Mandatory
Leather Safety Footwear Having Direct Moulded Rubber Sole IS 11226
Introduction to Indian Standard IS 11226; Leather Safety Footwear having Direct Moulded Rubber Sole. IS 11226 cover Leather Safety Footwear having Direct Moulded Rubber Sole. This standard specifies the manufacturing, chemical and physical requirements and testing of Leather Safety Footwear having Direct Moulded Rubber Sole.
Specification of IS 11226
IS 11226 specifies the quality parameters or characteristics of the Leather Safety Footwear having Direct Moulded Rubber Sole as follows
- Upper Leather
- Insole
- Stiffener
- Threads
- Grinderies
- Lasting tacks
- Shanks
- Eyelets
- Cotton Newar
- Toe compound laces
- Steel Toe cap
- Rubber Sole & Heel
- Mass
- Performance test
- Adhesion test and others
Mandate for ISI Mark Certification of Leather Safety Footwear having Direct Moulded Rubber Sole (IS 11226) :
Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Commerce and Industry, Department for Promotion of Industry and Internal Trade after consulting the Bureau of Indian Standards has issued the Quality control order.
As per the Quality control order, all the manufacturers of Leather Safety Footwear having Direct Moulded Rubber Sole are obligated to obtain ISI Mark Certification.
Types of Leather Safety Footwear covered under IS 11226
|
“Licence is granted to use Standard Mark on Leather Safety Footwear having Direct Moulded Rubber Sole as per IS 11226: 1993”. |
|
|
Types / Scope of License |
Type – 1/2/3/other Modified design Sizes – as applicable Other additional requirement |
Procedure to obtain BIS Certification of Leather Safety Footwear having Direct Moulded Rubber Sole to use ISI mark as per IS 11226
- BIS License for Indian Manufacturers (Standard Timeframe – 30 days)
- BIS FMCS License for Foreign Manufacturers (Standard Timeframe – 180 days)
Requirements to get the BIS license for Leather Safety Footwear having Direct Moulded Rubber Sole
- Conformity of Raw Material as per IS 11226
- In-house testing laboratory for mandatory tests
- Competent Quality Control Personnel
- Adherence to the BIS guidelines for Leather Safety Footwear as per Indian standard IS 11226
- There are 3 major categories of document required to get the BIS license:
- Administrative Details
- Technical Details
- Quality Control Personnel Details
- Commercial Details
Cost of BIS License for IS 11226
Expenses involved in obtaining BIS certificate for Leather Safety Footwear having Direct Moulded Rubber Sole as per IS 11226 under the Product Certification (Scheme-I) of BIS :
|
S No. |
Particular |
Amount (INR) |
Remarks |
|
1. |
Application Fee |
1000 |
To be paid directly to BIS |
|
2. |
Audit Fee |
7000 |
To be paid directly to BIS |
|
3. |
License Fee |
1000 |
To be paid directly to BIS |
|
4. |
Sample Testing Fee |
As Applicable |
To be paid directly to BIS (Testing charges vary from product to product and lab to lab.) |
|
5. |
Minimum Advance Marking Fee |
As per the actual |
To be paid directly to BIS (Marking fee varies as per Indian Standard) |
|
6. |
Renewal Fee |
1000 |
To be paid directly to BIS |
|
7. |
Inclusion Fee |
5000 |
To be paid directly to BIS |
|
8. |
ERCS Pvt Ltd Service Fee |
Please contact info@elitasrcs.com |
|
|
Remarks |
Including all the taxes |
||
- In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
- For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
- Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.
Role of ERCS Private Limited in getting your product certified :
- To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.
- ERCS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.
Scope of work by ERCS Private Limited:
- Ensuring the conformity of your product as per IS 11226:
ERCS Pvt. Ltd. has developed a vast network within the Footwear Industry & various BIS departments to assist for ensuring conformity of the product Leather Safety Footwear having Direct Moulded Rubber Sole according to according to IS 11226.
- Effective documentation with the awareness of the BIS guidelines:
In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries.
We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.
- A pre-visit can be paid at your factory premises:
In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.
- Assistance for BIS audits:
We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.
Benefits of getting ISI Mark for Leather Safety Footwear having Direct Moulded Rubber Sole to sell in Indian Market with our help
- The term “ISI mark" means, that a certain product conforms to the quality standards set up by the government.
- It is compulsory for Leather Safety Footwear having Direct Moulded Rubber Sole to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.
- Getting certification improves the probability of your product to survive and compete in the market.
- Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.
- With the word of mouth of such client list, you can establish your credibility in the market.
- Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.