
|
Why Choose ERCS as Your BIS Certification Consultant for Fabric Steamer?
When you select ERCS Private Limited as your BIS consultant, you get an easy compliance process for your fabric steamers. The company has extensive expertise in this area and offers a full range of services, so you won’t waste any money.
- Advising on compliance with BIS standards: Guidance on meeting BIS requirements for your fabric steamers in accordance with the relevant Indian standard.
- Providing Complete Document Support: Assisting with preparing, reviewing, and submitting the required documents for the BIS application.
- Providing Assistance in Testing: Cooperating with laboratories working with BIS-approved standards.
- A Faster Application Process: Ensuring the correct filing of the certification application and monitoring its processing.
- Providing Assistance for Manufacturers and Importers: Helping manufacturers produce steamers and assisting companies to succeed in India.
- Providing Comprehensive Support: Guiding throughout the entire certification process.