USB Socket outlets with USB connections have become immensely popular because they let users connect electrical appliances and charge electronic devices through their USB ports. However, combining socket outlets and USB power supply involves additional considerations from the perspective of electrical safety and product efficiency. IS 19820:2026 was published by the Bureau of Indian Standards (BIS) in October 2026 as Socket-Outlets Incorporating USB Power Supply Specification. The Indian Standard establishes the safety and EMC requirements for fixed and portable socket-outlets incorporating USB power supply.

For BIS compliance of USB socket outlets, importers need to be aware of the standard before planning and testing their products in India.

What is IS 19820:2026?

IS 19820:2026 is an Indian Standard for socket outlets with USB power supply. This is a modified adoption of the IEC 60884-3-1:2021 that specifies safety and EMC requirements for fixed and portable A.C. socket-outlets of more than 50 V and up to 250 V, rated up to 16 A, that incorporate a USB power supply. It is read together with IS 1293:2019. 

This standard should be used along with IS 1293:2019, which applies to plugs and socket-outlets for household and similar applications. IS 19820:2026 lays down the safety and EMC requirements for socket-outlets with USB power supply. It does not provide specifications and dimensional requirements of USB technology. These are provided under the respective IS/IEC 62680 standards series.

What are the Scope and Applicability for IS 19820:2026

IS 19820:2026 applies to fixed and portable AC socket-outlets incorporating a USB power supply. These socket-outlets operate on AC input and provide DC output through a USB port. The manufacturer needs to establish the voltage, current, construction, and application of the product to determine whether IS 19820:2026 is applicable to the device.

The standard applies to devices that have the following characteristics

Parameter

Applicability

Product type

Fixed and portable socket outlets

Power supply

AC only

Rated voltage

Above 50 V and up to 250 V

Rated current

Not exceeding 16 A

Earthing

With or without earthing contact

Intended use

Household and similar purposes

Installation

Indoor or outdoor

Additional feature

Integrated USB power supply

Key BIS Compliance Requirements Under IS 19820:2026

The manufacturer must consider the following during the design and preparation of USB socket outlets for conformity assessment.

1. Electrical Ratings and USB Output

The manufacturer must determine the rated voltage in accordance with the type of electrical installation. In addition, the USB power supply should have clear specifications for output voltage, current, and power rating. The ratings must not exceed the maximum limit of the respective USB connector as per IS/IEC 62680.

2. Product Marking and Labelling

The product and its electrical information, such as USB output power, input frequency, rated input current, output voltage, output current, and the form of the output voltage (if any), must be marked on the product and stated in the manufacturer’s technical documentation.
The minimum conductor size for connection with dedicated USB power supply terminals must be marked on the product or mentioned in the manufacturer’s technical documentation. The standard further requires that these accessories shall not be marked with the Class II construction symbol.

3. Protection Against Electric Shock

The design of the socket outlet shall be such that there is no risk of hazardous live parts during normal use. The design must ensure that a plug cannot connect a hazardous live part to any conductive part of the USB socket.

4. Insulation and Electrical Safety

The product must comply with insulation resistance and electric strength requirements. Manufacturers should focus on separating the USB power circuit from other higher-voltage circuits and insulating internal wiring.

The specified requirements include: 

Test condition

Requirements in IS 19820:2026

Between SELV circuits and other circuits having a higher voltage than SELV

Insulation resistance: 7 MΩ

Between SELV circuits

Insulation resistance: 5 MΩ

Between SELV circuits and other circuits having a higher voltage than SELV

Electric strength: 3,750 V

Between SELV circuits

Electric strength: 500 V

5. Temperature Rise

The standard provides a temperature rise test depending on various modes of operation, including operation of the USB power supply while plugged into the socket outlet. It must meet the specified temperature limits under the test conditions as applicable

6. Mechanical Strength of USB Ports

USB Ports must withstand mechanical stresses and allow compatible connectors to be inserted and removed normally, without mechanical interference or partial insertion.

