ISI Certification (BIS) for DUCTILE OR SG IRON CASTINGS IS 1865

BIS CERTIFICATION FOR DUCTILE OR SG IRON CASTINGS IS 1865

1.   Introduction to Indian Standard IS 1865; Ductile or SG iron castings.

·       IS 1865 cover Ductile or SG iron castings. This standard specifies the manufacturing, chemical and physical requirements and testing of Ductile or SG iron castings.

·       IS 1865 specifies the quality parameters or characteristics of the Ductile or SG iron castings as follows

(i)           Chemical Composition

(ii)         Microstructure

(iii)        Freedom from defects

(iv)        Tensile and elongation Test

(v)          Impact test

(vi)        Hardness Test

2.  Types of Ductile or SG iron castings covered under IS                  

3.   Procedure to obtain BIS Certification of Ductile or SG iron castings to use ISI mark as per IS 1865

·       For Indian Manufacturers (Standard Timeframe – 30 days)

·       For Foreign Manufacturers (Standard Timeframe – 180 days)

4.   Requisites to get the BIS license for Ductile or SG iron castings

·       Conformity of Raw Material as per IS 1865

·       In-house testing laboratory for mandatory tests

·       Competent Quality Control Personnel

·       Adherence to the BIS guidelines for Ductile or SG iron castings as per Indian standard IS 1865

·       There are 3 major categories of document required to get the BIS license:

a.   Administrative Details

b.   Technical Details

c.    Quality Control Personnel Details

d.   Commercial Details

5.   Expenses involved in obtaining BIS certificate for Ductile or SG iron castings as per IS 1865 under the Product Certification (Scheme-I) of BIS :

·     In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.

·       For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.

·       Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.

6.   Role of ERCS Private Limited in getting your product certified :

·       To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.

·       ECRS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.

·       Scope of work by ECRS Private Limited:

a.     Ensuring the conformity of your product as per IS 1865:

ERCS Pvt. Ltd. has developed a vast network within the Iron Industry & various BIS departments to assist for ensuring conformity of the product Ductile or SG iron castings according to according to IS 1865.

b.     Effective documentation with the awareness of the BIS guidelines:

In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries.

We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.

c.      A pre-visit can be paid at your factory premises:

In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.

d.     Assistance for BIS audits:

We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.

Benefits of getting ISI Mark for Ductile or SG iron castings to sell in Indian Market with our help

§  The term “ISI mark" means, that a certain product conforms to the quality standards set up by the government.

§  It is compulsory for Ductile or SG iron castings to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.

§  Getting certification improves the probability of your product to survive and compete in the market.

§  Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.

§  With the word of mouth of such client list, you can establish your credibility in the market.

§  Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.