Mandatory
Non Electric Toys and Electric Toys IS 9873 PART1 (2,3,4,7,9) & IS 15644
IS 9873 Part 1 (2,3,4,7,9) & IS 15644 cover Non Electric and Electric Toys. This Indian Standard is published in several parts
Introduction to Indian Standard IS 9873 Part 1 (2,3,4,7,9) and IS 15644; Non- Electric and Electric Toys. IS 9873 Part 1 (2,3,4,7,9) & IS 15644 cover Non Electric and Electric Toys. This Indian Standard is published in several parts. The other parts in this series are:
Part 1 Safety aspects related to mechanical and physical properties
Part 2 Flammability
Part 3 Migration of certain elements
Part 4 Swings, slides and similar activity toys for indoor and outdoor family domestic use
Part 5 Determination of total concentration of certain elements in toys
Part 6 Determination of certain phthalate esters in toys and children’ s products
Part 7 Requirements and test methods for finger paints
Part 8 Age determination guidelines (under print)
Part 9 Certain phthalate esters in toys and children’ s products.
IS 15644, this Indian Standard which is identical with IEC 62115 ( 2003) ‘Electrical toys — Safety’ issued by the International Electro-technical Commission ( IEC ) was adopted by the Bureau of Indian Standards on the recommendation of the Electrical Appliances Sectional Committee and approval of the Electrical Division Council.
Specification for IS 9873 PART-1
IS 9873 Part 1 (2,3,4,7,9) & IS 15644 specifies the quality parameters or characteristics of the Non Electric and Electric Toys as follows
- Material Quality
- Expanding Materials
- Small Parts
- Shape, size and strength of certain toys
- Squeeze toys, rattles, fasteners, and certain other toys and components of toys
- Toy pushchairs, perambulators and similar toys
- Hinge line clearance
- Circular holes in rigid material
- Other driving mechanisms
- Winding Keys
- Springs
- Stability and overload requirements
- Enclosures
- Ventilation
- Toys that enclose the head
Mandate for ISI Mark Certification of Non Electric and Electric Toys
- Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Commerce and Industry, Department for Promotion of Industry and Internal Trade after consulting the Bureau of Indian Standards has issued the Cement (Quality control) order.
- As per the Toys (Quality control) order, all the manufacturers of Non Electric and Electric Toys are obligated to obtain ISI Mark Certification.
Procedure to use ISI mark as per IS 9873 Part 1 (2,3,4,7,9) & IS 15644
BIS Certification India for Indian Manufacturers (Standard Timeframe – 30 days)
BIS FMCS Certification for Foreign Manufacturers (Standard Timeframe – 180 days)
Requirements to get the BIS license for Non-Electric and Electric Toys
- Conformity of Raw Material as per IS 9873 Part 1 (2,3,4,7,9) & IS 15644
- In-house testing laboratory for mandatory tests
- Competent Quality Control Personnel
- Adherence to the BIS guidelines for Non Electric and Electric Toys as per Indian standard IS 9873 Part 1 (2,3,4,7,9) & IS 15644
- There are 3 major categories of document required to get the BIS license:
- Administrative Details
- Technical Details
- Quality Control Personnel Details
- Commercial Details
Cost of ISI mark Certification for IS 9873 PART1 (2,3,4,7,9) & IS 15644
Expenses involved in obtaining BIS certificate for Non Electric and Electric Toys as per IS 9873 Part 1 (2,3,4,7,9) & IS 15644 under the Product Certification (Scheme-I) of BIS :
|
S No. |
Particular |
Amount (INR) |
Remarks |
|
1. |
Application Fee |
1000 |
To be paid directly to BIS |
|
2. |
Audit Fee |
7000 |
To be paid directly to BIS |
|
3. |
License Fee |
1000 |
To be paid directly to BIS |
|
4. |
Sample Testing Fee |
As Applicable |
To be paid directly to BIS (Testing charges vary from product to product and lab to lab.) |
|
5. |
Minimum Advance Marking Fee |
As per actual |
To be paid directly to BIS (Marking fee varies as per Indian Standard) |
|
6. |
Renewal Fee |
1000 |
To be paid directly to BIS |
|
7. |
Inclusion Fee |
5000 |
To be paid directly to BIS |
|
8. |
ERCS Pvt Ltd Service Fee |
Please contact info@elitasrcs.com |
|
|
Remarks |
Including all the taxes |
||
- In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
- For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
- Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.
Role of ERCS Private Limited in getting your product certified :
To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards. ERCS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.
Scope of work by ERCS Private Limited:
- Ensuring the conformity of your product as per IS 9873 Part 1 (2,3,4,7,9) & IS 15644:
ERCS Pvt. Ltd. has developed a vast network within the Toys Industry & various BIS departments to assist for ensuring conformity of the product Non Electric and Electric Toys according to according to IS 9873 Part 1 (2,3,4,7,9) & IS 15644.
- Effective documentation with the awareness of the BIS guidelines:
In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries.
We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.
- A pre-visit can be paid at your factory premises:
In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.
- Assistance for BIS audits:
We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.
Benefits of getting ISI Mark for Non Electric and Electric Toys to sell in Indian Market with our help
- The term “ISI mark" means, that a certain product conforms to the quality standards set up by the government.
- It is compulsory for Non Electric and Electric Toys to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.
- Getting certification improves the probability of your product to survive and compete in the market.
- Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.
- With the word of mouth of such client list, you can establish your credibility in the market.
- Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.