7. Electromagnetic Compatibility (EMC)

The product should fulfil the appropriate EMC emission and immunity requirements. IS 14700 (Part 3/Sec 2) for low frequency emissions and IS/CISPR 32 Class B for radio frequency emissions. Applicable immunity requirements and electromagnetic field requirements have also been considered.

8. Abnormal Conditions and USB Power-Supply Safety

The USB power supply should not create a safety hazard under abnormal conditions. In addition, the standard also contains requirements for temperature rise under fault conditions, overload testing, and prevention of electric shock in case of fault conditions.
It also mentions requirements for additional components, such as capacitors between primary and secondary circuits, and references IS/IEC 62368-1 and IEC 62368-3.

Testing Requirements Under IS 19820:2026

Product testing is an important tool in ensuring that the USB socket outlet complies with the required safety and EMC requirements. IS 19820:2026 provides a schedule of specimen testing in Table 101, where requirements differ depending on the product.

Key areas to be tested include:

  • Checking product ratings, dimensions, and marking.
  • Protection against electrical shock and earthing provision
  • Terminal and construction requirements.
  • Insulation resistance and electrical strength.
  • Temperature rise under specified operating conditions.
  • Mechanical strength of USB sockets.
  • Heat, humidity, and other environmental condition resistance.
  • EMC emission and immunity requirements.
  • Abnormal condition testing.

Manufacturers need to establish the specific tests to be carried out and the number of specimens based on Table 101 and the standard as a whole.

BIS Compliance Process for Manufacturers and Importers

Manufacturers and importers should follow a planned approach before introducing USB socket outlets into the Indian market.

Step 1: Check Product Applicability

Determine the applicability of IS 19820:2026 to the product in question based on its ratings and design.

Step 2: Review the Standard
An understanding of the requirements of IS 19820:2026, IS 1293:2019 and related standards should be undertaken.

Step 3: Evaluate Product Design
The electrical circuitry, insulation, USB power supply units, enclosure and wiring need to be reviewed to ascertain technical nonconformities.

Step 4: Prepare Technical Documents
Arrange for all relevant documents, including product drawings, product specifications, ratings and labelling details.

Step 5: Arrange Product Testing
Determine the tests to be conducted and arrange for the same at a suitable laboratory using the relevant conformity assessment procedure.

Step 6: Verify Applicability. 
Determine the latest notifications and Quality Control Orders (QCOs) to assess the applicability of certification in the particular case.

Step 7: Complete Applicable Formalities

Proceed with the relevant application, testing, documentation and certification requirements, where applicable.

Common Compliance Challenges for USB Socket Outlet Manufacturers

There may be technical and documentation challenges in combining USB power supply with existing socket outlets, which can lead manufacturers to repeat tests and cause further compliance delays.

Some possible problem areas could be:

  • Incorrect rating: The rated input and USB output may not match the actual conditions.
  • Lack of insulation separation: The design may not meet the required insulation spacing between SELV circuits and other circuits.
  • Temperature rise concerns: The designed combination may cause a temperature increase due to the addition of the USB power supply under certain loading conditions.
  • Insufficient strength of USB ports: The USB connector mounting may not meet the standard's mechanical requirements.
  • EMC test failures: The USB power supply circuit can emit excessive radiation and fail immunity tests.
  • Incomplete technical documentation: Inconsistencies may be found in the product drawings, components, markings and electrical ratings.
  • Overlooking abnormal conditions: The product may not be properly tested for specified abnormal operating and overload conditions.

Conclusion

IS 19820:2026 introduces specific safety and EMC requirements for socket outlets incorporating USB power supply. Manufacturers must consider not only conventional socket-outlet requirements but also additional requirements for the integrated USB power-supply circuit, including insulation, temperature rise, mechanical strength, EMC, and abnormal operating conditions.

A structured compliance approach can help manufacturers identify technical gaps, prepare product documentation and plan the applicable testing and regulatory process.
Whether you are an Indian manufacturer or an importer planning to introduce USB socket outlets into the Indian market, ERCS Private Limited can help you understand the applicable regulatory requirements and plan the next steps. 

For assistance with understanding IS 19820:2026 and the applicable BIS compliance requirements, contact ERCS Private Limited for professional consultancy support.