BIS Certification for Pipe Wrenches Heavy Duty IS 4003 Part 2

BIS is highly crucial for manufacturers as it guarantees that the manufactured products come under strict quality and safety criteria. Tool industries mostly come under that list in which there is a huge requirement for product assurance regarding its quality and performance. For example, the manufacturer of the Heavy Grip Wrench—4003 (Part 2): 1986 can enhance the reliability of their product through BIS certification. It Ensures that the product does not violate the set norms related to safety, quality, and performance parameters. 

 

Involving a BIS consultant can be very helpful for producers in getting products certified, in the case of a pipe wrench. Consultants will acquaint themselves with relevant standards, put all the requirements together, and take the manufacturers through the technical requirements. Their professionalism makes it possible to avoid costly mistakes that may have occurred and reduces testing and approval delays. When consultants take the compliance process off their hands, they free manufacturers to focus better on production, resulting in easier, quicker access to markets and a stronger competitive position.

 

Overview: Pipe Wrench 4003 Part 2 With BIS Certificate

Indian Standard IS 4003 (Part 2) incorporates the production, along with mechanical and chemical specifications, and testing of wrenches. It takes care of whether the products meet Indian standards or not.

 

QCOs of the Government of India mandate the use of the Standard Mark under a License or CoC. The Department for Promotion of Industry and Internal Trade has issued the Hand Tools (Quality Control) Order 2024, of the Ministry of Commerce and Industry.

Here's the list of parameters or characteristics on which the products are tested:

• Dimensional Accuracy
• Material Composition
• Mechanical Properties
• Surface Finish
• Hardness
• Functional Performance
• Strength and Durability
• Tensile Properties
• Resistance to Corrosion
• Load-Bearing Capacity

 

License Scope: A license is granted for the use of the Standard Mark by IS 4003 (Part 2): 1986 for the following products:

Product Name: Pipe Wrenches—Heavy Duty

Type: This category includes high-duty pipe wrenches according to IS 4003 (Part 2): 1986 specifications. Manufactured for heavy industrial usage, these offer very good strength and gripping abilities, thereby ensuring better performance with high usage.

 

BIS Certification Process for Pipe Wrenches – Heavy Duty IS 4003 Part 2

If you are a manufacturer, you must keep the BIS Certification in mind. The process is described briefly below:

• Identification of the Product: Access the list of BIS-required items by logging into the BIS website.
• Select IS: To understand what IS is pertinent to the kinds of goods you produce
• Producer Signing up: Give BIS information about your production facility, such as the name of the company, product information, etc.
• Submission: Certification Application Submission of necessary papers, such as product information, manufacturing process details, and test reports when applicable, is required.
• Testing: The BIS sends a sample of your product for testing to an approved laboratory. This could be outside or an in-house laboratory that you may have if approved by the BIS. Alternatively, it may be conducted in an approved laboratory of the BIS.
• BIS may pay a visit to your production facility to assess adherence to quality controls.
• Certification Grant: If a product meets the IS standards requirement, BIS will grant certification.
• Surveillance: BIS regularly conducts surveillance to obtain assurance of ongoing compliance.
• Renewal: A certification is valid for a period of one to five years. Before the expiration of certification, renewal must be requested.

 

Timeline of BIS Certification of Wrenches IS 4003 Part-2

After applying for BIS approval, it's critical to understand when your items will be certified.

• BIS Certification India (standard timeframe: 30 days)
• BIS Certification for Foreign Manufacturers (standard timeframe: 180 days)

 

BIS License requirements for Iron Clad Pipe Wrench 

These are the requisites to get the BIS license for the above-mentioned products:

• Conformity of Raw Material as Per IS 4003 (Part 2)
• In-house testing laboratory for mandatory tests
• Competent quality control personnel

 

There are 3 major categories of documents required to get the BIS license for adherence to the BIS guidelines for these pipe wrenches

• Administrative Details
• Technical Details
• Quality Control Personnel Details

 

BIS License Cost for pipe wrenches Certification in India

BIS certification cost for pipe wrenches, Heavy Duty 4003 part-2 under the Product Certification (Scheme-I) of BIS:

