BIS certification for IS 2062 Part 2 is Important for manufacturers and importers of structural steel hot-rolled, quenched and tempered plates, sheets, strips, and wide flats in India. Issued by the Bureau of Indian Standards, this certification ensures that steel products meet the required quality standards. Compliance with IS 2062 not only ensures conformity with Indian Standards but also enhances product credibility and builds trust among buyers across industries.


According to the relevant Indian standards, manufacturers, importers, and foreign exporters, before selling their products in the Indian market, can obtain BIS Certification. This process involves product testing, factory inspection, and product classification. This standard applies to quenched and tempered steel sheets, which are commonly used in heavy fabrication bridges, infrastructure, and industrial constructions.

 

What is IS 2062?

IS 2062 Part 2: Structural steel certification specifies the quality requirements for welded or bolted structures as per the Indian Standard. Steel appliances offer high tensile strength and durability, along with parameters such as chemical composition, mechanical properties, dimensions and tolerance.

  • These steels are widely used in:
  • Infrastructures and construction projects
  • In building bridges and buildings
  • Heavy engineering and fabrications

Compliance with IS 2062 ensures uniformity and reliability of structural steel.

 

Who Needs BIS Certification IS 2062 (Part 2)?

The ISI certification for structural steel IS 2062 Part 2 is important for both domestic manufacturers and foreign importers supplying this steel in India. This certification ensures safety in construction and compliance with requirements for both manufacturing and importing units.

  • Indian Manufacturers:  Indian manufacturers dealing with steel products.
  • Foreign manufacturers: All overseas steel manufacturers in India must appoint an AIR under the FMCS license scheme.
  • Importers:  Steel importers who are supplying infrastructure projects.
  • Traders: Trading companies that resell imported structural steel.

 

Testing Requirements for Structural Steel 

As product testing is essential for IS 2062-2 products, all testing must be conducted at a BIS-accredited laboratory. The required tests are listed below in a table:

s. no 

Test Name

Purpose

Key Parameters to be considered

1.

Chemical compositions

These are used to verify the chemical composition

Manganese, sulphur, nickel, carbon, and phosphorus

2.

Tensile Strength Test

Verify durability and strength

It yields strength and elongations 

3.

Dimension and Tolerance Inspections

To ensure and verify the size accuracy

Verify the thickness, width and length.

4.

Bend Test

It assesses the material ductility

Ensures there is no crack during the bending.

5.

Marking and identification

Ensure its traceability

Details mentioned, such as heat number and grade.

 

Validity and Renewal of BIS License

To verify the license validity period, manufacturers should check the license number on the BIS online portal:

  • Validity period: The BIS license for steel products is usually valid for 1-2 years.
  • Renewal period: Manufacturers should submit renewal applications 3 months (90 days) before the expiry date to avoid penalties.

 

Common Challenges in BIS Certification?

The common challenges faced by manufacturers and importers at the time of product approvals are mentioned below:-

  • Incorrect classification of products
  • Incomplete documents at the time of submission
  • Pre-testing your product sample at a BIS-accredited lab can significantly reduce the risk of rejection.
  • Frequent changes in government regulations or in QCOs)
  • Appointing an Authorised Indian Representative (AIR) for foreign manufacturers often leads to delays in establishing an Indian representative.
  • Many manufacturers face delays due to incomplete test reports and non-compliant factory setups.

 

Why Hire a BIS Consultant?

  • The process of obtaining ISI mark certification in India is usually complex, but hiring a professional consultant can make your journey easier:
  • A professional consultant will provide an overview of the process, giving you time to prepare the documentation and understand it.
  • Helps in coordinating with BIS-approved laboratories.
  • Prepare all the documents and make them ready at the time of application submission.
  • Prepare yourself early for the factory inspection 
  • Inform you about the frequent changes in the Quality Control Order (QCO)

With deep knowledge and expertise in steel appliances certification, ERCS ensures a smooth, hassle-free process.

 

Conclusions

Obtaining BIS Certification for IS 2062 (Part 2) structural steel hot-rolled, quenched and tempered plates, sheets, strips, and wide flats can provide compliance, quality, and market access in India. From testing and documentation to factory inspection and final approval, every step is crucial for achieving certification. Compliance with Bureau of Indian Standards regulations helps manufacturers align with established benchmarks, build trust, and gain seamless market access.

Not sure whether your steel products fall under IS 2062 Part 2? Contact ERCS for a free consultation before applying, and we will offer document preparation and factory inspection.