BIS Certification for Viscose Staple Fibres

Obtaining BIS certification for Viscose Staple Fibres is necessary as per IS 17266. VSF is a regenerated cellulosic fiber made from wood pulp, a sustainable natural resource and is biodegradable and environmentally friendly. The availability of raw materials and the low cost of chemical agents, as well as satisfactory textile properties and wide possibilities of modification, ensure that the production of viscose fibres is economical and widely used. 

Depending on the intended use, viscose fibres are made into textile or cord threads, as well as staples. The production process consists of the following basic technological operations: Such as Production of spinning solution (viscose), Forming threads by the wet method, and Trimming and drying.

The central government issued a Quality Control Order (QCO) mandating ISI Mark Certification for viscose staple fibre (VSF), considering it essential or expedient in the public interest.

What is Bureau of Indian Standards (BIS) for Viscose Staple Fibres?

The Bureau of Indian Standards (BIS) is the National Standards Body of India that develops and publishes Indian Standards, implements Conformity Assessment Schemes, recognises & runs laboratories for Conformity Assessment, implements Hallmarking, Works for Consumer empowerment, conducts capacity-building programs on quality assurance and represents the country in ISO & IEC.

1. In exercise of the powers conferred by section 16 and section 17 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after consultation with the Bureau of Indian Standards, published the BIS QCO for Viscose Staple Fibres 2025.

2. As per this (Quality control) order, all the manufacturers of Viscose Staple Fibres are obligated to bear the Standard Mark under a license from the Bureau in accordance with Scheme-I of Schedule-II to the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018.

3. Penalty for contravention. – Any person who contravenes the provisions of this Order shall be punishable in accordance with the provisions of the said Act.

Fabrics made of viscose fibers are easily dyed and have excellent hygienic properties (hygroscopicity), which is especially important for goods made for public use. The availability of raw materials and the low cost of chemical agents, as well as satisfactory textile properties and wide possibilities of modification, ensure that the production of viscose fibers is economical and widely used.

In the production of popular goods, viscose fibers are widely used for finishing silk and staple fabrics, knitwear and multi-purpose fabrics made from combinations of viscose fibers with cotton or wool, as well as with other synthetic fibers. High strength viscose cord is used for a wide range of technical goods. For example, replacing the cotton cord in tires with a high-strength viscose cord increases the life of the tire and reduces the amount of rubber needed to manufacture it.

Viscose staple fibre products :

• Clothing: Accessories, blouses, dresses, jackets, underwear, linings, headwear, trousers, sports shirts, sportswear, suits, ties, work clothes.
• Furnishings: Bedspreads, blankets, curtains, curtains, sheets, bedspreads, tablecloths, upholstery.
• Industrial use: Industrial products, medical-surgical products, non-woven products, tire cord.
• Other uses: Feminine hygiene products, baby wipes and kitchen wipes.

Features of VSF

• Traits description
• Excellent performance

The performance of VSF is close to natural cotton fiber, it has good moisture absorption, breathability, dyeability, anti-static and soft texture, especially moisture absorption and air permeability, synthetic fibers cannot compare with it.

Good functional characteristics

VSF also had the characteristics of synthetic staple fibers. The gloss, chromatography, heat, corrosion of VSF are much better than synthetic, so the fabric made by VSF has beautiful colors and dynamic suspension.

Obvious environmental advantages

GlVSF is a biomass fiber, its waste can be naturally degraded and does not cause second pollution, the environmental benefits are obvious.

Strong material renewable

Cotton linter, wood, bamboo and hemp; renewable, recyclable agriculture and forestry resources are the main raw materials for VSF, the sustainability of VSF is superior to synthetic fibers that extract non-renewable petroleum as raw material.

The following are the Testing parameters:

• Identification  - IS 667
• Denier - IS 234    
• Conditional Tenacity - IS 235
• Whiteness (Berger) - IS 1060
• Length - IS 4807
• Spinning Faults - IS 17266
• Shirley Faults - IS 4871
• Moisture - IS 17266
• Oil Pick up - IS 17266
• Ph - IS 1390
• Freedom from defects - IS 17266
• Commercial Mass - IS 17266, IS 6741

Possible Tests in a day :

• Spinning Faults
• Whiteness (Berger)
• Oil Pickup
• pH
• Identification of Fibre
• Freedom from defects

What are the benefits of BIS Certification for Viscose Staple Fibres products?

Benefits of getting ISI Certification for Viscose Staple Fibres products to sell in the Indian Market with our help

• BIS Certification means that a certain product conforms to the quality standards set up by the government.
• It is compulsory for Viscose Staple Fibres to obtain the BIS License and the violators are penalized with the material seize and a significant sum as a fine. Getting certification improves the probability of your product to survive and compete in the market.
• Customers tend to buy BIS-certified products as they ensure safety and standard quality. Hence, with certified products, you can win the confidence and trust of the buyer.
• With the word of mouth of such a client list, you can establish your credibility in the market.
• Hence with a renowned brand, you can raise the standard and benchmark the market value of the product.

Requirements to get the BIS license for Viscose Stable Fibres

• Conformity of Raw Materials as per above mentioned Indian Standards for Viscose Staple Fibres
• In-house testing laboratory for mandatory tests
• Competent Quality Control Personnel
• Adherence to the BIS guidelines for Viscose Staple Fibres as per the mentioned Indian standards

There are 4 major categories of documents required to get the BIS license:

a.   Administrative Details

b.   Technical Details

c.    Quality Control Personnel Details

d.   Commercial Details

Expenses involved in obtaining BIS certificate for Viscose Staple Fibres :

BIS Fee :

• Application Fees
• Audit Charges (Consolidated)
• License Fee
•  Marking Fee

Testing Charges :

• Sample test Fee

In the Indian BIS certification process, product testing is the most crucial stage, as it determines whether the product's quality meets Indian standards.

Consultancy and other charges: Expenses will vary for Indian Manufacturers and foreign manufacturers accordingly, and these costs fall under the BIS FMCS Scheme.

Role of ERCS Private Limited in getting your product certified :

To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product follows the specified Indian Standard Specifications (ISS), which we directly interpret to you from the BIS officials as per the Indian Standards. ERCS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.

It is always better to consult with an experienced team, such as ERCS Pvt. Ltd. fora  smooth certification process. For more information, please feel free to contact us at info@elitasrcs.com or call at +91-9076611770 / +91-9076611766.