BIS Certification for
Water- Bed Heaters is 302 Part 1:2024/IEC 60335-1
IS 302 Part 1:2024/IEC 60335-1
BIS Certification is compulsory under Indian law, as governed by the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, for the importation or manufacture of water-bed heaters. For the legal sale or import of these heaters in India, the manufacturer must comply with the IS 302 (Part 1): 2024 standard, harmonised with IEC 60335-1. This includes testing the appliance and inspecting the manufacturing facility. Failure to hold an active BIS license is a criminal offence that can lead to seizures at customs, hefty fines, or a product ban.
Water-bed heaters are specialised equipment designed to provide warmth and comfort for water beds, improving the sleeping experience by controlling temperature. It ensures consumer trust in the reliability and quality of the water-bed heaters. Manufacturers and importers can start BIS Certification under Scheme-I well ahead of the phased effective dates (1st October 2026 for General manufacturers, 1st January 2027 for Small manufacturers, 1st April 2027 for micro manufacturers).
What are the BIS Testing Parameters for Water- Bed Heaters under IS 302 (Part 1):2024/IEC 60335-1?
A water bed heater is associated with user health; it must be tested rigorously. Manufacturers must ensure their appliances are tested in a BIS-recognised lab as per the IS 302 Part 1/iec 60335-1to ensure safety and quality. Some of these tests are listed below:
- Earth continuity test: This test verifies the low resistance between the appliance and accessible metal parts, ensuring that internal wires contact the outer casing and that electrical current flows safely to ground without creating short circuits.
- Electric strength test: This test verifies the integrity of the electrical insulation between live parts and accessible metal, ensuring it does not break down.
- Functional test: It verifies that the temperature controls and other heating elements operate properly under everyday conditions.
- Power Input and Current: Verify that the heater should not draw more power than it is rated for to prevent overloading.
- Construction: Verify the design and the material used to ensure appliance wires are protected from moisture ingress, and plastic can withstand the high temperature
- Provision for earthing: Check that the physical earthing terminals and connections are properly designed.
What Is the BIS Certification Process for Water-Bed Heaters in India?
To understand the comprehensive process for obtaining the BIS ISI mark, both Indian and foreign manufacturers need to understand the BIS Certification procedure. The complete certification process is given below:
- BIS Certification Process for Indian Manufacturers
- https://www.elitasrcs.com/services/fmcs-foreign-manufacturer-certification-scheme
What is the Cost of BIS Certification for Water-Bed Heaters in India (2026)?
|
S No. |
Particular |
Amount (INR) |
Remarks |
|
1. |
Application Fee |
1000 |
To be paid directly to BIS |
|
2. |
Audit Fee |
7000 |
To be paid directly to BIS |
|
3. |
License Fee |
1000 |
To be paid directly to BIS |
|
4. |
Sample Testing Fee |
As Applicable |
To be paid directly to BIS (Testing charges vary by product and lab). |
|
5. |
Minimum Advance Marking Fee |
As per actual |
To be paid directly to BIS (Marking fee varies as per Indian Standard) |
|
6. |
Renewal Fee |
1000 |
To be paid directly to BIS |
|
7. |
Inclusion Fee |
5000 |
To be paid directly to BIS |
|
8. |
ERCS Pvt Ltd Service Fee |
Please contact info@elitasrcs.com |
|
Why Choose ERCS as Your BIS Certification Consultant?
BIS Certification of Commercial Electric Rinsing Sinks as per IS 302 (Part 1), by engaging ERCS Private Limited as your BIS consultant, ensures the best possible process for achieving the ISI mark.
- Consultation for BIS: Professional consultancy for BIS Compliance of water bed heater according to IS 302 (Part 1):2024, IEC 60335-1:2020, and applicable product standard.
- Document Preparation and Submission: Form filling, preparation, and submission of the application form, technical documents, test report, user manual, and other requisite documents.
- Testing Arrangement and Support: Testing at a BIS-approved laboratory and support in resolving technical problems after testing.
- Preparation and Submissions of Application: Proper submission of the BIS application in accordance with all the requirements of BIS and Quality Control Orders (QCOs).
- Support in BIS Factory Audits: Complete support for BIS factory audits and providing information about the quality management system, manufacturing process, and testing facility.
- Clearance of BIS Queries: Assistance in clearing the queries of BIS, corrective actions and non-conformities during the process of certification.