BIS Certification for Reinforced Gypsum Plaster Boards IS 2095 Part-3
Category: BIS Certification
Introduction to Indian Standard IS 2095 Part 3; Reinforced gypsum plaster boards. This standard specifies the manufacturing, chemical and physical requirements and testing of Reinforced gypsum plaster boards.
- Raw material shall conform to the following points –
a) Gypsum Plaster shall confirm clause 4.1
b) Fibres shall confirm clause 4.2
Specification for IS 2095 Part 3 Certificate under Scheme-I
IS 2095 Part 3 specifies the quality parameters or characteristics of the Reinforced gypsum plaster boards as follows
(I) Dimension
(ii) Gypsum Plaster
(iii) Fibre
(iv) Finish
(v) Density
(vi) Flexural Breaking Load
(vii) Impact Strength
(viii) Water absorption
(ix) Jolting Test
Mandate for ISI Mark Certification of Reinforced gypsum plaster boards (IS 2095 Part 3) :
- Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Commerce and Industry after consulting the Bureau of Indian Standards has issued the Quality control order.
- As per the Quality control order, all the manufacturers of Reinforced gypsum plaster boards are obligated to obtain ISI Mark Certification.
Types of Reinforced Gypsum Plaster Boards for BIS Approval
|
“Licence is granted to use Standard Mark on Coated and Laminated gypsum plaster boards as per IS 2095 Part 2:2022”. |
|
|
Types / Scope of license |
Size – Type of gypsum board – Laminating/Coating Material - |
BIS Licensing Process for Reinforced gypsum plaster boards
Procedure to obtain BIS Certification of Reinforced gypsum plaster boards to use the ISI mark as per IS 2095 Part 3
- BIS Certificate for Indian Manufacturers (Standard Timeframe – 30 days)
- BIS Certificate for Foreign Manufacturers (Standard Timeframe – 180 days)
BIS Requirements for Reinforced Gypsum Plaster Boards Certification
Requirements to get the BIS license for Reinforced gypsum plaster boards
- Conformity of Raw Material as per IS 2095 Part 3
- In-house testing laboratory for mandatory tests
- Competent Quality Control Personnel
- Adherence to the BIS guidelines for Reinforced gypsum plaster boards as per Indian standard IS 2095 Part 3
- There are 3 major categories of document required to get the BIS license:
a. Administrative Details
b. Technical Details
c. Quality Control Personnel Details
d. Commercial Details
ISI certification Cost for IS 2095 Part 3 Paroduct
Expenses involved in obtaining BIS certificate for Reinforced gypsum plaster boards as per IS 2095 Part 3 under the Product Certification (Scheme-I) of BIS :
|
COST FOR BIS REGISTRATION / ELECTRONICS PRODUCTS (Government Costs) |
|||
|
Type of Fee |
New Application |
Renewal |
Inclusion |
|
Application Fee |
1000 |
1000 |
1000 |
|
Processing Fee* |
25,000x2 = 50,000 |
25,000x2 = 50,000 |
15,000x2= 30,000 |
|
Registration Fee* |
1000 x 2 = 2000 |
1000 x 2 = 2000 |
1000 x 2 = 2000 |
|
Total |
53,000 |
53,000 |
30,000 |
|
Note* 1. The processing fee and registration fee need to be paid within 2 years, as registration numbers will be granted initially for two years. 2. The cost of BIS registration will depend on the following factors: · Location and Name of the Manufacturing Process (Overseas/ Domestic) · Types of Products and model quantity · Testing fee for the products · Govt. Fee (BIS) and ERCS Service fee |
|||
- In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards
- For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
- Apart from the charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.
Role of ERCS Private Limited in getting your product certified :
To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product follows the specified Indian Standard Specifications (ISS), which we directly interpret to you from the BIS officials as per the Indian Standards. ERCS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.
Scope of work by ERCS Private Limited:
a. Ensuring the conformity of your product as per IS 2095 Part 3:
ERCS Pvt Ltd has developed a vast network within the Gypsum Plaster Products Industry, various BIS departments to assist for ensuring conformity of the product Reinforced gypsum plaster boards according to IS 2095 Part 3.
b. Effective documentation with awareness of the BIS guidelines:
- In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 1000 projects and technically competent associates in various Industries.
- We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.
c. A pre-visit can be paid at your factory premises:
In the process of getting BIS certification, the officer from the BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that the required changes can be adapted so as to remove the elements of fallibility.
d. Assistance for BIS audits:
We will explain the whole procedure of conducting a BIS inspection and make you aware of the things that need to be prepared and readily available at the time of inspection.
Benefits of getting ISI Mark for Reinforced gypsum plaster boards to sell in Indian Market with our help
§ The term “ISI mark" means that a certain product conforms to the quality standards set by the government.
§ It is compulsory for Reinforced gypsum plaster boards to obtain the ISI Mark, and the violators are penalised with the material seize and a significant sum as fine.
§ Getting certification improves the probability of your product surviving and competing in the market.
§ Customers have a tendency to buy ISI-certified products as it ensures safety and standard quality. Hence, with the certified products, you can win the confidence and trust of the buyer.
§ With the word of mouth of such client list, you can establish your credibility in the market.
§ Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.