COST FOR BIS REGISTRATION / ELECTRONICS PRODUCTS (Government Costs)
Type of Fee	New Application	Renewal	Inclusion
Application Fee	1000	1000	1000
Processing Fee*	25,000x2 = 50,000	25,000x2 = 50,000	15,000x2= 30,000
Registration Fee*	1000 x 2 = 2000	1000 x 2 = 2000	1000 x 2 = 2000
Total	53,000	53,000	30,000
Note* 1. The processing fee and registration fee need to be paid within 2 years, as registration numbers will be granted initially for two years. 2. The cost of BIS registration will depend on the following factors: · Location and Name of the Manufacturing Process (Overseas/ Domestic) · Types of Products and model quantity · Testing fee for the products · Govt. Fee (BIS) and ERCS Service fee

Product testing, which establishes if the product's quality satisfies Indian standards, is the most crucial step in the BIS certification process. To establish test equipment for internal production test laboratories, testing facilities must be invested in for the same reason.

 

Along with the fees listed in the table above, we might also ask you to cover the cost of a pre-visit to your factory to make sure your product complies with the applicable Indian Standards and BIS standards for its BIS certification.

 

BIS Certification Benefits for Industrial Pipe Wrench

There are certain benefits of getting ISI Mark for your manufactured products; they are: 

• When a product bears the "ISI mark," it indicates that it satisfies the government's quality standards. The product must receive the ISI Mark and those who do not comply face material confiscation and hefty fines.
• Obtaining certification increases the likelihood that your product will endure and compete in the marketplace.
• Because ISI-certified products guarantee safety and standard quality, customers are more likely to purchase them. Therefore, you can gain the buyer's faith and trust by offering certified products.
• You can build your reputation in the industry by relying on the recommendations of this clientele.
• Therefore, you can compare the product's market value and raise the bar with a well-known brand.

 

Role of ERCS Private Limited in getting your product certified:

The manufacturer must make sure that their product complies with the Indian Standard Specifications (ISS), which we translate for you directly from the BIS officials by the Indian Standards, to receive BIS certification and produce a product of standard quality. Throughout the entire process of obtaining your product authorized by the relevant departments or authorities, ERCS Private Limited will be your friend, advisor, and mentor.

 

Scope of work by ERCS Private Limited:

• Make sure your product complies with IS 4003 (Part 2): 1986

To help ensure that wrenches with IS 4003 (Part 2): 1986, BIS Consultant in India has established a wide network inside the industry and several BIS departments.

 

• Documentation that is efficient and mindful of the BIS guidelines:

To help the industry get BIS certifications, guidelines have been created. Our staff has completed more than 100 projects and has a variety of industry contacts. We can accurately and efficiently document your product according to the BIS requirements since we comprehend the Indian Standard Specifications and BIS recommendations, which we interpret for the Quality Control Personnel.

 

• You can pay for a pre-visit at your factory:

The officer from the BIS authority inspects the factory as part of the BIS certification process. For the BIS inspection to be successful, there must be no non-conformities. To make the necessary adjustments to eliminate the elements of fallibility, our team will plan a pre-visit to your industrial premises while keeping this objective in mind.

 

• Support for audits of BIS:

We will walk you through the entire BIS inspection process and let you know what needs to be ready and accessible when the inspection takes place.

 

Similar mandatory products for BIS certification are as below:

• BIS Certificate for Chain Pipe Wrenches - IS 4123
• BIS Certificate for Open Ended Slugging Wrenches (Spanners) - IS 4508
• BIS Certificate for Ring Slugging Wrenches (Spanners) - IS 4509
• BIS Certificate for Single-Ended Open-Jaw adjustable Wrench - IS 6149
• BIS Certificate for Open Jaw Wrenches (Spanners) - IS 2028
• BIS Certificate for Ring Wrenches (Spanners) - IS 2029
• BIS Certificate for Pipe Wrenches General Purpose - IS 4003 (Part 1)
• BIS Certificate for Combination Side Cutting Pliers - IS 3650